On Thu, 08 Jul 2021, "Kulkarni, Vandita" <vandita.kulkarni@xxxxxxxxx> wrote:
>> -----Original Message-----
>> From: Nikula, Jani <jani.nikula@xxxxxxxxx>
>> Sent: Thursday, July 8, 2021 6:44 PM
>> To: Kulkarni, Vandita <vandita.kulkarni@xxxxxxxxx>; intel-
>> gfx@xxxxxxxxxxxxxxxxxxxxx
>> Cc: Kulkarni, Vandita <vandita.kulkarni@xxxxxxxxx>
>> Subject: Re: [v7 3/3] drm/i915/display/dsc: Force dsc BPP
>>
>> On Thu, 08 Jul 2021, Jani Nikula <jani.nikula@xxxxxxxxx> wrote:
>> > On Thu, 08 Jul 2021, Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx> wrote:
>> >> Set DSC BPP to the value forced through debugfs. It can go from bpc
>> >> to bpp-1.
>> >>
>> >> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
>> >> ---
>> >> drivers/gpu/drm/i915/display/intel_dp.c | 17 +++++++++++++++++
>> >> 1 file changed, 17 insertions(+)
>> >>
>> >> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
>> >> b/drivers/gpu/drm/i915/display/intel_dp.c
>> >> index 5b52beaddada..3e50cdd7e448 100644
>> >> --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> >> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> >> @@ -1240,6 +1240,23 @@ static int intel_dp_dsc_compute_config(struct
>> intel_dp *intel_dp,
>> >> pipe_config->port_clock = intel_dp->common_rates[limits-
>> >max_clock];
>> >> pipe_config->lane_count = limits->max_lane_count;
>> >>
>> >> + if (intel_dp->force_dsc_en) {
>>
>> Oh, this should check for intel_dp->force_dsc_bpp. We don't want to always
>> force the bpp when we force dsc enable.
> Okay will fix this.
> And I was returning -EINVAL , to fail the test on setting invalid BPP.
Okay, if it makes the test easier, I guess it's fine. Up to you.
BR,
Jani.
>
>>
>> >> + /* As of today we support DSC for only RGB */
>> >> + if (intel_dp->force_dsc_bpp >= 8 &&
>> >> + intel_dp->force_dsc_bpp < pipe_bpp) {
>> >> + drm_dbg_kms(&dev_priv->drm,
>> >> + "DSC BPP forced to %d",
>> >> + intel_dp->force_dsc_bpp);
>> >> + pipe_config->dsc.compressed_bpp =
>> >> + intel_dp->force_dsc_bpp;
>> >> + } else {
>> >> + drm_dbg_kms(&dev_priv->drm,
>> >> + "Invalid DSC BPP %d",
>> >> + intel_dp->force_dsc_bpp);
>> >> + return -EINVAL;
>> >
>> > I'd just let it use the normal compressed_bpp, with the debug message,
>> > instead of returning -EINVAL.
>> >
>> >> + }
>> >> + }
>> >> +
>> >
>> > This should be *after* the below blocks, because otherwise
>> > compressed_bpp will be overridden by the normal case, not by the force
>> > case!
>> >
>> > BR,
>> > Jani.
>> >
>> >> if (intel_dp_is_edp(intel_dp)) {
>> >> pipe_config->dsc.compressed_bpp =
>> >> min_t(u16,
>> drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4,
>>
>> --
>> Jani Nikula, Intel Open Source Graphics Center
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
