> -----Original Message-----
> From: Patnana, Venkata Sai <venkata.sai.patnana@xxxxxxxxx>
> Sent: Friday, June 25, 2021 3:39 PM
> To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Patnana, Venkata Sai <venkata.sai.patnana@xxxxxxxxx>; Srivatsa, Anusha
> <anusha.srivatsa@xxxxxxxxx>; Kulkarni, Vandita
> <vandita.kulkarni@xxxxxxxxx>; Navare, Manasi D
> <manasi.d.navare@xxxxxxxxx>
> Subject: [PATCH 2/2] drm/i915/display/dsc: Set BPP in the kernel
>
> From: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
>
> Set compress BPP in kernel while connector DP or eDP
>
> Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
> Cc: Navare Manasi D <manasi.d.navare@xxxxxxxxx>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
> Signed-off-by: Patnana Venkata Sai <venkata.sai.patnana@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 23 ++++++++++++++++++-----
> 1 file changed, 18 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index f74f70691247b..a454ee4210866 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -1241,9 +1241,15 @@ static int intel_dp_dsc_compute_config(struct
> intel_dp *intel_dp,
> pipe_config->lane_count = limits->max_lane_count;
>
> if (intel_dp_is_edp(intel_dp)) {
> - pipe_config->dsc.compressed_bpp =
> - min_t(u16,
> drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4,
> - pipe_config->pipe_bpp);
> + if (intel_dp->force_dsc_bpp) {
> + drm_dbg_kms(&dev_priv->drm,
> + "DSC BPC forced to %d", intel_dp-
> >force_dsc_bpp);
Should be DSC BPP.
> + pipe_config->dsc.compressed_bpp = intel_dp-
> >force_dsc_bpp;
> + } else {
> + pipe_config->dsc.compressed_bpp =
> + min_t(u16,
> drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4,
> + pipe_config->pipe_bpp);
> + }
> pipe_config->dsc.slice_count =
> drm_dp_dsc_sink_max_slice_count(intel_dp-
> >dsc_dpcd,
> true);
> @@ -1269,9 +1275,15 @@ static int intel_dp_dsc_compute_config(struct
> intel_dp *intel_dp,
> "Compressed BPP/Slice Count not
> supported\n");
> return -EINVAL;
> }
> - pipe_config->dsc.compressed_bpp = min_t(u16,
> + if (intel_dp->force_dsc_bpp) {
> + drm_dbg_kms(&dev_priv->drm,
> + "DSC BPC forced to %d\n", intel_dp-
> >force_dsc_bpp);
Same as above.
> + pipe_config->dsc.compressed_bpp = intel_dp-
> >force_dsc_bpp;
> + } else {
> + pipe_config->dsc.compressed_bpp = min_t(u16,
>
> dsc_max_output_bpp >> 4,
> pipe_config-
> >pipe_bpp);
> + }
> pipe_config->dsc.slice_count = dsc_dp_slice_count;
> }
> /*
> @@ -1374,7 +1386,8 @@ intel_dp_compute_link_config(struct
> intel_encoder *encoder,
> * Pipe joiner needs compression upto display12 due to BW
> limitation. DG2
> * onwards pipe joiner can be enabled without compression.
> */
> - drm_dbg_kms(&i915->drm, "Force DSC en = %d\n", intel_dp-
> >force_dsc_en);
> + drm_dbg_kms(&i915->drm, "Force DSC en = %d\n Force DSC BPP =
> %d\n",
> + intel_dp->force_dsc_en, intel_dp->force_dsc_bpp);
> if (ret || intel_dp->force_dsc_en || (DISPLAY_VER(i915) < 13 &&
> pipe_config->bigjoiner)) {
> ret = intel_dp_dsc_compute_config(intel_dp, pipe_config,
> --
> 2.25.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
