On Wed, Sep 22, 2021 at 05:05:12PM +0300, Ville Syrjälä wrote:
> On Fri, Sep 17, 2021 at 06:34:22PM +0300, Lisovskiy, Stanislav wrote:
> > On Fri, May 14, 2021 at 03:57:42PM +0300, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > >
> > > If HPLL watermarks are already enabled, let's not mark them as
> > > disabled by forgetting to bump 'level' before we call
> > > g4x_raw_plane_wm_set().
> > >
> > > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/i915/intel_pm.c | 7 +++++--
> > > 1 file changed, 5 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> > > index 661bc6fdf38c..990ee5a590d3 100644
> > > --- a/drivers/gpu/drm/i915/intel_pm.c
> > > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > > @@ -6468,7 +6468,8 @@ void g4x_wm_get_hw_state(struct drm_i915_private *dev_priv)
> > > for_each_plane_id_on_crtc(crtc, plane_id)
> > > raw->plane[plane_id] = active->wm.plane[plane_id];
> > >
> > > - if (++level > max_level)
> > > + level = G4X_WM_LEVEL_SR;
> > > + if (level > max_level)
> >
> > Do I understand correctly that its basically identical to what
> > was before, so this is done here just for it to look more explicit?
> >
> > I.e we had for example max_level G4X_WM_LEVEL_SR and level G4X_WM_LEVEL_NORMAL
> > , after ++level it will anyway become G4X_WM_LEVEL_SR and same for next one.
> >
> >
> > > goto out;
> > >
> > > raw = &crtc_state->wm.g4x.raw[level];
> > > @@ -6477,7 +6478,8 @@ void g4x_wm_get_hw_state(struct drm_i915_private *dev_priv)
> > > raw->plane[PLANE_SPRITE0] = 0;
> > > raw->fbc = active->sr.fbc;
> > >
> > > - if (++level > max_level)
> > > + level = G4X_WM_LEVEL_HPLL;
> > > + if (level > max_level)
> > > goto out;
> > >
> > > raw = &crtc_state->wm.g4x.raw[level];
> > > @@ -6486,6 +6488,7 @@ void g4x_wm_get_hw_state(struct drm_i915_private *dev_priv)
> > > raw->plane[PLANE_SPRITE0] = 0;
> > > raw->fbc = active->hpll.fbc;
> > >
> > > + level++;
> >
> > Hi Ville,
> >
> > So if we reached here, it means level = G4X_WM_LEVEL_HPLL, which is
> > the max wm level defined, why are we then incrementing it even more?
> >
> > the g4x_raw_plane_wm_set will be using that value as a level:
> >
> > for (; level < intel_wm_num_levels(dev_priv); level++) {
> > struct g4x_pipe_wm *raw = &crtc_state->wm.g4x.raw[level];
> >
> > dirty |= raw->plane[plane_id] != value;
> > raw->plane[plane_id] = value;
> > }
> >
> > however level then will be equal to NUM_G4X_WM_LEVELS, which is actually
> > an illegal value, or is that an expected behaviour?
> >
> > Just trying to understand, whats happening here, before stamping an r-b :)
> >
> > Stan
> >
> >
> > > out:
> > > for_each_plane_id_on_crtc(crtc, plane_id)
> > > g4x_raw_plane_wm_set(crtc_state, level,
>
> Right, so the code is basically this:
>
> level = G4X_WM_LEVEL_SR;
> if (level > max_level)
> goto out;
> level = G4X_WM_LEVEL_HPLL;
> if (level > max_level)
> goto out;
> level++ /* ie. level=NUM_G4X_WM_LEVELS */
> out:
> invalidate_raw_watermarks_starting_from_level(level);
>
> So if we take the first goto we want to invalidate all
> watermarks starting from SR, second goto wants to invalidate
> all watermarks starting from HPLL, and if we didn't take either
> goto we don't want to invalidate any watermarks because we deemed
> everything up to and including HPLL is ok. So we can't just
> leave level==G4X_WM_LEVEL_HPLL or else the code would still invalidate
> the HPLL watermarks. Instead we level++ so that the invalidate call
> becomes a nop.
>
> The other option I suppose would be to skip the invalidation stuff
> if we didn't take either of the gotos, but I'm thinking that would make
> the code more messy.
Ah ok, thought its setting wm levels, but if its actually invalidating,
makes sense. Probably that is why it uses USHRT_MAX as a value.
Thanks for the clarification.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
>
> --
> Ville Syrjälä
> Intel
