On Thu, Sep 09, 2021 at 05:39:26PM +0300, Ville Syrjälä wrote:
> On Thu, Sep 09, 2021 at 07:29:33AM -0700, Matt Roper wrote:
> > On Thu, Sep 09, 2021 at 04:58:50PM +0300, Ville Syrjälä wrote:
> > > On Tue, Sep 07, 2021 at 11:19:29AM -0700, Matt Roper wrote:
> > > > On Tue, Sep 07, 2021 at 08:41:06PM +0300, Ville Syrjälä wrote:
> > > > > On Tue, Sep 07, 2021 at 10:27:28AM -0700, Matt Roper wrote:
> > > > > > On Tue, Sep 07, 2021 at 10:46:39PM +0530, Ayaz A Siddiqui wrote:
> > > > > > > MOCS table of TGL/RKL has MOCS[1] set to L3_UC.
> > > > > > > While for other gen12 devices we need to set MOCS[1] as L3_WB,
> > > > > > > So adding a new MOCS table for other gen 12 devices eg. ADL.
> > > > > > >
> > > > > > > Fixes: cfbe5291a189 ("drm/i915/gt: Initialize unused MOCS entries with device specific values")
> > > > > > > Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
> > > > > > > Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@xxxxxxxxx>
> > > > > >
> > > > > > Yep, we overlooked that the TGL table still had an explicit entry for
> > > > > > I915_MOCS_PTE and wasn't just using an implicit 'unused_entries' lookup
> > > > > > for MOCS[1]. The new table is the same as the TGL table, just with
> > > > > > I915_MOCS_PTE (1) removed.
> > > > >
> > > > > And just how are people planning on handling display cacheability
> > > > > control without a PTE MOCS entry? Is Mesa/etc. already making all
> > > > > external bos uncached on these platforms just in case we might
> > > > > scan out said bo?
> > > >
> > > > MOCS entry 1 has never been considered a valid MOCS table entry on gen12
> > > > platforms (despite the old #define, it's not actually related to PTE,
> > > > display, etc. anymore).
> > >
> > > So can someone finally explain to me how we're supposed to cache
> > > anything that might become a scanout buffer later (eg. window system
> > > buffers)? Or are we just making everything like that UC now, and is
> > > everyone happy with that? Is userspace actually following that?
> >
> > Table entry #1 has never had anything to do with scanout on gen12+. I
> > would assume that UMDs are either using the display entry in the MOCS
> > table (which is 61 on gen12+) or some other UC entry.
>
> If 61 is meant to to be the new PTE entry wy hasn't it been defines as
> such in the code? And I know for a fact that userspace (Mesa) is not
There is no "PTE" entry anymore. But 61 is already documented as
"displayable" in both the spec and the code:
/* HW Special Case (Displayable) */
MOCS_ENTRY(61,
> using entry 61. I think there is a massive communication gap here
> where everyone just seems to assume the other side is doing something.
>
> Could someone actually come up with a clear abi definition for this
> and get all the stakeholders to sign off on it?
The agreement between the i915 team, various userspace teams, Windows
driver team, hardware architects, software architects, and bspec writers
was just completed; that's what triggered the kernel updates here (and
I'm guessing is triggering similar work on the UMD side). It's also why
we held off on removing the force_probe flag on ADL until now since we
couldn't consider enablement of the platform complete until the
agreement and definitions here was finalized.
Matt
>
> --
> Ville Syrjälä
> Intel
--
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
