On Wed, Aug 25, 2021 at 05:23:35PM +0000, Souza, Jose wrote:
> On Wed, 2021-08-25 at 11:55 -0400, Rodrigo Vivi wrote:
> > On Tue, Aug 24, 2021 at 05:58:34PM -0700, José Roberto de Souza wrote:
> > > intel_dp.c is a 5k lines monster, so moving DRRS out of it to reduce
> > > some lines from it.
> > >
> > > Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> > > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> > > ---
> > > Documentation/gpu/i915.rst | 14 +-
> > > drivers/gpu/drm/i915/Makefile | 1 +
> > > drivers/gpu/drm/i915/display/intel_ddi.c | 1 +
> > > .../drm/i915/display/intel_display_debugfs.c | 1 +
> > > drivers/gpu/drm/i915/display/intel_dp.c | 467 +----------------
> > > drivers/gpu/drm/i915/display/intel_dp.h | 11 -
> > > drivers/gpu/drm/i915/display/intel_drrs.c | 477 ++++++++++++++++++
> > > drivers/gpu/drm/i915/display/intel_drrs.h | 32 ++
> > > .../gpu/drm/i915/display/intel_frontbuffer.c | 1 +
> > > 9 files changed, 521 insertions(+), 484 deletions(-)
> > > create mode 100644 drivers/gpu/drm/i915/display/intel_drrs.c
> > > create mode 100644 drivers/gpu/drm/i915/display/intel_drrs.h
> > >
> > > diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst
> > > index 204ebdaadb45a..03021dfa0dd81 100644
> > > --- a/Documentation/gpu/i915.rst
> > > +++ b/Documentation/gpu/i915.rst
> > > @@ -183,25 +183,25 @@ Frame Buffer Compression (FBC)
> > > Display Refresh Rate Switching (DRRS)
> > > -------------------------------------
> > >
> > > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > > :doc: Display Refresh Rate Switching (DRRS)
> > >
> > > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > > :functions: intel_dp_set_drrs_state
> > >
> > > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > > :functions: intel_edp_drrs_enable
> > >
> > > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > > :functions: intel_edp_drrs_disable
> > >
> > > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > > :functions: intel_edp_drrs_invalidate
> > >
> > > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > > :functions: intel_edp_drrs_flush
> > >
> > > -.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c
> > > +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c
> > > :functions: intel_dp_drrs_init
> > >
> > > DPIO
> > > diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> > > index fd997dfa5e32c..ee502a2354c44 100644
> > > --- a/drivers/gpu/drm/i915/Makefile
> > > +++ b/drivers/gpu/drm/i915/Makefile
> > > @@ -213,6 +213,7 @@ i915-y += \
> > > display/intel_dpll.o \
> > > display/intel_dpll_mgr.o \
> > > display/intel_dpt.o \
> > > + display/intel_drrs.o \
> > > display/intel_dsb.o \
> > > display/intel_fb.o \
> > > display/intel_fbc.o \
> > > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > index 1ef7a65feb660..828df570a4809 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > > @@ -40,6 +40,7 @@
> > > #include "intel_dp_link_training.h"
> > > #include "intel_dp_mst.h"
> > > #include "intel_dpio_phy.h"
> > > +#include "intel_drrs.h"
> > > #include "intel_dsi.h"
> > > #include "intel_fdi.h"
> > > #include "intel_fifo_underrun.h"
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > index 8fdacb252bb19..b136a0fc0963b 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > @@ -13,6 +13,7 @@
> > > #include "intel_display_types.h"
> > > #include "intel_dmc.h"
> > > #include "intel_dp.h"
> > > +#include "intel_drrs.h"
> > > #include "intel_fbc.h"
> > > #include "intel_hdcp.h"
> > > #include "intel_hdmi.h"
> > > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > > index fd4f7e82e4205..965b888e0e771 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > > @@ -55,6 +55,7 @@
> > > #include "intel_dp_mst.h"
> > > #include "intel_dpio_phy.h"
> > > #include "intel_dpll.h"
> > > +#include "intel_drrs.h"
> > > #include "intel_fifo_underrun.h"
> > > #include "intel_hdcp.h"
> > > #include "intel_hdmi.h"
> > > @@ -1675,46 +1676,6 @@ intel_dp_compute_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp,
> > > intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA);
> > > }
> > >
> > > -static void
> > > -intel_dp_drrs_compute_config(struct intel_dp *intel_dp,
> > > - struct intel_crtc_state *pipe_config,
> > > - int output_bpp, bool constant_n)
> > > -{
> > > - struct intel_connector *intel_connector = intel_dp->attached_connector;
> > > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > - int pixel_clock;
> > > -
> > > - if (pipe_config->vrr.enable)
> > > - return;
> > > -
> > > - /*
> > > - * DRRS and PSR can't be enable together, so giving preference to PSR
> > > - * as it allows more power-savings by complete shutting down display,
> > > - * so to guarantee this, intel_dp_drrs_compute_config() must be called
> > > - * after intel_psr_compute_config().
> > > - */
> > > - if (pipe_config->has_psr)
> > > - return;
> > > -
> > > - if (!intel_connector->panel.downclock_mode ||
> > > - dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
> > > - return;
> > > -
> > > - pipe_config->has_drrs = true;
> > > -
> > > - pixel_clock = intel_connector->panel.downclock_mode->clock;
> > > - if (pipe_config->splitter.enable)
> > > - pixel_clock /= pipe_config->splitter.link_count;
> > > -
> > > - intel_link_compute_m_n(output_bpp, pipe_config->lane_count, pixel_clock,
> > > - pipe_config->port_clock, &pipe_config->dp_m2_n2,
> > > - constant_n, pipe_config->fec_enable);
> > > -
> > > - /* FIXME: abstract this better */
> > > - if (pipe_config->splitter.enable)
> > > - pipe_config->dp_m2_n2.gmch_m *= pipe_config->splitter.link_count;
> > > -}
> > > -
> > > int
> > > intel_dp_compute_config(struct intel_encoder *encoder,
> > > struct intel_crtc_state *pipe_config,
> > > @@ -4785,432 +4746,6 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
> > > drm_connector_attach_vrr_capable_property(connector);
> > > }
> > >
> > > -/**
> > > - * intel_dp_set_drrs_state - program registers for RR switch to take effect
> > > - * @dev_priv: i915 device
> > > - * @crtc_state: a pointer to the active intel_crtc_state
> > > - * @refresh_rate: RR to be programmed
> >
> > I know it was already here...
> >
> > > - *
> > > - * This function gets called when refresh rate (RR) has to be changed from
> > > - * one frequency to another. Switches can be between high and low RR
> > > - * supported by the panel or to any other RR based on media playback (in
> > > - * this case, RR value needs to be passed from user space).
> > > - *
> > > - * The caller of this function needs to take a lock on dev_priv->drrs.
> > > - */
> > > -static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv,
> > > - const struct intel_crtc_state *crtc_state,
> > > - int refresh_rate)
> > > -{
> > > - struct intel_dp *intel_dp = dev_priv->drrs.dp;
> > > - struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > - enum drrs_refresh_rate_type index = DRRS_HIGH_RR;
> > > -
> > > - if (refresh_rate <= 0) {
> > > - drm_dbg_kms(&dev_priv->drm,
> > > - "Refresh rate should be positive non-zero.\n");
> > > - return;
> > > - }
> > > -
> > > - if (intel_dp == NULL) {
> > > - drm_dbg_kms(&dev_priv->drm, "DRRS not supported.\n");
> > > - return;
> > > - }
> > > -
> > > - if (!crtc) {
> > > - drm_dbg_kms(&dev_priv->drm,
> > > - "DRRS: intel_crtc not initialized\n");
> > > - return;
> > > - }
> > > -
> > > - if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) {
> > > - drm_dbg_kms(&dev_priv->drm, "Only Seamless DRRS supported.\n");
> > > - return;
> > > - }
> > > -
> > > - if (drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode) ==
> > > - refresh_rate)
> > > - index = DRRS_LOW_RR;
> > > -
> > > - if (index == dev_priv->drrs.refresh_rate_type) {
> > > - drm_dbg_kms(&dev_priv->drm,
> > > - "DRRS requested for previously set RR...ignoring\n");
> > > - return;
> > > - }
> > > -
> > > - if (!crtc_state->hw.active) {
> > > - drm_dbg_kms(&dev_priv->drm,
> > > - "eDP encoder disabled. CRTC not Active\n");
> > > - return;
> > > - }
> > > -
> > > - if (DISPLAY_VER(dev_priv) >= 8 && !IS_CHERRYVIEW(dev_priv)) {
> > > - switch (index) {
> > > - case DRRS_HIGH_RR:
> > > - intel_dp_set_m_n(crtc_state, M1_N1);
> > > - break;
> > > - case DRRS_LOW_RR:
> > > - intel_dp_set_m_n(crtc_state, M2_N2);
> > > - break;
> > > - case DRRS_MAX_RR:
> > > - default:
> > > - drm_err(&dev_priv->drm,
> > > - "Unsupported refreshrate type\n");
> > > - }
> > > - } else if (DISPLAY_VER(dev_priv) > 6) {
> > > - i915_reg_t reg = PIPECONF(crtc_state->cpu_transcoder);
> > > - u32 val;
> > > -
> > > - val = intel_de_read(dev_priv, reg);
> > > - if (index > DRRS_HIGH_RR) {
> > > - if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > > - val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV;
> > > - else
> > > - val |= PIPECONF_EDP_RR_MODE_SWITCH;
> > > - } else {
> > > - if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > > - val &= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV;
> > > - else
> > > - val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
> > > - }
> > > - intel_de_write(dev_priv, reg, val);
> > > - }
> > > -
> > > - dev_priv->drrs.refresh_rate_type = index;
> > > -
> > > - drm_dbg_kms(&dev_priv->drm, "eDP Refresh Rate set to : %dHz\n",
> > > - refresh_rate);
> > > -}
> > > -
> > > -static void
> > > -intel_edp_drrs_enable_locked(struct intel_dp *intel_dp)
> > > -{
> > > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > -
> > > - dev_priv->drrs.busy_frontbuffer_bits = 0;
> > > - dev_priv->drrs.dp = intel_dp;
> > > -}
> > > -
> > > -/**
> > > - * intel_edp_drrs_enable - init drrs struct if supported
> > > - * @intel_dp: DP struct
> > > - * @crtc_state: A pointer to the active crtc state.
> > > - *
> > > - * Initializes frontbuffer_bits and drrs.dp
> > > - */
> > > -void intel_edp_drrs_enable(struct intel_dp *intel_dp,
> > > - const struct intel_crtc_state *crtc_state)
> > > -{
> > > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > -
> > > - if (!crtc_state->has_drrs)
> > > - return;
> > > -
> > > - drm_dbg_kms(&dev_priv->drm, "Enabling DRRS\n");
> > > -
> > > - mutex_lock(&dev_priv->drrs.mutex);
> > > -
> > > - if (dev_priv->drrs.dp) {
> > > - drm_warn(&dev_priv->drm, "DRRS already enabled\n");
> > > - goto unlock;
> > > - }
> > > -
> > > - intel_edp_drrs_enable_locked(intel_dp);
> > > -
> > > -unlock:
> > > - mutex_unlock(&dev_priv->drrs.mutex);
> > > -}
> > > -
> > > -static void
> > > -intel_edp_drrs_disable_locked(struct intel_dp *intel_dp,
> > > - const struct intel_crtc_state *crtc_state)
> > > -{
> > > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > -
> > > - if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) {
> > > - int refresh;
> > > -
> > > - refresh = drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode);
> > > - intel_dp_set_drrs_state(dev_priv, crtc_state, refresh);
> > > - }
> > > -
> > > - dev_priv->drrs.dp = NULL;
> > > -}
> > > -
> > > -/**
> > > - * intel_edp_drrs_disable - Disable DRRS
> > > - * @intel_dp: DP struct
> > > - * @old_crtc_state: Pointer to old crtc_state.
> > > - *
> > > - */
> > > -void intel_edp_drrs_disable(struct intel_dp *intel_dp,
> > > - const struct intel_crtc_state *old_crtc_state)
> > > -{
> > > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > -
> > > - if (!old_crtc_state->has_drrs)
> > > - return;
> > > -
> > > - mutex_lock(&dev_priv->drrs.mutex);
> > > - if (!dev_priv->drrs.dp) {
> > > - mutex_unlock(&dev_priv->drrs.mutex);
> > > - return;
> > > - }
> > > -
> > > - intel_edp_drrs_disable_locked(intel_dp, old_crtc_state);
> > > - mutex_unlock(&dev_priv->drrs.mutex);
> > > -
> > > - cancel_delayed_work_sync(&dev_priv->drrs.work);
> > > -}
> > > -
> > > -/**
> > > - * intel_edp_drrs_update - Update DRRS state
> > > - * @intel_dp: Intel DP
> > > - * @crtc_state: new CRTC state
> > > - *
> > > - * This function will update DRRS states, disabling or enabling DRRS when
> > > - * executing fastsets. For full modeset, intel_edp_drrs_disable() and
> > > - * intel_edp_drrs_enable() should be called instead.
> > > - */
> > > -void
> > > -intel_edp_drrs_update(struct intel_dp *intel_dp,
> > > - const struct intel_crtc_state *crtc_state)
> > > -{
> > > - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > -
> > > - if (dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
> > > - return;
> > > -
> > > - mutex_lock(&dev_priv->drrs.mutex);
> > > -
> > > - /* New state matches current one? */
> > > - if (crtc_state->has_drrs == !!dev_priv->drrs.dp)
> > > - goto unlock;
> > > -
> > > - if (crtc_state->has_drrs)
> > > - intel_edp_drrs_enable_locked(intel_dp);
> > > - else
> > > - intel_edp_drrs_disable_locked(intel_dp, crtc_state);
> > > -
> > > -unlock:
> > > - mutex_unlock(&dev_priv->drrs.mutex);
> > > -}
> > > -
> > > -static void intel_edp_drrs_downclock_work(struct work_struct *work)
> > > -{
> > > - struct drm_i915_private *dev_priv =
> > > - container_of(work, typeof(*dev_priv), drrs.work.work);
> > > - struct intel_dp *intel_dp;
> > > -
> > > - mutex_lock(&dev_priv->drrs.mutex);
> > > -
> > > - intel_dp = dev_priv->drrs.dp;
> > > -
> > > - if (!intel_dp)
> > > - goto unlock;
> > > -
> > > - /*
> > > - * The delayed work can race with an invalidate hence we need to
> > > - * recheck.
> > > - */
> > > -
> > > - if (dev_priv->drrs.busy_frontbuffer_bits)
> > > - goto unlock;
> > > -
> > > - if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) {
> > > - struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > > -
> > > - intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > > - drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode));
> > > - }
> > > -
> > > -unlock:
> > > - mutex_unlock(&dev_priv->drrs.mutex);
> > > -}
> > > -
> > > -/**
> > > - * intel_edp_drrs_invalidate - Disable Idleness DRRS
> > > - * @dev_priv: i915 device
> > > - * @frontbuffer_bits: frontbuffer plane tracking bits
> > > - *
> > > - * This function gets called everytime rendering on the given planes start.
> > > - * Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR).
> > > - *
> > > - * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
> > > - */
> > > -void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
> > > - unsigned int frontbuffer_bits)
> > > -{
> > > - struct intel_dp *intel_dp;
> > > - struct drm_crtc *crtc;
> > > - enum pipe pipe;
> > > -
> > > - if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
> > > - return;
> > > -
> > > - cancel_delayed_work(&dev_priv->drrs.work);
> > > -
> > > - mutex_lock(&dev_priv->drrs.mutex);
> > > -
> > > - intel_dp = dev_priv->drrs.dp;
> > > - if (!intel_dp) {
> > > - mutex_unlock(&dev_priv->drrs.mutex);
> > > - return;
> > > - }
> > > -
> > > - crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > > - pipe = to_intel_crtc(crtc)->pipe;
> > > -
> > > - frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
> > > - dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
> > > -
> > > - /* invalidate means busy screen hence upclock */
> > > - if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
> > > - intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > > - drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
> > > -
> > > - mutex_unlock(&dev_priv->drrs.mutex);
> > > -}
> > > -
> > > -/**
> > > - * intel_edp_drrs_flush - Restart Idleness DRRS
> > > - * @dev_priv: i915 device
> > > - * @frontbuffer_bits: frontbuffer plane tracking bits
> > > - *
> > > - * This function gets called every time rendering on the given planes has
> > > - * completed or flip on a crtc is completed. So DRRS should be upclocked
> > > - * (LOW_RR -> HIGH_RR). And also Idleness detection should be started again,
> > > - * if no other planes are dirty.
> > > - *
> > > - * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
> > > - */
> > > -void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
> > > - unsigned int frontbuffer_bits)
> > > -{
> > > - struct intel_dp *intel_dp;
> > > - struct drm_crtc *crtc;
> > > - enum pipe pipe;
> > > -
> > > - if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
> > > - return;
> > > -
> > > - cancel_delayed_work(&dev_priv->drrs.work);
> > > -
> > > - mutex_lock(&dev_priv->drrs.mutex);
> > > -
> > > - intel_dp = dev_priv->drrs.dp;
> > > - if (!intel_dp) {
> > > - mutex_unlock(&dev_priv->drrs.mutex);
> > > - return;
> > > - }
> > > -
> > > - crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > > - pipe = to_intel_crtc(crtc)->pipe;
> > > -
> > > - frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
> > > - dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits;
> > > -
> > > - /* flush means busy screen hence upclock */
> > > - if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
> > > - intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > > - drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
> > > -
> > > - /*
> > > - * flush also means no more activity hence schedule downclock, if all
> > > - * other fbs are quiescent too
> > > - */
> > > - if (!dev_priv->drrs.busy_frontbuffer_bits)
> > > - schedule_delayed_work(&dev_priv->drrs.work,
> > > - msecs_to_jiffies(1000));
> > > - mutex_unlock(&dev_priv->drrs.mutex);
> > > -}
> > > -
> > > -/**
> > > - * DOC: Display Refresh Rate Switching (DRRS)
> > > - *
> > > - * Display Refresh Rate Switching (DRRS) is a power conservation feature
> > > - * which enables swtching between low and high refresh rates,
> > > - * dynamically, based on the usage scenario. This feature is applicable
> > > - * for internal panels.
> > > - *
> > > - * Indication that the panel supports DRRS is given by the panel EDID, which
> > > - * would list multiple refresh rates for one resolution.
> > > - *
> > > - * DRRS is of 2 types - static and seamless.
> > > - * Static DRRS involves changing refresh rate (RR) by doing a full modeset
> > > - * (may appear as a blink on screen) and is used in dock-undock scenario.
> > > - * Seamless DRRS involves changing RR without any visual effect to the user
> > > - * and can be used during normal system usage. This is done by programming
> > > - * certain registers.
> > > - *
> > > - * Support for static/seamless DRRS may be indicated in the VBT based on
> > > - * inputs from the panel spec.
> > > - *
> > > - * DRRS saves power by switching to low RR based on usage scenarios.
> > > - *
> > > - * The implementation is based on frontbuffer tracking implementation. When
> > > - * there is a disturbance on the screen triggered by user activity or a periodic
> > > - * system activity, DRRS is disabled (RR is changed to high RR). When there is
> > > - * no movement on screen, after a timeout of 1 second, a switch to low RR is
> > > - * made.
> > > - *
> > > - * For integration with frontbuffer tracking code, intel_edp_drrs_invalidate()
> > > - * and intel_edp_drrs_flush() are called.
> > > - *
> > > - * DRRS can be further extended to support other internal panels and also
> > > - * the scenario of video playback wherein RR is set based on the rate
> > > - * requested by userspace.
> > > - */
> > > -
> > > -/**
> > > - * intel_dp_drrs_init - Init basic DRRS work and mutex.
> > > - * @connector: eDP connector
> > > - * @fixed_mode: preferred mode of panel
> > > - *
> > > - * This function is called only once at driver load to initialize basic
> > > - * DRRS stuff.
> > > - *
> > > - * Returns:
> > > - * Downclock mode if panel supports it, else return NULL.
> > > - * DRRS support is determined by the presence of downclock mode (apart
> > > - * from VBT setting).
> > > - */
> > > -static struct drm_display_mode *
> > > -intel_dp_drrs_init(struct intel_connector *connector,
> > > - struct drm_display_mode *fixed_mode)
> > > -{
> > > - struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > > - struct drm_display_mode *downclock_mode = NULL;
> > > -
> > > - INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work);
> > > - mutex_init(&dev_priv->drrs.mutex);
> > > -
> > > - if (DISPLAY_VER(dev_priv) <= 6) {
> > > - drm_dbg_kms(&dev_priv->drm,
> > > - "DRRS supported for Gen7 and above\n");
> > > - return NULL;
> > > - }
> > > -
> > > - if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) {
> > > - drm_dbg_kms(&dev_priv->drm, "VBT doesn't support DRRS\n");
> > > - return NULL;
> > > - }
> > > -
> > > - downclock_mode = intel_panel_edid_downclock_mode(connector, fixed_mode);
> > > - if (!downclock_mode) {
> > > - drm_dbg_kms(&dev_priv->drm,
> > > - "Downclock mode is not found. DRRS not supported\n");
> > > - return NULL;
> > > - }
> > > -
> > > - dev_priv->drrs.type = dev_priv->vbt.drrs_type;
> > > -
> > > - dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR;
> > > - drm_dbg_kms(&dev_priv->drm,
> > > - "seamless DRRS supported for eDP panel.\n");
> > > - return downclock_mode;
> > > -}
> > > -
> > > static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> > > struct intel_connector *intel_connector)
> > > {
> > > diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> > > index ae0f776bffab8..a28fff286c21a 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_dp.h
> > > +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> > > @@ -70,17 +70,6 @@ int intel_dp_max_link_rate(struct intel_dp *intel_dp);
> > > int intel_dp_max_lane_count(struct intel_dp *intel_dp);
> > > int intel_dp_rate_select(struct intel_dp *intel_dp, int rate);
> > >
> > > -void intel_edp_drrs_enable(struct intel_dp *intel_dp,
> > > - const struct intel_crtc_state *crtc_state);
> > > -void intel_edp_drrs_disable(struct intel_dp *intel_dp,
> > > - const struct intel_crtc_state *crtc_state);
> > > -void intel_edp_drrs_update(struct intel_dp *intel_dp,
> > > - const struct intel_crtc_state *crtc_state);
> > > -void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
> > > - unsigned int frontbuffer_bits);
> > > -void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
> > > - unsigned int frontbuffer_bits);
> > > -
> > > void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,
> > > u8 *link_bw, u8 *rate_select);
> > > bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp);
> > > diff --git a/drivers/gpu/drm/i915/display/intel_drrs.c b/drivers/gpu/drm/i915/display/intel_drrs.c
> > > new file mode 100644
> > > index 0000000000000..be9b6d4482f04
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/i915/display/intel_drrs.c
> > > @@ -0,0 +1,477 @@
> > > +// SPDX-License-Identifier: MIT
> > > +/*
> > > + * Copyright © 2021 Intel Corporation
> > > + */
> > > +
> > > +#include "i915_drv.h"
> > > +#include "intel_atomic.h"
> > > +#include "intel_de.h"
> > > +#include "intel_display_types.h"
> > > +#include "intel_drrs.h"
> > > +#include "intel_panel.h"
> > > +
> > > +/**
> > > + * DOC: Display Refresh Rate Switching (DRRS)
> > > + *
> > > + * Display Refresh Rate Switching (DRRS) is a power conservation feature
> > > + * which enables swtching between low and high refresh rates,
> > > + * dynamically, based on the usage scenario. This feature is applicable
> > > + * for internal panels.
> > > + *
> > > + * Indication that the panel supports DRRS is given by the panel EDID, which
> > > + * would list multiple refresh rates for one resolution.
> > > + *
> > > + * DRRS is of 2 types - static and seamless.
> > > + * Static DRRS involves changing refresh rate (RR) by doing a full modeset
> > > + * (may appear as a blink on screen) and is used in dock-undock scenario.
> > > + * Seamless DRRS involves changing RR without any visual effect to the user
> > > + * and can be used during normal system usage. This is done by programming
> > > + * certain registers.
> > > + *
> > > + * Support for static/seamless DRRS may be indicated in the VBT based on
> > > + * inputs from the panel spec.
> > > + *
> > > + * DRRS saves power by switching to low RR based on usage scenarios.
> > > + *
> > > + * The implementation is based on frontbuffer tracking implementation. When
> > > + * there is a disturbance on the screen triggered by user activity or a periodic
> > > + * system activity, DRRS is disabled (RR is changed to high RR). When there is
> > > + * no movement on screen, after a timeout of 1 second, a switch to low RR is
> > > + * made.
> > > + *
> > > + * For integration with frontbuffer tracking code, intel_edp_drrs_invalidate()
> > > + * and intel_edp_drrs_flush() are called.
> > > + *
> > > + * DRRS can be further extended to support other internal panels and also
> > > + * the scenario of video playback wherein RR is set based on the rate
> > > + * requested by userspace.
> > > + */
> > > +
> > > +void
> > > +intel_dp_drrs_compute_config(struct intel_dp *intel_dp,
> > > + struct intel_crtc_state *pipe_config,
> > > + int output_bpp, bool constant_n)
> > > +{
> > > + struct intel_connector *intel_connector = intel_dp->attached_connector;
> > > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > + int pixel_clock;
> > > +
> > > + if (pipe_config->vrr.enable)
> > > + return;
> > > +
> > > + /*
> > > + * DRRS and PSR can't be enable together, so giving preference to PSR
> > > + * as it allows more power-savings by complete shutting down display,
> > > + * so to guarantee this, intel_dp_drrs_compute_config() must be called
> > > + * after intel_psr_compute_config().
> > > + */
> > > + if (pipe_config->has_psr)
> > > + return;
> > > +
> > > + if (!intel_connector->panel.downclock_mode ||
> > > + dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
> > > + return;
> > > +
> > > + pipe_config->has_drrs = true;
> > > +
> > > + pixel_clock = intel_connector->panel.downclock_mode->clock;
> > > + if (pipe_config->splitter.enable)
> > > + pixel_clock /= pipe_config->splitter.link_count;
> > > +
> > > + intel_link_compute_m_n(output_bpp, pipe_config->lane_count, pixel_clock,
> > > + pipe_config->port_clock, &pipe_config->dp_m2_n2,
> > > + constant_n, pipe_config->fec_enable);
> > > +
> > > + /* FIXME: abstract this better */
> > > + if (pipe_config->splitter.enable)
> > > + pipe_config->dp_m2_n2.gmch_m *= pipe_config->splitter.link_count;
> > > +}
> > > +
> > > +/**
> > > + * intel_dp_set_drrs_state - program registers for RR switch to take effect
> > > + * @dev_priv: i915 device
> > > + * @crtc_state: a pointer to the active intel_crtc_state
> > > + * @refresh_rate: RR to be programmed
> >
> > ... but let's enjoy the opportunity and avoid doc style in static functions
> > that should never be called outside this block.
>
> Did that in the next patch, while renaming functions.
> Is that fine? Or it should be removed in this one?
I see even on patch 5 changes on this doc section:
- * @refresh_rate: RR to be programmed
+ * @refresh_type: high or low refresh rate to be programmed
So I believe the sooner the better.
>
> thanks for the reviews
Thank you for this great clean-up
>
> >
> > with this addressed feel free to use:
> > Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> >
> > > + *
> > > + * This function gets called when refresh rate (RR) has to be changed from
> > > + * one frequency to another. Switches can be between high and low RR
> > > + * supported by the panel or to any other RR based on media playback (in
> > > + * this case, RR value needs to be passed from user space).
> > > + *
> > > + * The caller of this function needs to take a lock on dev_priv->drrs.
> > > + */
> > > +static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv,
> > > + const struct intel_crtc_state *crtc_state,
> > > + int refresh_rate)
> > > +{
> > > + struct intel_dp *intel_dp = dev_priv->drrs.dp;
> > > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > + enum drrs_refresh_rate_type index = DRRS_HIGH_RR;
> > > +
> > > + if (refresh_rate <= 0) {
> > > + drm_dbg_kms(&dev_priv->drm,
> > > + "Refresh rate should be positive non-zero.\n");
> > > + return;
> > > + }
> > > +
> > > + if (intel_dp == NULL) {
> > > + drm_dbg_kms(&dev_priv->drm, "DRRS not supported.\n");
> > > + return;
> > > + }
> > > +
> > > + if (!crtc) {
> > > + drm_dbg_kms(&dev_priv->drm,
> > > + "DRRS: intel_crtc not initialized\n");
> > > + return;
> > > + }
> > > +
> > > + if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) {
> > > + drm_dbg_kms(&dev_priv->drm, "Only Seamless DRRS supported.\n");
> > > + return;
> > > + }
> > > +
> > > + if (drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode) ==
> > > + refresh_rate)
> > > + index = DRRS_LOW_RR;
> > > +
> > > + if (index == dev_priv->drrs.refresh_rate_type) {
> > > + drm_dbg_kms(&dev_priv->drm,
> > > + "DRRS requested for previously set RR...ignoring\n");
> > > + return;
> > > + }
> > > +
> > > + if (!crtc_state->hw.active) {
> > > + drm_dbg_kms(&dev_priv->drm,
> > > + "eDP encoder disabled. CRTC not Active\n");
> > > + return;
> > > + }
> > > +
> > > + if (DISPLAY_VER(dev_priv) >= 8 && !IS_CHERRYVIEW(dev_priv)) {
> > > + switch (index) {
> > > + case DRRS_HIGH_RR:
> > > + intel_dp_set_m_n(crtc_state, M1_N1);
> > > + break;
> > > + case DRRS_LOW_RR:
> > > + intel_dp_set_m_n(crtc_state, M2_N2);
> > > + break;
> > > + case DRRS_MAX_RR:
> > > + default:
> > > + drm_err(&dev_priv->drm,
> > > + "Unsupported refreshrate type\n");
> > > + }
> > > + } else if (DISPLAY_VER(dev_priv) > 6) {
> > > + i915_reg_t reg = PIPECONF(crtc_state->cpu_transcoder);
> > > + u32 val;
> > > +
> > > + val = intel_de_read(dev_priv, reg);
> > > + if (index > DRRS_HIGH_RR) {
> > > + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > > + val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV;
> > > + else
> > > + val |= PIPECONF_EDP_RR_MODE_SWITCH;
> > > + } else {
> > > + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> > > + val &= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV;
> > > + else
> > > + val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
> > > + }
> > > + intel_de_write(dev_priv, reg, val);
> > > + }
> > > +
> > > + dev_priv->drrs.refresh_rate_type = index;
> > > +
> > > + drm_dbg_kms(&dev_priv->drm, "eDP Refresh Rate set to : %dHz\n",
> > > + refresh_rate);
> > > +}
> > > +
> > > +static void
> > > +intel_edp_drrs_enable_locked(struct intel_dp *intel_dp)
> > > +{
> > > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > +
> > > + dev_priv->drrs.busy_frontbuffer_bits = 0;
> > > + dev_priv->drrs.dp = intel_dp;
> > > +}
> > > +
> > > +/**
> > > + * intel_edp_drrs_enable - init drrs struct if supported
> > > + * @intel_dp: DP struct
> > > + * @crtc_state: A pointer to the active crtc state.
> > > + *
> > > + * Initializes frontbuffer_bits and drrs.dp
> > > + */
> > > +void intel_edp_drrs_enable(struct intel_dp *intel_dp,
> > > + const struct intel_crtc_state *crtc_state)
> > > +{
> > > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > +
> > > + if (!crtc_state->has_drrs)
> > > + return;
> > > +
> > > + drm_dbg_kms(&dev_priv->drm, "Enabling DRRS\n");
> > > +
> > > + mutex_lock(&dev_priv->drrs.mutex);
> > > +
> > > + if (dev_priv->drrs.dp) {
> > > + drm_warn(&dev_priv->drm, "DRRS already enabled\n");
> > > + goto unlock;
> > > + }
> > > +
> > > + intel_edp_drrs_enable_locked(intel_dp);
> > > +
> > > +unlock:
> > > + mutex_unlock(&dev_priv->drrs.mutex);
> > > +}
> > > +
> > > +static void
> > > +intel_edp_drrs_disable_locked(struct intel_dp *intel_dp,
> > > + const struct intel_crtc_state *crtc_state)
> > > +{
> > > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > +
> > > + if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) {
> > > + int refresh;
> > > +
> > > + refresh = drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode);
> > > + intel_dp_set_drrs_state(dev_priv, crtc_state, refresh);
> > > + }
> > > +
> > > + dev_priv->drrs.dp = NULL;
> > > +}
> > > +
> > > +/**
> > > + * intel_edp_drrs_disable - Disable DRRS
> > > + * @intel_dp: DP struct
> > > + * @old_crtc_state: Pointer to old crtc_state.
> > > + *
> > > + */
> > > +void intel_edp_drrs_disable(struct intel_dp *intel_dp,
> > > + const struct intel_crtc_state *old_crtc_state)
> > > +{
> > > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > +
> > > + if (!old_crtc_state->has_drrs)
> > > + return;
> > > +
> > > + mutex_lock(&dev_priv->drrs.mutex);
> > > + if (!dev_priv->drrs.dp) {
> > > + mutex_unlock(&dev_priv->drrs.mutex);
> > > + return;
> > > + }
> > > +
> > > + intel_edp_drrs_disable_locked(intel_dp, old_crtc_state);
> > > + mutex_unlock(&dev_priv->drrs.mutex);
> > > +
> > > + cancel_delayed_work_sync(&dev_priv->drrs.work);
> > > +}
> > > +
> > > +/**
> > > + * intel_edp_drrs_update - Update DRRS state
> > > + * @intel_dp: Intel DP
> > > + * @crtc_state: new CRTC state
> > > + *
> > > + * This function will update DRRS states, disabling or enabling DRRS when
> > > + * executing fastsets. For full modeset, intel_edp_drrs_disable() and
> > > + * intel_edp_drrs_enable() should be called instead.
> > > + */
> > > +void
> > > +intel_edp_drrs_update(struct intel_dp *intel_dp,
> > > + const struct intel_crtc_state *crtc_state)
> > > +{
> > > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> > > +
> > > + if (dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT)
> > > + return;
> > > +
> > > + mutex_lock(&dev_priv->drrs.mutex);
> > > +
> > > + /* New state matches current one? */
> > > + if (crtc_state->has_drrs == !!dev_priv->drrs.dp)
> > > + goto unlock;
> > > +
> > > + if (crtc_state->has_drrs)
> > > + intel_edp_drrs_enable_locked(intel_dp);
> > > + else
> > > + intel_edp_drrs_disable_locked(intel_dp, crtc_state);
> > > +
> > > +unlock:
> > > + mutex_unlock(&dev_priv->drrs.mutex);
> > > +}
> > > +
> > > +static void intel_edp_drrs_downclock_work(struct work_struct *work)
> > > +{
> > > + struct drm_i915_private *dev_priv =
> > > + container_of(work, typeof(*dev_priv), drrs.work.work);
> > > + struct intel_dp *intel_dp;
> > > +
> > > + mutex_lock(&dev_priv->drrs.mutex);
> > > +
> > > + intel_dp = dev_priv->drrs.dp;
> > > +
> > > + if (!intel_dp)
> > > + goto unlock;
> > > +
> > > + /*
> > > + * The delayed work can race with an invalidate hence we need to
> > > + * recheck.
> > > + */
> > > +
> > > + if (dev_priv->drrs.busy_frontbuffer_bits)
> > > + goto unlock;
> > > +
> > > + if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) {
> > > + struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > > +
> > > + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > > + drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode));
> > > + }
> > > +
> > > +unlock:
> > > + mutex_unlock(&dev_priv->drrs.mutex);
> > > +}
> > > +
> > > +/**
> > > + * intel_edp_drrs_invalidate - Disable Idleness DRRS
> > > + * @dev_priv: i915 device
> > > + * @frontbuffer_bits: frontbuffer plane tracking bits
> > > + *
> > > + * This function gets called everytime rendering on the given planes start.
> > > + * Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR).
> > > + *
> > > + * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
> > > + */
> > > +void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
> > > + unsigned int frontbuffer_bits)
> > > +{
> > > + struct intel_dp *intel_dp;
> > > + struct drm_crtc *crtc;
> > > + enum pipe pipe;
> > > +
> > > + if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
> > > + return;
> > > +
> > > + cancel_delayed_work(&dev_priv->drrs.work);
> > > +
> > > + mutex_lock(&dev_priv->drrs.mutex);
> > > +
> > > + intel_dp = dev_priv->drrs.dp;
> > > + if (!intel_dp) {
> > > + mutex_unlock(&dev_priv->drrs.mutex);
> > > + return;
> > > + }
> > > +
> > > + crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > > + pipe = to_intel_crtc(crtc)->pipe;
> > > +
> > > + frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
> > > + dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits;
> > > +
> > > + /* invalidate means busy screen hence upclock */
> > > + if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
> > > + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > > + drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
> > > +
> > > + mutex_unlock(&dev_priv->drrs.mutex);
> > > +}
> > > +
> > > +/**
> > > + * intel_edp_drrs_flush - Restart Idleness DRRS
> > > + * @dev_priv: i915 device
> > > + * @frontbuffer_bits: frontbuffer plane tracking bits
> > > + *
> > > + * This function gets called every time rendering on the given planes has
> > > + * completed or flip on a crtc is completed. So DRRS should be upclocked
> > > + * (LOW_RR -> HIGH_RR). And also Idleness detection should be started again,
> > > + * if no other planes are dirty.
> > > + *
> > > + * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits.
> > > + */
> > > +void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
> > > + unsigned int frontbuffer_bits)
> > > +{
> > > + struct intel_dp *intel_dp;
> > > + struct drm_crtc *crtc;
> > > + enum pipe pipe;
> > > +
> > > + if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED)
> > > + return;
> > > +
> > > + cancel_delayed_work(&dev_priv->drrs.work);
> > > +
> > > + mutex_lock(&dev_priv->drrs.mutex);
> > > +
> > > + intel_dp = dev_priv->drrs.dp;
> > > + if (!intel_dp) {
> > > + mutex_unlock(&dev_priv->drrs.mutex);
> > > + return;
> > > + }
> > > +
> > > + crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
> > > + pipe = to_intel_crtc(crtc)->pipe;
> > > +
> > > + frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
> > > + dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits;
> > > +
> > > + /* flush means busy screen hence upclock */
> > > + if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
> > > + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
> > > + drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode));
> > > +
> > > + /*
> > > + * flush also means no more activity hence schedule downclock, if all
> > > + * other fbs are quiescent too
> > > + */
> > > + if (!dev_priv->drrs.busy_frontbuffer_bits)
> > > + schedule_delayed_work(&dev_priv->drrs.work,
> > > + msecs_to_jiffies(1000));
> > > + mutex_unlock(&dev_priv->drrs.mutex);
> > > +}
> > > +
> > > +/**
> > > + * intel_dp_drrs_init - Init basic DRRS work and mutex.
> > > + * @connector: eDP connector
> > > + * @fixed_mode: preferred mode of panel
> > > + *
> > > + * This function is called only once at driver load to initialize basic
> > > + * DRRS stuff.
> > > + *
> > > + * Returns:
> > > + * Downclock mode if panel supports it, else return NULL.
> > > + * DRRS support is determined by the presence of downclock mode (apart
> > > + * from VBT setting).
> > > + */
> > > +struct drm_display_mode *
> > > +intel_dp_drrs_init(struct intel_connector *connector,
> > > + struct drm_display_mode *fixed_mode)
> > > +{
> > > + struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > > + struct drm_display_mode *downclock_mode = NULL;
> > > +
> > > + INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work);
> > > + mutex_init(&dev_priv->drrs.mutex);
> > > +
> > > + if (DISPLAY_VER(dev_priv) <= 6) {
> > > + drm_dbg_kms(&dev_priv->drm,
> > > + "DRRS supported for Gen7 and above\n");
> > > + return NULL;
> > > + }
> > > +
> > > + if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) {
> > > + drm_dbg_kms(&dev_priv->drm, "VBT doesn't support DRRS\n");
> > > + return NULL;
> > > + }
> > > +
> > > + downclock_mode = intel_panel_edid_downclock_mode(connector, fixed_mode);
> > > + if (!downclock_mode) {
> > > + drm_dbg_kms(&dev_priv->drm,
> > > + "Downclock mode is not found. DRRS not supported\n");
> > > + return NULL;
> > > + }
> > > +
> > > + dev_priv->drrs.type = dev_priv->vbt.drrs_type;
> > > +
> > > + dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR;
> > > + drm_dbg_kms(&dev_priv->drm,
> > > + "seamless DRRS supported for eDP panel.\n");
> > > + return downclock_mode;
> > > +}
> > > diff --git a/drivers/gpu/drm/i915/display/intel_drrs.h b/drivers/gpu/drm/i915/display/intel_drrs.h
> > > new file mode 100644
> > > index 0000000000000..ffa175b4cf4f4
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/i915/display/intel_drrs.h
> > > @@ -0,0 +1,32 @@
> > > +/* SPDX-License-Identifier: MIT */
> > > +/*
> > > + * Copyright © 2021 Intel Corporation
> > > + */
> > > +
> > > +#ifndef __INTEL_DRRS_H__
> > > +#define __INTEL_DRRS_H__
> > > +
> > > +#include <linux/types.h>
> > > +
> > > +struct drm_i915_private;
> > > +struct intel_crtc_state;
> > > +struct intel_connector;
> > > +struct intel_dp;
> > > +
> > > +void intel_edp_drrs_enable(struct intel_dp *intel_dp,
> > > + const struct intel_crtc_state *crtc_state);
> > > +void intel_edp_drrs_disable(struct intel_dp *intel_dp,
> > > + const struct intel_crtc_state *crtc_state);
> > > +void intel_edp_drrs_update(struct intel_dp *intel_dp,
> > > + const struct intel_crtc_state *crtc_state);
> > > +void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
> > > + unsigned int frontbuffer_bits);
> > > +void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,
> > > + unsigned int frontbuffer_bits);
> > > +void intel_dp_drrs_compute_config(struct intel_dp *intel_dp,
> > > + struct intel_crtc_state *pipe_config,
> > > + int output_bpp, bool constant_n);
> > > +struct drm_display_mode *intel_dp_drrs_init(struct intel_connector *connector,
> > > + struct drm_display_mode *fixed_mode);
> > > +
> > > +#endif /* __INTEL_DRRS_H__ */
> > > diff --git a/drivers/gpu/drm/i915/display/intel_frontbuffer.c b/drivers/gpu/drm/i915/display/intel_frontbuffer.c
> > > index 8e75debcce1a9..e4834d84ce5e3 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_frontbuffer.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_frontbuffer.c
> > > @@ -62,6 +62,7 @@
> > > #include "intel_display_types.h"
> > > #include "intel_fbc.h"
> > > #include "intel_frontbuffer.h"
> > > +#include "intel_drrs.h"
> > > #include "intel_psr.h"
> > >
> > > /**
> > > --
> > > 2.33.0
> > >
>
