[PATCH v2] drm/i915: Remove memory frequency calculation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This memory frequency calculated is only used to check if it is zero,
what is not useful as it will never actually be zero.

Also the calculation is wrong, we should be checking other bit to
select the appropriate frequency multiplier while this code is stuck
with a fixed multiplier.

So here dropping it as whole.

v2:
- Also remove memory frequency calculation for gen9 LP platforms

Cc: Yakui Zhao <yakui.zhao@xxxxxxxxx>
Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
Fixes: f8112cb9574b ("drm/i915/gen11+: Only load DRAM information from pcode")
Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
---
 drivers/gpu/drm/i915/i915_reg.h   |  8 --------
 drivers/gpu/drm/i915/intel_dram.c | 30 ++----------------------------
 2 files changed, 2 insertions(+), 36 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a897f4abea0c3..8825f7ac477b6 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -11109,12 +11109,6 @@ enum skl_power_gate {
 #define  DC_STATE_DEBUG_MASK_CORES	(1 << 0)
 #define  DC_STATE_DEBUG_MASK_MEMORY_UP	(1 << 1)
 
-#define BXT_P_CR_MC_BIOS_REQ_0_0_0	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x7114)
-#define  BXT_REQ_DATA_MASK			0x3F
-#define  BXT_DRAM_CHANNEL_ACTIVE_SHIFT		12
-#define  BXT_DRAM_CHANNEL_ACTIVE_MASK		(0xF << 12)
-#define  BXT_MEMORY_FREQ_MULTIPLIER_HZ		133333333
-
 #define BXT_D_CR_DRP0_DUNIT8			0x1000
 #define BXT_D_CR_DRP0_DUNIT9			0x1200
 #define  BXT_D_CR_DRP0_DUNIT_START		8
@@ -11145,9 +11139,7 @@ enum skl_power_gate {
 #define  BXT_DRAM_TYPE_LPDDR4			(0x2 << 22)
 #define  BXT_DRAM_TYPE_DDR4			(0x4 << 22)
 
-#define SKL_MEMORY_FREQ_MULTIPLIER_HZ		266666666
 #define SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU	_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5E04)
-#define  SKL_REQ_DATA_MASK			(0xF << 0)
 #define  DG1_GEAR_TYPE				REG_BIT(16)
 
 #define SKL_MAD_INTER_CHANNEL_0_0_0_MCHBAR_MCMAIN _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5000)
diff --git a/drivers/gpu/drm/i915/intel_dram.c b/drivers/gpu/drm/i915/intel_dram.c
index 30a0cab5eff46..0adadfd9528aa 100644
--- a/drivers/gpu/drm/i915/intel_dram.c
+++ b/drivers/gpu/drm/i915/intel_dram.c
@@ -244,7 +244,6 @@ static int
 skl_get_dram_info(struct drm_i915_private *i915)
 {
 	struct dram_info *dram_info = &i915->dram_info;
-	u32 mem_freq_khz, val;
 	int ret;
 
 	dram_info->type = skl_get_dram_type(i915);
@@ -255,17 +254,6 @@ skl_get_dram_info(struct drm_i915_private *i915)
 	if (ret)
 		return ret;
 
-	val = intel_uncore_read(&i915->uncore,
-				SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU);
-	mem_freq_khz = DIV_ROUND_UP((val & SKL_REQ_DATA_MASK) *
-				    SKL_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
-
-	if (dram_info->num_channels * mem_freq_khz == 0) {
-		drm_info(&i915->drm,
-			 "Couldn't get system memory bandwidth\n");
-		return -EINVAL;
-	}
-
 	return 0;
 }
 
@@ -350,24 +338,10 @@ static void bxt_get_dimm_info(struct dram_dimm_info *dimm, u32 val)
 static int bxt_get_dram_info(struct drm_i915_private *i915)
 {
 	struct dram_info *dram_info = &i915->dram_info;
-	u32 dram_channels;
-	u32 mem_freq_khz, val;
-	u8 num_active_channels, valid_ranks = 0;
+	u32 val;
+	u8 valid_ranks = 0;
 	int i;
 
-	val = intel_uncore_read(&i915->uncore, BXT_P_CR_MC_BIOS_REQ_0_0_0);
-	mem_freq_khz = DIV_ROUND_UP((val & BXT_REQ_DATA_MASK) *
-				    BXT_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
-
-	dram_channels = val & BXT_DRAM_CHANNEL_ACTIVE_MASK;
-	num_active_channels = hweight32(dram_channels);
-
-	if (mem_freq_khz * num_active_channels == 0) {
-		drm_info(&i915->drm,
-			 "Couldn't get system memory bandwidth\n");
-		return -EINVAL;
-	}
-
 	/*
 	 * Now read each DUNIT8/9/10/11 to check the rank of each dimms.
 	 */
-- 
2.33.0




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux