On Tue, Jul 20, 2021 at 5:16 PM Daniel Vetter <daniel@xxxxxxxx> wrote:
> On Tue, Jul 20, 2021 at 5:09 PM Daniel Vetter <daniel@xxxxxxxx> wrote:
> > On Mon, Jan 4, 2021 at 9:56 PM José Roberto de Souza
> > <jose.souza@xxxxxxxxx> wrote:
> > >
> > > Now using plane damage clips property to calcualte the damaged area.
> > > Selective fetch only supports one region to be fetched so software
> > > needs to calculate a bounding box around all damage clips.
> > >
> > > Now that we are not complete fetching each plane, there is another
> > > loop needed as all the plane areas that intersect with the pipe
> > > damaged area needs to be fetched from memory so the complete blending
> > > of all planes can happen.
> > >
> > > v2:
> > > - do not shifting new_plane_state->uapi.dst only src is in 16.16 format
> > >
> > > v4:
> > > - setting plane selective fetch area using the whole pipe damage area
> > > - mark the whole plane area damaged if plane visibility or alpha
> > > changed
> > >
> > > v5:
> > > - taking in consideration src.y1 in the damage coordinates
> > > - adding to the pipe damaged area planes that were visible but are
> > > invisible in the new state
> > >
> > > v6:
> > > - consider old state plane coordinates when visibility changes or it
> > > moved to calculate damaged area
> > > - remove from damaged area the portion not in src clip
> > >
> > > v7:
> > > - intersec every damage clip with src to minimize damaged area
> > >
> > > v8:
> > > - adjust pipe_damaged area to 4 lines grouping
> > > - adjust calculation now that is understood that uapi.src is the
> > > framebuffer coordinates that plane will start to fetch from
> > >
> > > v9:
> > > - Only add plane dst or src to damaged_area if visible
> > > - Early skip plane damage calculation if it was not visible in old and
> > > new state
> > >
> > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > Cc: Gwan-gyeong Mun <gwan-gyeong.mun@xxxxxxxxx>
> > > Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@xxxxxxxxx>
> > > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> >
> > Why is this not using drm_atomic_helper_damage_merged? I just stumbled
> > over this, and this is one of the only two drivers that directly digs
> > around in the damage area, and seems to reinvent a bunch of the stuff
> > here.
>
> Also, did we merge the igts for this stuff? They unfortunately never
> landed, when vmwgfx team did all this work, but for i915 we really
> shouldn't even land new support without tests.
Lo and behold, we merge the uapi enabling way earlier than this patch here:
commit 093a3a30000926b8bda9eef773e4ed5079053350
Author: José Roberto de Souza <jose.souza@xxxxxxxxx>
Date: Thu Jun 25 18:01:47 2020 -0700
drm/i915: Add plane damage clips property
And the igts are nowhere near to be seen, at least the stuff from
vmwgfx didn't land. Please file a JIRA internally and ping me on that
so this gets sorted out asap.
Thanks, Daniel
> > > ---
> > > drivers/gpu/drm/i915/display/intel_psr.c | 113 ++++++++++++++++++++---
> > > 1 file changed, 99 insertions(+), 14 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
> > > index d9a395c486d3..f5b9519b3756 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_psr.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> > > @@ -1242,9 +1242,11 @@ static void psr2_man_trk_ctl_calc(struct intel_crtc_state *crtc_state,
> > > if (clip->y1 == -1)
> > > goto exit;
> > >
> > > + drm_WARN_ON(crtc_state->uapi.crtc->dev, clip->y1 % 4 || clip->y2 % 4);
> > > +
> > > val |= PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE;
> > > val |= PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(clip->y1 / 4 + 1);
> > > - val |= PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(DIV_ROUND_UP(clip->y2, 4) + 1);
> > > + val |= PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(clip->y2 / 4 + 1);
> > > exit:
> > > crtc_state->psr2_man_track_ctl = val;
> > > }
> > > @@ -1269,8 +1271,8 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> > > struct intel_crtc *crtc)
> > > {
> > > struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
> > > + struct drm_rect pipe_clip = { .x1 = 0, .y1 = -1, .x2 = INT_MAX, .y2 = -1 };
> > > struct intel_plane_state *new_plane_state, *old_plane_state;
> > > - struct drm_rect pipe_clip = { .y1 = -1 };
> > > struct intel_plane *plane;
> > > bool full_update = false;
> > > int i, ret;
> > > @@ -1282,13 +1284,25 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> > > if (ret)
> > > return ret;
> > >
> > > + /*
> > > + * Calculate minimal selective fetch area of each plane and calculate
> > > + * the pipe damaged area.
> > > + * In the next loop the plane selective fetch area will actually be set
> > > + * using whole pipe damaged area.
> > > + */
> > > for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state,
> > > new_plane_state, i) {
> > > - struct drm_rect *sel_fetch_area, temp;
> > > + struct drm_rect src, damaged_area = { .y1 = -1 };
> > > + struct drm_mode_rect *damaged_clips;
> > > + u32 num_clips, j;
> > >
> > > if (new_plane_state->uapi.crtc != crtc_state->uapi.crtc)
> > > continue;
> > >
> > > + if (!new_plane_state->uapi.visible &&
> > > + !old_plane_state->uapi.visible)
> > > + continue;
> > > +
> > > /*
> > > * TODO: Not clear how to handle planes with negative position,
> > > * also planes are not updated if they have a negative X
> > > @@ -1300,23 +1314,94 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
> > > break;
> > > }
> > >
> > > - if (!new_plane_state->uapi.visible)
> > > - continue;
> > > + num_clips = drm_plane_get_damage_clips_count(&new_plane_state->uapi);
> > >
> > > /*
> > > - * For now doing a selective fetch in the whole plane area,
> > > - * optimizations will come in the future.
> > > + * If visibility or plane moved, mark the whole plane area as
> > > + * damaged as it needs to be complete redraw in the new and old
> > > + * position.
> > > */
> > > - sel_fetch_area = &new_plane_state->psr2_sel_fetch_area;
> > > - sel_fetch_area->y1 = new_plane_state->uapi.src.y1 >> 16;
> > > - sel_fetch_area->y2 = new_plane_state->uapi.src.y2 >> 16;
> > > + if (new_plane_state->uapi.visible != old_plane_state->uapi.visible ||
> > > + !drm_rect_equals(&new_plane_state->uapi.dst,
> > > + &old_plane_state->uapi.dst)) {
> > > + if (old_plane_state->uapi.visible) {
> > > + damaged_area.y1 = old_plane_state->uapi.dst.y1;
> > > + damaged_area.y2 = old_plane_state->uapi.dst.y2;
> > > + clip_area_update(&pipe_clip, &damaged_area);
> > > + }
> > > +
> > > + if (new_plane_state->uapi.visible) {
> > > + damaged_area.y1 = new_plane_state->uapi.dst.y1;
> > > + damaged_area.y2 = new_plane_state->uapi.dst.y2;
> > > + clip_area_update(&pipe_clip, &damaged_area);
> > > + }
> > > + continue;
> > > + } else if (new_plane_state->uapi.alpha != old_plane_state->uapi.alpha ||
> > > + (!num_clips &&
> > > + new_plane_state->uapi.fb != old_plane_state->uapi.fb)) {
> > > + /*
> > > + * If the plane don't have damaged areas but the
> > > + * framebuffer changed or alpha changed, mark the whole
> > > + * plane area as damaged.
> > > + */
> > > + damaged_area.y1 = new_plane_state->uapi.dst.y1;
> > > + damaged_area.y2 = new_plane_state->uapi.dst.y2;
> > > + clip_area_update(&pipe_clip, &damaged_area);
> > > + continue;
> > > + }
> > > +
> > > + drm_rect_fp_to_int(&src, &new_plane_state->uapi.src);
> > > + damaged_clips = drm_plane_get_damage_clips(&new_plane_state->uapi);
> > > +
> > > + for (j = 0; j < num_clips; j++) {
> > > + struct drm_rect clip;
> > > +
> > > + clip.x1 = damaged_clips[j].x1;
> > > + clip.y1 = damaged_clips[j].y1;
> > > + clip.x2 = damaged_clips[j].x2;
> > > + clip.y2 = damaged_clips[j].y2;
> > > + if (drm_rect_intersect(&clip, &src))
> > > + clip_area_update(&damaged_area, &clip);
> > > + }
> > >
> > > - temp = *sel_fetch_area;
> > > - temp.y1 += new_plane_state->uapi.dst.y1;
> > > - temp.y2 += new_plane_state->uapi.dst.y2;
> > > - clip_area_update(&pipe_clip, &temp);
> > > + if (damaged_area.y1 == -1)
> > > + continue;
> > > +
> > > + damaged_area.y1 += new_plane_state->uapi.dst.y1 - src.y1;
> > > + damaged_area.y2 += new_plane_state->uapi.dst.y1 - src.y1;
> > > + clip_area_update(&pipe_clip, &damaged_area);
> > > + }
> > > +
> > > + if (full_update)
> > > + goto skip_sel_fetch_set_loop;
> > > +
> > > + /* It must be aligned to 4 lines */
> > > + pipe_clip.y1 -= pipe_clip.y1 % 4;
> > > + if (pipe_clip.y2 % 4)
> > > + pipe_clip.y2 = ((pipe_clip.y2 / 4) + 1) * 4;
> > > +
> > > + /*
> > > + * Now that we have the pipe damaged area check if it intersect with
> > > + * every plane, if it does set the plane selective fetch area.
> > > + */
> > > + for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state,
> > > + new_plane_state, i) {
> > > + struct drm_rect *sel_fetch_area, inter;
> > > +
> > > + if (new_plane_state->uapi.crtc != crtc_state->uapi.crtc ||
> > > + !new_plane_state->uapi.visible)
> > > + continue;
> > > +
> > > + inter = pipe_clip;
> > > + if (!drm_rect_intersect(&inter, &new_plane_state->uapi.dst))
> > > + continue;
> > > +
> > > + sel_fetch_area = &new_plane_state->psr2_sel_fetch_area;
> > > + sel_fetch_area->y1 = inter.y1 - new_plane_state->uapi.dst.y1;
> > > + sel_fetch_area->y2 = inter.y2 - new_plane_state->uapi.dst.y1;
> > > }
> > >
> > > +skip_sel_fetch_set_loop:
> > > psr2_man_trk_ctl_calc(crtc_state, &pipe_clip, full_update);
> > > return 0;
> > > }
> > > --
> > > 2.30.0
> > >
> > > _______________________________________________
> > > Intel-gfx mailing list
> > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >
> >
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
>
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
