On Mon, 18 Oct 2021, Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx> wrote:
> For the PHY enable/disable signalling to propagate
> between Dispaly and PHY, DDI clocks need to be running when
> enabling the PHY.
>
A bspec reference would be useful:
Bspec: NNN
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/icl_dsi.c | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 8c166f92f8bd..77cd01ecfa80 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1135,8 +1135,6 @@ static void
> gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state)
> {
> - struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> -
> /* step 4a: power up all lanes of the DDI used by DSI */
> gen11_dsi_power_up_lanes(encoder);
>
> @@ -1146,6 +1144,8 @@ gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
> /* step 4c: configure voltage swing and skew */
> gen11_dsi_voltage_swing_program_seq(encoder);
>
> + gen11_dsi_ungate_clocks(encoder);
> +
> /* enable DDI buffer */
> gen11_dsi_enable_ddi_buffer(encoder);
>
> @@ -1161,9 +1161,7 @@ gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
> /* Step (4h, 4i, 4j, 4k): Configure transcoder */
> gen11_dsi_configure_transcoder(encoder, crtc_state);
>
> - /* Step 4l: Gate DDI clocks */
> - if (DISPLAY_VER(dev_priv) == 11)
> - gen11_dsi_gate_clocks(encoder);
> + gen11_dsi_gate_clocks(encoder);
So how does this relate to
991d9557b0c4 ("drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping")
> }
>
> static void gen11_dsi_powerup_panel(struct intel_encoder *encoder)
--
Jani Nikula, Intel Open Source Graphics Center
