On 10/22/2021 10:03, Matthew Brost wrote:
And to be clear, the engine reset is not supposed to fail. Whether issued by GuC or i915, the GDRST register is supposed to self clear according to the bspec. If we are being sent the G2H notification for an engine reset failure then the assumption is that the hardware is broken. This is not a situation that is ever intended to occur in a production system. Therefore, it is not something we should spend huge amounts of effort on making a perfect selftest for.On Fri, Oct 22, 2021 at 08:23:55AM +0200, Thomas Hellström wrote:On 10/21/21 22:37, Matthew Brost wrote:On Thu, Oct 21, 2021 at 08:15:49AM +0200, Thomas Hellström wrote:Hi, Matthew, On Mon, 2021-10-11 at 16:47 -0700, Matthew Brost wrote:The hangcheck selftest blocks per engine resets by setting magic bits in the reset flags. This is incorrect for GuC submission because if the GuC fails to reset an engine we would like to do a full GT reset. Do no set these magic bits when using GuC submission. Side note this lockless algorithm with magic bits to block resets really should be ripped out.Lockless algorithm aside, from a quick look at the code in intel_reset.c it appears to me like the interface that falls back to a full GT reset is intel_gt_handle_error() whereas intel_engine_reset() is explicitly intended to not do that, so is there a discrepancy between GuC and non-GuC here?With GuC submission when an engine reset fails, we get an engine reset failure notification which triggers a full GT reset (intel_guc_engine_failure_process_msg in intel_guc_submission.c). That reset is blocking by setting these magic bits. Clearing the bits in this function doesn't seem to unblock that reset either, the driver tries to unload with a worker blocked, and results in the blow up. Something with this lockless algorithm could be wrong as clear of the bit should unlblock the reset but it is doesn't. We can look into that but in the meantime we need to fix this test to be able to fail gracefully and not crash CI.Yeah, for that lockless algorithm if needed, we might want to use a ww_mutex per engine or something,Do ww_mutex sleep? From what I can tell this lockless algorithm was added because even though resets are protected by mutex, there are some places in the IRQ context where we need to prevent resets from happening, hence the lockless protection + the mutex - what a mess. Long term this needs to rethought.but point was that AFAICT at least one of the tests that set those flags explicitly tested the functionality that no other engines than the intended one was reset when the intel_engine_reset() function was used, and then if GuC submission doesn't honor that, wouldn't a better approach be to make aNo. In execlists this test explictly calls the engine reset function and explictly prevents other parts of the i915 from calling the engine reset function - this is why it sets that bit. In GuC submission the i915 can't do engine resets, the GuC does. In this case the engine reset fails which triggers a G2H message which tells the i915 to do a GT reset. If this bit is set the worker blocks on this bit in the GT reset and the driver blows up on unload as this worker isn't complete (believe it has a PM ref or something).code comment around intel_engine_reset() to explain the differences andintel_engine_reset() return -ENODEV in GuC submission as the i915 isn't allowed to engine resets.disable that particular test for GuC?. Also wouldn't we for example we see a duplicated full GT reset with GuC if intel_engine_reset() fails as part of the intel_gt_handle_error() function?Yes, but the GT reset in this test is done after clearing the bits by the test. In the case of the GuC the GT reset is async operation done by a worker that receives the G2H message saying the engine reset failed.I guess we could live with the hangcheck test being disabled for guc submission until this is sorted out?Wouldn't help. See above this an async operation from G2H message. We can't disable the async G2H handler as without other G2H messages the world breaks. The only other possible fix would be add an IGT only variable that if set skips the handling this G2H only.
The current theory is that the timeout in GuC is not quite long enough for DG1. Given that the bspec does not specify any kind of timeout, it is only a best guess anyway! Once that has been tuned correctly, we should never hit this case again. Not ever, Not in a selftest, not in an end user use case, just not ever.
John.
I can assure with this patch, if the test fails, it fails gracefully which is what we want. Matt/ThomasMatt/ThomasSigned-off-by: Matthew Brost <matthew.brost@xxxxxxxxx> --- drivers/gpu/drm/i915/gt/selftest_hangcheck.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/selftest_hangcheck.c b/drivers/gpu/drm/i915/gt/selftest_hangcheck.c index 7e2d99dd012d..90a03c60c80c 100644 --- a/drivers/gpu/drm/i915/gt/selftest_hangcheck.c +++ b/drivers/gpu/drm/i915/gt/selftest_hangcheck.c @@ -734,7 +734,8 @@ static int __igt_reset_engine(struct intel_gt *gt, bool active) reset_engine_count = i915_reset_engine_count(global, engine); st_engine_heartbeat_disable(engine); - set_bit(I915_RESET_ENGINE + id, >->reset.flags); + if (!using_guc) + set_bit(I915_RESET_ENGINE + id, >-reset.flags);count = 0; do { struct i915_request *rq = NULL; @@ -824,7 +825,8 @@ static int __igt_reset_engine(struct intel_gt *gt, bool active) if (err) break; } while (time_before(jiffies, end_time)); - clear_bit(I915_RESET_ENGINE + id, >->reset.flags); + if (!using_guc) + clear_bit(I915_RESET_ENGINE + id, >-reset.flags);st_engine_heartbeat_enable(engine); pr_info("%s: Completed %lu %s resets\n", engine->name, count, active ? "active" : "idle"); @@ -1042,7 +1044,8 @@ static int __igt_reset_engines(struct intel_gt *gt, yield(); /* start all threads before we begin */ st_engine_heartbeat_disable_no_pm(engine); - set_bit(I915_RESET_ENGINE + id, >->reset.flags); + if (!using_guc) + set_bit(I915_RESET_ENGINE + id, >-reset.flags);do { struct i915_request *rq = NULL; struct intel_selftest_saved_policy saved; @@ -1165,7 +1168,8 @@ static int __igt_reset_engines(struct intel_gt *gt, if (err) break; } while (time_before(jiffies, end_time)); - clear_bit(I915_RESET_ENGINE + id, >->reset.flags); + if (!using_guc) + clear_bit(I915_RESET_ENGINE + id, >-reset.flags);st_engine_heartbeat_enable_no_pm(engine); pr_info("i915_reset_engine(%s:%s): %lu resets\n",
