According to chapter "Sending Commands to the Panel" in bspec #29738
and #49188. If driver try to send DCS long pakcet, we have to program
TX payload register at first. And configure TX header HW register later.
DSC long packet would not be sent properly if we don't follow this
sequence.
Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
Cc: Cooper Chiou <cooper.chiou@xxxxxxxxx>
Cc: William Tseng <william.tseng@xxxxxxxxx>
Signed-off-by: Lee Shawn C <shawn.c.lee@xxxxxxxxx>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/icl_dsi.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 44289003b709..060bc8fb0d30 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1831,11 +1831,6 @@ static ssize_t gen11_dsi_host_transfer(struct mipi_dsi_host *host,
if (msg->flags & MIPI_DSI_MSG_USE_LPM)
enable_lpdt = true;
- /* send packet header */
- ret = dsi_send_pkt_hdr(intel_dsi_host, dsi_pkt, enable_lpdt);
- if (ret < 0)
- return ret;
-
/* only long packet contains payload */
if (mipi_dsi_packet_format_is_long(msg->type)) {
ret = dsi_send_pkt_payld(intel_dsi_host, dsi_pkt);
@@ -1843,6 +1838,11 @@ static ssize_t gen11_dsi_host_transfer(struct mipi_dsi_host *host,
return ret;
}
+ /* send packet header */
+ ret = dsi_send_pkt_hdr(intel_dsi_host, dsi_pkt, enable_lpdt);
+ if (ret < 0)
+ return ret;
+
//TODO: add payload receive code if needed
ret = sizeof(dsi_pkt.header) + dsi_pkt.payload_length;
--
2.17.1
