On Tue, 2021-10-12 at 14:20 -0700, Matt Roper wrote:
> On Fri, Oct 08, 2021 at 01:58:55PM -0700, José Roberto de Souza wrote:
> > All display 9 and display 10 platforms has only 4 bits for the memory
> > frequency but display 11 platforms it changes to 8 bits.
> >
> > Display 9 platforms has another register in bits 7:4 that prevents us
> > to have a single mask.
> > Also adding new mask with the current name in CRWebViewer, not
> > sure why current mask is named like this.
> >
> > Fixes: f8112cb9574b ("drm/i915/gen11+: Only load DRAM information from pcode")
> > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 1 +
> > drivers/gpu/drm/i915/intel_dram.c | 7 +++++--
> > 2 files changed, 6 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index a897f4abea0c3..041f7dc9e0d94 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -11148,6 +11148,7 @@ enum skl_power_gate {
> > #define SKL_MEMORY_FREQ_MULTIPLIER_HZ 266666666
> > #define SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5E04)
> > #define SKL_REQ_DATA_MASK (0xF << 0)
> > +#define ICL_FREQ_MASK (0xFF << 0)
>
> We might as well take this opportunity to switch over to REG_GENMASK
> notation while we're here.
Will do.
>
> > #define DG1_GEAR_TYPE REG_BIT(16)
> >
> > #define SKL_MAD_INTER_CHANNEL_0_0_0_MCHBAR_MCMAIN _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5000)
> > diff --git a/drivers/gpu/drm/i915/intel_dram.c b/drivers/gpu/drm/i915/intel_dram.c
> > index 30a0cab5eff46..558589b1202d6 100644
> > --- a/drivers/gpu/drm/i915/intel_dram.c
> > +++ b/drivers/gpu/drm/i915/intel_dram.c
> > @@ -257,8 +257,11 @@ skl_get_dram_info(struct drm_i915_private *i915)
> >
> > val = intel_uncore_read(&i915->uncore,
> > SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU);
> > - mem_freq_khz = DIV_ROUND_UP((val & SKL_REQ_DATA_MASK) *
> > - SKL_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
> > + if (DISPLAY_VER(i915) == 11)
> > + val &= ICL_FREQ_MASK;
> > + else
> > + val &= SKL_REQ_DATA_MASK;
> > + mem_freq_khz = DIV_ROUND_UP(val * SKL_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
>
> I'm not sure SKL_MEMORY_FREQ_MULTIPLIER_HZ is correct anymore either.
> If I'm reading the register description correctly, it appears the value
> is now given in units of 133.33 MHz instead of the old 266.66.
Thought about that but as the calculated memory frequency here is not used for anything besides check if is not zero, I left as is.
>
>
> Matt
>
> >
> > if (dram_info->num_channels * mem_freq_khz == 0) {
> > drm_info(&i915->drm,
> > --
> > 2.33.0
> >
>
