Re: [PATCH V4] drm/i915/gen11: Disable cursor clock gating in HDR mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ville,

Can you please help with reviewing below patch?

Thanks,
Tejas
> -----Original Message-----
> From: Surendrakumar Upadhyay, TejaskumarX
> Sent: 07 September 2021 21:42
> To: 'Ville Syrjälä' <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: 'intel-gfx@xxxxxxxxxxxxxxxxxxxxx' <intel-gfx@xxxxxxxxxxxxxxxxxxxxx>; Souza,
> Jose <jose.souza@xxxxxxxxx>; Pandey, Hariom <hariom.pandey@xxxxxxxxx>
> Subject: RE:  [PATCH V4] drm/i915/gen11: Disable cursor clock
> gating in HDR mode
> 
> Hi Ville,
> 
> I have posted single patch for HDR mode here
> https://patchwork.freedesktop.org/series/94428/#rev1 . Please review and
> ack. I will post " drm/i915/gen11: Disable cursor clock gating in HDR mode "
> on top of that patch.
> 
> Thanks,
> Tejas
> 
> > -----Original Message-----
> > From: Surendrakumar Upadhyay, TejaskumarX
> > Sent: 06 September 2021 11:41
> > To: 'Ville Syrjälä' <ville.syrjala@xxxxxxxxxxxxxxx>
> > Cc: 'intel-gfx@xxxxxxxxxxxxxxxxxxxxx'
> > <intel-gfx@xxxxxxxxxxxxxxxxxxxxx>; Souza, Jose <jose.souza@xxxxxxxxx>;
> > Pandey, Hariom <hariom.pandey@xxxxxxxxx>
> > Subject: RE:  [PATCH V4] drm/i915/gen11: Disable cursor
> > clock gating in HDR mode
> >
> > Hi Ville/Jose,
> >
> > I hope you both discussed as in next version I will incorporate all
> > changes as per Ville's final suggestion. Please let me know if you guys think
> otherwise.
> >
> > Thanks,
> > Tejas
> >
> > > -----Original Message-----
> > > From: Surendrakumar Upadhyay, TejaskumarX
> > > Sent: 02 September 2021 18:37
> > > To: 'Ville Syrjälä' <ville.syrjala@xxxxxxxxxxxxxxx>
> > > Cc: 'intel-gfx@xxxxxxxxxxxxxxxxxxxxx'
> > > <intel-gfx@xxxxxxxxxxxxxxxxxxxxx>; Souza, Jose
> > > <jose.souza@xxxxxxxxx>; Pandey, Hariom <hariom.pandey@xxxxxxxxx>
> > > Subject: RE:  [PATCH V4] drm/i915/gen11: Disable cursor
> > > clock gating in HDR mode
> > >
> > > + Hariom
> > >
> > > > -----Original Message-----
> > > > From: Surendrakumar Upadhyay, TejaskumarX
> > > > Sent: 02 September 2021 18:34
> > > > To: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; Souza, Jose
> > > > <jose.souza@xxxxxxxxx>
> > > > Subject: RE:  [PATCH V4] drm/i915/gen11: Disable cursor
> > > > clock gating in HDR mode
> > > >
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > > Sent: 02 September 2021 18:29
> > > > > To: Surendrakumar Upadhyay, TejaskumarX
> > > > > <tejaskumarx.surendrakumar.upadhyay@xxxxxxxxx>
> > > > > Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > > > Subject: Re:  [PATCH V4] drm/i915/gen11: Disable
> > > > > cursor clock gating in HDR mode
> > > > >
> > > > > On Thu, Sep 02, 2021 at 11:07:06AM +0000, Surendrakumar
> > > > > Upadhyay, TejaskumarX wrote:
> > > > > >
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > > > > Sent: 01 September 2021 19:19
> > > > > > > To: Surendrakumar Upadhyay, TejaskumarX
> > > > > > > <tejaskumarx.surendrakumar.upadhyay@xxxxxxxxx>
> > > > > > > Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > > > > > Subject: Re:  [PATCH V4] drm/i915/gen11: Disable
> > > > > > > cursor clock gating in HDR mode
> > > > > > >
> > > > > > > On Tue, Jun 22, 2021 at 03:04:24PM +0530, Tejas Upadhyay wrote:
> > > > > > > > Display underrun in HDR mode when cursor is enabled.
> > > > > > > > RTL fix will be implemented CLKGATE_DIS_PSL_A bit 28-46520h.
> > > > > > > > As per W/A 1604331009, Disable cursor clock gating in HDR
> mode.
> > > > > > > >
> > > > > > > > Bspec : 33451
> > > > > > > >
> > > > > > > > Changes since V3:
> > > > > > > > 	- Disable WA when not in HDR mode or cursor plane not
> > > active - Ville
> > > > > > > > 	- Extract required args from crtc_state - Ville
> > > > > > > > 	- Create HDR mode API using bdw_set_pipemisc ref - Ville
> > > > > > > > 	- Tested with HDR video as well full setmode, WA applies
> > > > > > > > and
> > > > > > > disables
> > > > > > > > Changes since V2:
> > > > > > > >         - Made it general gen11 WA
> > > > > > > >         - Removed WA needed check
> > > > > > > >         - Added cursor plane active check
> > > > > > > >         - Once WA enable, software will not disable Changes since
> V1:
> > > > > > > >         - Modified way CLKGATE_DIS_PSL bit 28 was modified
> > > > > > > >
> > > > > > > > Cc: Souza Jose <jose.souza@xxxxxxxxx>
> > > > > > > > Signed-off-by: Tejas Upadhyay
> > > > > > > > <tejaskumarx.surendrakumar.upadhyay@xxxxxxxxx>
> > > > > > > > ---
> > > > > > > >  drivers/gpu/drm/i915/display/intel_display.c | 27
> > > > > ++++++++++++++++++++
> > > > > > > >  drivers/gpu/drm/i915/i915_reg.h              |  5 ++++
> > > > > > > >  2 files changed, 32 insertions(+)
> > > > > > > >
> > > > > > > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > > index 6be1b31af07b..e1ea03b918df 100644
> > > > > > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > > > > > @@ -358,6 +358,13 @@ static void intel_update_czclk(struct
> > > > > > > drm_i915_private *dev_priv)
> > > > > > > >  		dev_priv->czclk_freq);
> > > > > > > >  }
> > > > > > > >
> > > > > > > > +static bool
> > > > > > > > +is_hdr_mode(const struct intel_crtc_state *crtc_state) {
> > > > > > > > +	return (crtc_state->active_planes & ~(icl_hdr_plane_mask() |
> > > > > > > > +		BIT(PLANE_CURSOR))) == 0; }
> > > > > > >
> > > > > > > Please use this in bdw_set_pipemisc() as well. This could be
> > > > > > > a separate prep patch actually.
> > > > > > >
> > > > > > > > +
> > > > > > > >  /* WA Display #0827: Gen9:all */  static void
> > > > > > > > skl_wa_827(struct drm_i915_private *dev_priv, enum pipe
> > > > > > > > pipe, bool
> > > > > > > > enable) @@ -383,6 +390,23 @@ icl_wa_scalerclkgating(struct
> > > > > > > drm_i915_private *dev_priv, enum pipe pipe,
> > > > > > > >  		               intel_de_read(dev_priv,
> > > > > > > > CLKGATE_DIS_PSL(pipe)) & ~DPFR_GATING_DIS);  }
> > > > > > > >
> > > > > > > > +/* Wa_1604331009:icl,jsl,ehl */
> > > > > > > > +	static void
> > > > > > > > +icl_wa_cursorclkgating(const struct intel_crtc_state *crtc_state)
> {
> > > > > > > > +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > > > > > > +	struct drm_i915_private *dev_priv =
> > > > > > > > +to_i915(crtc->base.dev);
> > > > > > > > +
> > > > > > > > +	if (is_hdr_mode(crtc_state) &&
> > > > > > > > +	    crtc_state->active_planes & BIT(PLANE_CURSOR) &&
> > > > > > > > +	    IS_GEN(dev_priv, 11))
> > > > > > > > +		intel_de_rmw(dev_priv, CLKGATE_DIS_PSL(crtc-
> > > > >pipe),
> > > > > > > > +			     CURSOR_GATING_DIS,
> > > > CURSOR_GATING_DIS);
> > > > > > > > +	else
> > > > > > > > +		intel_de_rmw(dev_priv, CLKGATE_DIS_PSL(crtc-
> > > > >pipe),
> > > > > > > > +			     CURSOR_GATING_DIS, 0); }
> > > > > > > > +
> > > > > > > >  static bool
> > > > > > > >  is_trans_port_sync_slave(const struct intel_crtc_state
> > > > > > > > *crtc_state) { @@ -2939,6 +2963,9 @@ static void
> > > > > > > > intel_pre_plane_update(struct intel_atomic_state *state,
> > > > > > > >  	    needs_scalerclk_wa(new_crtc_state))
> > > > > > > >  		icl_wa_scalerclkgating(dev_priv, pipe, true);
> > > > > > > >
> > > > > > > > +	/* Wa_1604331009:icl,jsl,ehl */
> > > > > > > > +	icl_wa_cursorclkgating(new_crtc_state);
> > > > > > >
> > > > > > > This looks a bit wrong. We shouldn't turn the clock gating
> > > > > > > back on until after HDR mode has been disabled.
> > > > > > >
> > > > > > > So please model this after skl_wa_827() and
> > > > > > > icl_wa_scalerclkgating() so that
> > > > > > > a) the ordering is correct, and b) the code between all
> > > > > > > three w/as looks consistent.
> > > > > >
> > > > > > I did not get what you are suggesting here. Can you please put
> psudo?
> > > > > > Currently as far as I see icl_wa_cursorclkgating is already
> > > > > > modelled after
> > > > > skl_wa_827() and icl_wa_scalerclkgating(). Are referring same Or
> > > > > something else?
> > > > >
> > > > > It should look something like:
> > > > >
> > > > > intel_pre_plane_update()
> > > > > {
> > > > > 	if (!needs_cursorclk_wa(old_crtc_state) &&
> > > > > 	    needs_cursorclk_wa(new_crtc_state))
> > > > > 		icl_wa_cursorclkgating(..., true); }
> > > > >
> > > > > intel_post_plane_update()
> > > > > {
> > > > > 	if (needs_cursorclk_wa(old_crtc_state) &&
> > > > > 	    !needs_cursorclk_wa(new_crtc_state))
> > > > > 		icl_wa_cursorclkgating(..., false); }
> > > > >
> > > >
> > > > Tejas : In the previous version it was done this way only. But
> > > > after review comments from Jose I had to change it. See "Changes since
> V2"
> > > > section. Also you can check in previous versions of patch.
> > > >
> > > > >
> > > > > --
> > > > > Ville Syrjälä
> > > > > Intel




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux