Re: [v7 2/3] drm/i915/display/dsc: Add Per connector debugfs node for DSC BPP enable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 08 Jul 2021, Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx> wrote:
> From: Patnana Venkata Sai <venkata.sai.patnana@xxxxxxxxx>
>
> [What]:
> This patch creates a per connector debugfs node to expose
> the Input and Compressed BPP.
>
> The same node can be used from userspace to force
> DSC to a certain BPP(all accepted values).
>
> [Why]:
> Useful to verify all supported/requested compression bpp's
> through IGT
>
> v2: Remove unnecessary logic (Jani)
> v3: Drop pipe bpp in debugfs node (Vandita)
> v4: Minor cleanups (Vandita)
> v5: Fix NULL pointer dereference
> v6: Fix dim tool checkpatch errors
>     Release the lock before return (Vandita)
> v7: Rename to file to dsc_bpp, remove unwanted
>     dsc bpp range check from v6, permissions (Jani)
>
> Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
> Cc: Navare Manasi D <manasi.d.navare@xxxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
> Signed-off-by: Patnana Venkata Sai <venkata.sai.patnana@xxxxxxxxx>
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>

If this works, I think it's good enough for now. I think there's more
overall cleanup to be done in the file, but should not block this one.

BR,
Jani.


> ---
>  .../drm/i915/display/intel_display_debugfs.c  | 76 ++++++++++++++++++-
>  .../drm/i915/display/intel_display_types.h    |  1 +
>  2 files changed, 76 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> index 942c4419e0cb..351ada944b1e 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> @@ -2389,6 +2389,73 @@ static const struct file_operations i915_dsc_fec_support_fops = {
>  	.write = i915_dsc_fec_support_write
>  };
>  
> +static int i915_dsc_bpp_show(struct seq_file *m, void *data)
> +{
> +	struct drm_connector *connector = m->private;
> +	struct drm_device *dev = connector->dev;
> +	struct drm_crtc *crtc;
> +	struct intel_crtc_state *crtc_state;
> +	struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector));
> +	int ret;
> +
> +	if (!encoder)
> +		return -ENODEV;
> +
> +	ret = drm_modeset_lock_single_interruptible(&dev->mode_config.connection_mutex);
> +	if (ret)
> +		return ret;
> +
> +	crtc = connector->state->crtc;
> +	if (connector->status != connector_status_connected || !crtc) {
> +		ret = -ENODEV;
> +		goto out;
> +	}
> +
> +	crtc_state = to_intel_crtc_state(crtc->state);
> +	seq_printf(m, "Compressed_BPP: %d\n", crtc_state->dsc.compressed_bpp);
> +
> +out:	drm_modeset_unlock(&dev->mode_config.connection_mutex);
> +
> +	return ret;
> +}
> +
> +static ssize_t i915_dsc_bpp_write(struct file *file,
> +				  const char __user *ubuf,
> +				  size_t len, loff_t *offp)
> +{
> +	struct drm_connector *connector =
> +		((struct seq_file *)file->private_data)->private;
> +	struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector));
> +	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> +	int dsc_bpp = 0;
> +	int ret;
> +
> +	ret = kstrtoint_from_user(ubuf, len, 0, &dsc_bpp);
> +	if (ret < 0)
> +		return ret;
> +
> +	intel_dp->force_dsc_bpp = dsc_bpp;
> +	*offp += len;
> +
> +	return len;
> +}
> +
> +static int i915_dsc_bpp_open(struct inode *inode,
> +			     struct file *file)
> +{
> +	return single_open(file, i915_dsc_bpp_show,
> +			   inode->i_private);
> +}
> +
> +static const struct file_operations i915_dsc_bpp_fops = {
> +	.owner = THIS_MODULE,
> +	.open = i915_dsc_bpp_open,
> +	.read = seq_read,
> +	.llseek = seq_lseek,
> +	.release = single_release,
> +	.write = i915_dsc_bpp_write
> +};
> +
>  /**
>   * intel_connector_debugfs_add - add i915 specific connector debugfs files
>   * @connector: pointer to a registered drm_connector
> @@ -2427,10 +2494,17 @@ int intel_connector_debugfs_add(struct drm_connector *connector)
>  				    connector, &i915_hdcp_sink_capability_fops);
>  	}
>  
> -	if ((DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) && ((connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort && !to_intel_connector(connector)->mst_port) || connector->connector_type == DRM_MODE_CONNECTOR_eDP))
> +	if ((DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) &&
> +	    ((connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
> +	    !to_intel_connector(connector)->mst_port) ||
> +	    connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
>  		debugfs_create_file("i915_dsc_fec_support", 0644, root,
>  				    connector, &i915_dsc_fec_support_fops);
>  
> +		debugfs_create_file("i915_dsc_bpp", 0644, root,
> +				    connector, &i915_dsc_bpp_fops);
> +	}
> +
>  	/* Legacy panels doesn't lpsp on any platform */
>  	if ((DISPLAY_VER(dev_priv) >= 9 || IS_HASWELL(dev_priv) ||
>  	     IS_BROADWELL(dev_priv)) &&
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index d94f361b548b..19d8d3eefbc2 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1612,6 +1612,7 @@ struct intel_dp {
>  
>  	/* Display stream compression testing */
>  	bool force_dsc_en;
> +	int force_dsc_bpp;
>  
>  	bool hobl_failed;
>  	bool hobl_active;

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux