Re: [V3 2/7] drm/i915/jsl: program DSI panel GPIOs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 10 Aug 2021, Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> wrote:
>On Fri, 23 Jul 2021, Lee Shawn C <shawn.c.lee@xxxxxxxxx> wrote:
>> DSI driver should have its own implementation to toggle gpio pins 
>> based on GPIO info coming from VBT sequences.
>
>Why?
>

Without this change, we are not able to control gpio signal output to
meet MIPI panel's requirement for power on/off sequence.

>>
>> Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
>> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
>> Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
>> Cc: Cooper Chiou <cooper.chiou@xxxxxxxxx>
>> Cc: William Tseng <william.tseng@xxxxxxxxx>
>> Signed-off-by: Lee Shawn C <shawn.c.lee@xxxxxxxxx>
>> ---
>>  drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 44 +++++++++++++++++++-
>>  drivers/gpu/drm/i915/i915_reg.h              | 10 +++++
>>  2 files changed, 53 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c 
>> b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
>> index cc93e045a425..dd03e5629ba6 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
>> @@ -43,6 +43,7 @@
>>  #include "intel_display_types.h"
>>  #include "intel_dsi.h"
>>  #include "intel_sideband.h"
>> +#include "intel_de.h"
>>  
>>  #define MIPI_TRANSFER_MODE_SHIFT	0
>>  #define MIPI_VIRTUAL_CHANNEL_SHIFT	1
>> @@ -354,7 +355,48 @@ static void bxt_exec_gpio(struct drm_i915_private 
>> *dev_priv,  static void icl_exec_gpio(struct drm_i915_private *dev_priv,
>>  			  u8 gpio_source, u8 gpio_index, bool value)  {
>> -	drm_dbg_kms(&dev_priv->drm, "Skipping ICL GPIO element execution\n");
>> +	u32 val;
>> +
>> +	switch (gpio_index) {
>> +	case ICL_GPIO_L_VDDEN_1:
>> +		val = intel_de_read(dev_priv, ICP_PP_CONTROL(1));
>> +		if (value)
>> +			val |= PWR_STATE_TARGET;
>> +		else
>> +			val &= ~PWR_STATE_TARGET;
>> +		intel_de_write(dev_priv, ICP_PP_CONTROL(1), val);
>
>All the PPS access should be in intel_pps.[ch] and protected with the pps mutex.
>

OK! We will move icl_exec_gpio() into intel_pps.c and use pps mutex to protect it.

>> +		break;
>> +	case ICL_GPIO_L_BKLTEN_1:
>> +		val = intel_de_read(dev_priv, ICP_PP_CONTROL(1));
>> +		if (value)
>> +			val |= BACKLIGHT_ENABLE;
>> +		else
>> +			val &= ~BACKLIGHT_ENABLE;
>> +		intel_de_write(dev_priv, ICP_PP_CONTROL(1), val);
>> +		break;
>> +	case ICL_GPIO_DDPA_CTRLCLK_1:
>> +		val = intel_de_read(dev_priv, GPIO(1));
>> +		if (value)
>> +			val |= GPIO_CLOCK_VAL_OUT;
>> +		else
>> +			val &= ~GPIO_CLOCK_VAL_OUT;
>> +		val |= GPIO_CLOCK_DIR_MASK | GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_VAL_MASK;
>> +		intel_de_write(dev_priv, GPIO(1), val);
>> +		break;
>> +	case ICL_GPIO_DDPA_CTRLDATA_1:
>> +		val = intel_de_read(dev_priv, GPIO(1));
>> +		if (value)
>> +			val |= GPIO_DATA_VAL_OUT;
>> +		else
>> +			val &= ~GPIO_DATA_VAL_OUT;
>> +		val |= GPIO_DATA_DIR_MASK | GPIO_DATA_DIR_OUT | GPIO_DATA_VAL_MASK;
>> +		intel_de_write(dev_priv, GPIO(1), val);
>> +		break;
>> +	default:
>> +		/* TODO: Add support for remaining GPIOs */
>> +		DRM_ERROR("Invalid GPIO number (%d) from VBT\n", gpio_index);
>> +		break;
>> +	}
>>  }
>>  
>>  static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 
>> *data) diff --git a/drivers/gpu/drm/i915/i915_reg.h 
>> b/drivers/gpu/drm/i915/i915_reg.h index 943fe485c662..b725234e0e9c 
>> 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -5143,6 +5143,16 @@ enum {
>>  #define _PP_STATUS			0x61200
>>  #define PP_STATUS(pps_idx)		_MMIO_PPS(pps_idx, _PP_STATUS)
>>  #define   PP_ON				REG_BIT(31)
>> +
>> +#define _PP_CONTROL_1			0xc7204
>> +#define _PP_CONTROL_2			0xc7304
>> +#define ICP_PP_CONTROL(x)		_MMIO(((x) == 1) ? _PP_CONTROL_1 : \
>> +					      _PP_CONTROL_2)
>> +#define  POWER_CYCLE_DELAY_MASK		REG_GENMASK(8, 4)
>> +#define  VDD_OVERRIDE_FORCE		REG_BIT(3)
>> +#define  BACKLIGHT_ENABLE		REG_BIT(2)
>> +#define  PWR_DOWN_ON_RESET		REG_BIT(1)
>> +#define  PWR_STATE_TARGET		REG_BIT(0)
>
>These are all duplicate defines for existing PP_CONTROL() registers and macros.

I found this patch on drm-tip branch and removed PP_CONTRL() defines.
https://patchwork.freedesktop.org/patch/291095/

Best regards,
Shawn

>
>>  /*
>>   * Indicates that all dependencies of the panel are on:
>>   *
>
>--
>Jani Nikula, Intel Open Source Graphics Center
>




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux