[PATCH v2 03/12] drm/i915/skl: Use revid->stepping tables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Switch SKL to use a revid->stepping table as we're trying to do on all
platforms going forward.  Also drop the preproduction revisions and add
the newer steppings we hadn't already handled.

Note that SKL has a case where a newer revision ID corresponds to an
older GT/disp stepping (0x9 -> STEP_J0, 0xA -> STEP_I1).  Also, the lack
of a revision ID 0x8 in the table is intentional and not an oversight.
We'll re-write the KBL-specific comment to make it clear that these kind
of quirks are expected.

v2:
 - Since GT and display steppings are always identical on SKL use a
   macro to set both values at once in a more readable manner.  (Anusha)
 - Drop preproduction steppings.

Bspec: 13626
Cc: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
---
 drivers/gpu/drm/i915/gt/intel_workarounds.c |  2 +-
 drivers/gpu/drm/i915/i915_drv.h             | 11 +-------
 drivers/gpu/drm/i915/intel_step.c           | 30 +++++++++++++++++----
 drivers/gpu/drm/i915/intel_step.h           |  4 +++
 4 files changed, 31 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_workarounds.c b/drivers/gpu/drm/i915/gt/intel_workarounds.c
index d9a5a445ceec..6dfd564e078f 100644
--- a/drivers/gpu/drm/i915/gt/intel_workarounds.c
+++ b/drivers/gpu/drm/i915/gt/intel_workarounds.c
@@ -883,7 +883,7 @@ skl_gt_workarounds_init(struct drm_i915_private *i915, struct i915_wa_list *wal)
 		    GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE);
 
 	/* WaInPlaceDecompressionHang:skl */
-	if (IS_SKL_REVID(i915, SKL_REVID_H0, REVID_FOREVER))
+	if (IS_SKL_GT_STEP(i915, STEP_H0, STEP_FOREVER))
 		wa_write_or(wal,
 			    GEN9_GAMT_ECO_REG_RW_IA,
 			    GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index c4747f4407ef..f30499ed6787 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1515,16 +1515,7 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 #define IS_TGL_Y(dev_priv) \
 	IS_SUBPLATFORM(dev_priv, INTEL_TIGERLAKE, INTEL_SUBPLATFORM_ULX)
 
-#define SKL_REVID_A0		0x0
-#define SKL_REVID_B0		0x1
-#define SKL_REVID_C0		0x2
-#define SKL_REVID_D0		0x3
-#define SKL_REVID_E0		0x4
-#define SKL_REVID_F0		0x5
-#define SKL_REVID_G0		0x6
-#define SKL_REVID_H0		0x7
-
-#define IS_SKL_REVID(p, since, until) (IS_SKYLAKE(p) && IS_REVID(p, since, until))
+#define IS_SKL_GT_STEP(p, since, until) (IS_SKYLAKE(p) && IS_GT_STEP(p, since, until))
 
 #define BXT_REVID_A0		0x0
 #define BXT_REVID_A1		0x1
diff --git a/drivers/gpu/drm/i915/intel_step.c b/drivers/gpu/drm/i915/intel_step.c
index 93ccd42f2514..69c928b046e8 100644
--- a/drivers/gpu/drm/i915/intel_step.c
+++ b/drivers/gpu/drm/i915/intel_step.c
@@ -7,14 +7,31 @@
 #include "intel_step.h"
 
 /*
- * KBL revision ID ordering is bizarre; higher revision ID's map to lower
- * steppings in some cases.  So rather than test against the revision ID
- * directly, let's map that into our own range of increasing ID's that we
- * can test against in a regular manner.
+ * Some platforms have unusual ways of mapping PCI revision ID to GT/display
+ * steppings.  E.g., in some cases a higher PCI revision may translate to a
+ * lower stepping of the GT and/or display IP.  This file provides lookup
+ * tables to map the PCI revision into a standard set of stepping values that
+ * can be compared numerically.
+ *
+ * Also note that some revisions/steppings may have been set aside as
+ * placeholders but never materialized in real hardware; in those cases there
+ * may be jumps in the revision IDs or stepping values in the tables below.
  */
 
+/*
+ * Some platforms always have the same stepping value for GT and display;
+ * use a macro to define these to make it easier to identify the platforms
+ * where the two steppings can deviate.
+ */
+#define COMMON_STEPPING(x)  .gt_step = STEP_##x, .display_step = STEP_##x
+
+static const struct intel_step_info skl_revids[] = {
+	[0x6] = { COMMON_STEPPING(G0) },
+	[0x7] = { COMMON_STEPPING(H0) },
+	[0x9] = { COMMON_STEPPING(J0) },
+	[0xA] = { COMMON_STEPPING(I1) },
+};
 
-/* FIXME: what about REVID_E0 */
 static const struct intel_step_info kbl_revids[] = {
 	[0] = { .gt_step = STEP_A0, .display_step = STEP_A0 },
 	[1] = { .gt_step = STEP_B0, .display_step = STEP_B0 },
@@ -76,6 +93,9 @@ void intel_step_init(struct drm_i915_private *i915)
 	} else if (IS_KABYLAKE(i915)) {
 		revids = kbl_revids;
 		size = ARRAY_SIZE(kbl_revids);
+	} else if (IS_SKYLAKE(i915)) {
+		revids = skl_revids;
+		size = ARRAY_SIZE(skl_revids);
 	}
 
 	/* Not using the stepping scheme for the platform yet. */
diff --git a/drivers/gpu/drm/i915/intel_step.h b/drivers/gpu/drm/i915/intel_step.h
index 958a8bb5d677..88a77159703e 100644
--- a/drivers/gpu/drm/i915/intel_step.h
+++ b/drivers/gpu/drm/i915/intel_step.h
@@ -31,6 +31,10 @@ enum intel_step {
 	STEP_E0,
 	STEP_F0,
 	STEP_G0,
+	STEP_H0,
+	STEP_I0,
+	STEP_I1,
+	STEP_J0,
 	STEP_FUTURE,
 	STEP_FOREVER,
 };
-- 
2.25.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux