On Thu, Sep 09, 2021 at 03:52:04PM +0300, Jani Nikula wrote:
> There's a new register pair for 128b/132b mode where you need to set the
> pixel clock in Hz.
>
> v2: Fix UHBR rate check, use intel_dp_is_uhbr() helper
>
> Bspec: 54128
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_dp_mst.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index d104441344c0..97af19fd9780 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -550,6 +550,17 @@ static void intel_mst_enable_dp(struct intel_atomic_state *state,
>
> clear_act_sent(encoder, pipe_config);
>
> + if (intel_dp_is_uhbr(pipe_config)) {
> + const struct drm_display_mode *adjusted_mode =
> + &pipe_config->hw.adjusted_mode;
> + u64 crtc_clock_hz = KHz(adjusted_mode->crtc_clock);
> +
> + intel_de_write(dev_priv, TRANS_DP2_VFREQHIGH(pipe_config->cpu_transcoder),
> + TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz >> 24));
> + intel_de_write(dev_priv, TRANS_DP2_VFREQLOW(pipe_config->cpu_transcoder),
> + TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz & 0xffffff));
> + }
> +
> intel_ddi_enable_transcoder_func(encoder, pipe_config);
>
> intel_de_rmw(dev_priv, TRANS_DDI_FUNC_CTL(trans), 0,
> --
> 2.30.2
--
Ville Syrjälä
Intel
