Re: [PATCH 00/30] drm/i915/gem: ioctl clean-ups (v9)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jul 08, 2021 at 10:48:05AM -0500, Jason Ekstrand wrote:
> Overview:
> ---------
> 
> This patch series attempts to clean up some of the IOCTL mess we've created
> over the last few years.  The most egregious bit being context mutability.
> In summary, this series:
> 
>  1. Drops two never-used context params: RINGSIZE and NO_ZEROMAP
>  2. Drops the entire CONTEXT_CLONE API
>  3. Implements SINGLE_TIMELINE with a syncobj instead of actually sharing
>     intel_timeline between engines.
>  4. Adds a few sanity restrictions to the balancing/bonding API.
>  5. Implements a proto-ctx mechanism so that the engine set and VM can only
>     be set early on in the lifetime of a context, before anything ever
>     executes on it.  This effectively makes the VM and engine set
>     immutable.
> 
> This series has been tested with IGT as well as the Iris, ANV, and the
> Intel media driver doing an 8K decode (this uses bonding/balancing).  I've
> also done quite a bit of git archeology to ensure that nothing in here will
> break anything that's already shipped at some point in history.  It's
> possible I've missed something, but I've dug quite a bit.
> 
> 
> Details and motivation:
> -----------------------
> 
> In very broad strokes, there's an effort going on right now within Intel to
> try and clean up and simplify i915 anywhere we can.  We obviously don't
> want to break any shipping userspace but, as can be seen by this series,
> there's a lot i915 theoretically supports which userspace doesn't actually
> need.  Some of this, like the two context params used here, were simply
> oversights where we went through the usual API review process and merged
> the i915 bits but the userspace bits never landed for some reason.
> 
> Not all are so innocent, however.  For instance, there's an entire context
> cloning API which allows one to create a context with certain parameters
> "cloned" from some other context.  This entire API has never been used by
> any userspace except IGT and there were never patches to any other
> userspace to use it.  It never should have landed.  Also, when we added
> support for setting explicit engine sets and sharing VMs across contexts,
> people decided to do so via SET_CONTEXT_PARAM.  While this allowed them to
> re-use existing API, it did so at the cost of making those states mutable
> which leads to a plethora of potential race conditions.  There were even
> IGT tests merged to cover some of theses:
> 
>  - gem_vm_create@async-destroy and gem_vm_create@destroy-race which test
>    swapping out the VM on a running context.
> 
>  - gem_ctx_persistence@replace* which test whether a client can escape a
>    non-persistent context by submitting a hanging batch and then swapping
>    out the engine set before the hang is detected.
> 
>  - api_intel_bb@bb-with-vm which tests the that intel_bb_assign_vm works
>    properly.  This API is never used by any other IGT test.
> 
> There is also an entire deferred flush and set state framework in
> i915_gem_cotnext.c which exists for safely swapping out the VM while there
> is work in-flight on a context.
> 
> So, clearly people knew that this API was inherently racy and difficult to
> implement but they landed it anyway.  Why?  The best explanation I've been
> given is because it makes the API more "unified" or "symmetric" for this
> stuff to go through SET_CONTEXT_PARAM.  It's not because any userspace
> actually wants to be able to swap out the VM or the set of engines on a
> running context.  That would be utterly insane.
> 
> This patch series cleans up this particular mess by introducing the concept
> of a i915_gem_proto_context data structure which contains context creation
> information.  When you initially call GEM_CONTEXT_CREATE, a proto-context
> in created instead of an actual context.  Then, the first time something is
> done on the context besides SET_CONTEXT_PARAM, an actual context is
> created.  This allows us to keep the old drivers which use
> SET_CONTEXT_PARAM to set up the engine set (see also media) while ensuring
> that, once you have an i915_gem_context, the VM and the engine set are
> immutable state.
> 
> Eventually, there are more clean-ups I'd like to do on top of this which
> should make working with contexts inside i915 simpler and safer:
> 
>  1. Move the GEM handle -> vma LUT from i915_gem_context into either
>     i915_ppgtt or drm_i915_file_private depending on whether or not the
>     hardware has a full PPGTT.
> 
>  2. Move the delayed context destruction code into intel_context or a
>     per-engine wrapper struct rather than i915_gem_context.
> 
>  3. Get rid of the separation between context close and context destroy
> 
>  4. Get rid of the RCU on i915_gem_context
> 
> However, these should probably be done as a separate patch series as this
> one is already starting to get longish, especially if you consider the 89
> IGT patches that go along with it.
> 
> Test-with: 20210707210215.351483-1-jason@xxxxxxxxxxxxxx
> 
> Jason Ekstrand (30):
>   drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE
>   drm/i915: Stop storing the ring size in the ring pointer (v3)
>   drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP
>   drm/i915/gem: Set the watchdog timeout directly in
>     intel_context_set_gem (v2)
>   drm/i915/gem: Return void from context_apply_all
>   drm/i915: Drop the CONTEXT_CLONE API (v2)
>   drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)
>   drm/i915: Drop getparam support for I915_CONTEXT_PARAM_ENGINES
>   drm/i915/gem: Disallow bonding of virtual engines (v3)
>   drm/i915/gem: Remove engine auto-magic with FENCE_SUBMIT (v2)
>   drm/i915/request: Remove the hook from await_execution
>   drm/i915/gem: Disallow creating contexts with too many engines
>   drm/i915: Stop manually RCU banging in reset_stats_ioctl (v2)
>   drm/i915/gem: Add a separate validate_priority helper
>   drm/i915: Add gem/i915_gem_context.h to the docs
>   drm/i915/gem: Add an intermediate proto_context struct (v5)
>   drm/i915/gem: Rework error handling in default_engines
>   drm/i915/gem: Optionally set SSEU in intel_context_set_gem
>   drm/i915: Add an i915_gem_vm_lookup helper
>   drm/i915/gem: Make an alignment check more sensible
>   drm/i915/gem: Use the proto-context to handle create parameters (v5)
>   drm/i915/gem: Return an error ptr from context_lookup
>   drm/i915/gt: Drop i915_address_space::file (v2)
>   drm/i915/gem: Delay context creation (v3)
>   drm/i915/gem: Don't allow changing the VM on running contexts (v4)
>   drm/i915/gem: Don't allow changing the engine set on running contexts
>     (v3)
>   drm/i915/selftests: Take a VM in kernel_context()
>   i915/gem/selftests: Assign the VM at context creation in
>     igt_shared_ctx_exec
>   drm/i915/gem: Roll all of context creation together
>   drm/i915: Finalize contexts in GEM_CONTEXT_CREATE on version 13+

Applied everything, thanks a lot.

Now, could we bake all this hard-earned knowledge about how the uapi
actually works into some kerneldoc for the uapi header?

Thanks, Daniel

> 
>  Documentation/gpu/i915.rst                    |    2 +
>  drivers/gpu/drm/i915/Makefile                 |    1 -
>  drivers/gpu/drm/i915/gem/i915_gem_context.c   | 2926 ++++++++---------
>  drivers/gpu/drm/i915/gem/i915_gem_context.h   |    3 +
>  .../gpu/drm/i915/gem/i915_gem_context_types.h |  196 +-
>  .../gpu/drm/i915/gem/i915_gem_execbuffer.c    |   31 +-
>  .../drm/i915/gem/selftests/i915_gem_context.c |  127 +-
>  .../gpu/drm/i915/gem/selftests/mock_context.c |   67 +-
>  .../gpu/drm/i915/gem/selftests/mock_context.h |    4 +-
>  drivers/gpu/drm/i915/gt/intel_context.c       |    3 +-
>  drivers/gpu/drm/i915/gt/intel_context.h       |    5 -
>  drivers/gpu/drm/i915/gt/intel_context_param.c |   63 -
>  drivers/gpu/drm/i915/gt/intel_context_param.h |    6 +-
>  drivers/gpu/drm/i915/gt/intel_context_types.h |    1 +
>  drivers/gpu/drm/i915/gt/intel_engine_cs.c     |    3 +-
>  drivers/gpu/drm/i915/gt/intel_engine_types.h  |    7 -
>  .../drm/i915/gt/intel_execlists_submission.c  |  114 -
>  .../drm/i915/gt/intel_execlists_submission.h  |    8 +-
>  drivers/gpu/drm/i915/gt/intel_gtt.h           |   11 -
>  drivers/gpu/drm/i915/gt/intel_lrc.c           |    2 +-
>  drivers/gpu/drm/i915/gt/intel_migrate.c       |    3 +-
>  drivers/gpu/drm/i915/gt/selftest_execlists.c  |  251 +-
>  drivers/gpu/drm/i915/gt/selftest_hangcheck.c  |    2 +-
>  drivers/gpu/drm/i915/gt/selftest_mocs.c       |    2 +-
>  drivers/gpu/drm/i915/gt/selftest_timeline.c   |    2 +-
>  drivers/gpu/drm/i915/gvt/scheduler.c          |    7 +-
>  drivers/gpu/drm/i915/i915_drv.h               |   82 +-
>  drivers/gpu/drm/i915/i915_perf.c              |    4 +-
>  drivers/gpu/drm/i915/i915_request.c           |   42 +-
>  drivers/gpu/drm/i915/i915_request.h           |    4 +-
>  .../drm/i915/selftests/i915_mock_selftests.h  |    1 -
>  drivers/gpu/drm/i915/selftests/mock_gtt.c     |    1 -
>  include/uapi/drm/i915_drm.h                   |   40 +-
>  33 files changed, 1681 insertions(+), 2340 deletions(-)
>  delete mode 100644 drivers/gpu/drm/i915/gt/intel_context_param.c
> 
> -- 
> 2.31.1
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux