[PATCH 6/7] drm/i915: make SDVO TV-out work for multifunction devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 30 Apr 2013, Daniel Vetter <daniel.vetter at ffwll.ch> wrote:
> We need to track this correctly. While at it shovel the boolean
> to track whether the sdvo is in tv mode or not into pipe_config.

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36997
> Tested-by: Pierre Assal <pierre.assal at verint.com>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36997
> Tested-by: cancan,feng <cancan.feng at intel.com>
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 8 +++-----
>  drivers/gpu/drm/i915/intel_drv.h     | 5 ++++-
>  drivers/gpu/drm/i915/intel_sdvo.c    | 8 ++------
>  3 files changed, 9 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 44bcfae..ef0d27b 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4546,7 +4546,7 @@ static void i9xx_update_pll(struct intel_crtc *crtc,
>  	if (INTEL_INFO(dev)->gen >= 4)
>  		dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
>  
> -	if (is_sdvo && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT))
> +	if (crtc->config.sdvo_tv_clock)
>  		dpll |= PLL_REF_INPUT_TVCLKINBC;
>  	else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
>  		 intel_panel_use_ssc(dev_priv) && num_connectors < 2)
> @@ -5590,7 +5590,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
>  	struct intel_encoder *intel_encoder;
>  	uint32_t dpll;
>  	int factor, num_connectors = 0;
> -	bool is_lvds = false, is_sdvo = false, is_tv = false;
> +	bool is_lvds = false, is_sdvo = false;
>  
>  	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
>  		switch (intel_encoder->type) {
> @@ -5600,8 +5600,6 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
>  		case INTEL_OUTPUT_SDVO:
>  		case INTEL_OUTPUT_HDMI:
>  			is_sdvo = true;
> -			if (intel_encoder->needs_tv_clock)
> -				is_tv = true;
>  			break;
>  		}
>  
> @@ -5615,7 +5613,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc,
>  		     dev_priv->lvds_ssc_freq == 100) ||
>  		    (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev)))
>  			factor = 25;
> -	} else if (is_sdvo && is_tv)
> +	} else if (intel_crtc->config.sdvo_tv_clock)
>  		factor = 20;
>  
>  	if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor))
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 766afcf..be196ff 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -120,7 +120,6 @@ struct intel_encoder {
>  	struct intel_crtc *new_crtc;
>  
>  	int type;
> -	bool needs_tv_clock;
>  	/*
>  	 * Intel hw has only one MUX where encoders could be clone, hence a
>  	 * simple flag is enough to compute the possible_clones mask.
> @@ -223,6 +222,10 @@ struct intel_crtc_config {
>  	/* Controls for the clock computation, to override various stages. */
>  	bool clock_set;
>  
> +	/* SDVO TV has a bunch of special case. To make multifunction encoders
> +	 * work correctly, we need to track this at runtime.*/
> +	bool sdvo_tv_clock;
> +
>  	/*
>  	 * crtc bandwidth limit, don't increase pipe bpp or clock if not really
>  	 * required. This is set in the 2nd loop of calling encoder's
> diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
> index f6bf9fc..3a1d710 100644
> --- a/drivers/gpu/drm/i915/intel_sdvo.c
> +++ b/drivers/gpu/drm/i915/intel_sdvo.c
> @@ -1092,6 +1092,7 @@ static bool intel_sdvo_compute_config(struct intel_encoder *encoder,
>  		(void) intel_sdvo_get_preferred_input_mode(intel_sdvo,
>  							   mode,
>  							   adjusted_mode);
> +		pipe_config->sdvo_tv_clock = true;
>  	} else if (intel_sdvo->is_lvds) {
>  		if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo,
>  							     intel_sdvo->sdvo_lvds_fixed_mode))
> @@ -1655,12 +1656,9 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)
>  	if (ret == connector_status_connected) {
>  		intel_sdvo->is_tv = false;
>  		intel_sdvo->is_lvds = false;
> -		intel_sdvo->base.needs_tv_clock = false;
>  
> -		if (response & SDVO_TV_MASK) {
> +		if (response & SDVO_TV_MASK)
>  			intel_sdvo->is_tv = true;
> -			intel_sdvo->base.needs_tv_clock = true;
> -		}
>  		if (response & SDVO_LVDS_MASK)
>  			intel_sdvo->is_lvds = intel_sdvo->sdvo_lvds_fixed_mode != NULL;
>  	}
> @@ -2357,7 +2355,6 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
>  	intel_sdvo_connector->output_flag = type;
>  
>  	intel_sdvo->is_tv = true;
> -	intel_sdvo->base.needs_tv_clock = true;
>  
>  	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
>  
> @@ -2445,7 +2442,6 @@ static bool
>  intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags)
>  {
>  	intel_sdvo->is_tv = false;
> -	intel_sdvo->base.needs_tv_clock = false;
>  	intel_sdvo->is_lvds = false;
>  
>  	/* SDVO requires XXX1 function may not exist unless it has XXX0 function.*/
> -- 
> 1.7.11.7
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx


[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux