XE_LPD continues to use the same "skylake-style" watermark
programming as other recent platforms. The only change to the watermark
calculations compared to Display12 is that XE_LPD now allows a
maximum of 255 lines vs the old limit of 31.
Due to the larger possible lines value, the corresponding bits
representing the value in PLANE_WM are also extended, so make sure we
read/write enough bits. Let's also take this opportunity to switch over
to the REG_FIELD notation.
Bspec: 49325
Bspec: 50419
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Anshuman Gupta <anshuman.gupta@xxxxxxxxx>
Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 3 +--
drivers/gpu/drm/i915/intel_pm.c | 15 +++++++++++----
2 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e070f2df6a87..0f6aa3502f1f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6442,8 +6442,7 @@ enum {
#define _CUR_WM_TRANS_B_0 0x71168
#define PLANE_WM_EN (1 << 31)
#define PLANE_WM_IGNORE_LINES (1 << 30)
-#define PLANE_WM_LINES_SHIFT 14
-#define PLANE_WM_LINES_MASK 0x1f
+#define PLANE_WM_LINES_MASK REG_GENMASK(21, 14)
#define PLANE_WM_BLOCKS_MASK 0x7ff /* skl+: 10 bits, icl+ 11 bits */
#define _CUR_WM_0(pipe) _PIPE(pipe, _CUR_WM_A_0, _CUR_WM_B_0)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 06d5b7cc8b62..ef2d1fa60f04 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5185,6 +5185,14 @@ static bool skl_wm_has_lines(struct drm_i915_private *dev_priv, int level)
return level > 0;
}
+static int skl_wm_max_lines(struct drm_i915_private *dev_priv)
+{
+ if (DISPLAY_VER(dev_priv) >= 13)
+ return 255;
+ else
+ return 31;
+}
+
static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
int level,
unsigned int latency,
@@ -5289,7 +5297,7 @@ static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
if (!skl_wm_has_lines(dev_priv, level))
lines = 0;
- if (lines > 31) {
+ if (lines > skl_wm_max_lines(dev_priv)) {
/* reject it */
result->min_ddb_alloc = U16_MAX;
return;
@@ -5585,7 +5593,7 @@ static void skl_write_wm_level(struct drm_i915_private *dev_priv,
if (level->ignore_lines)
val |= PLANE_WM_IGNORE_LINES;
val |= level->blocks;
- val |= level->lines << PLANE_WM_LINES_SHIFT;
+ val |= REG_FIELD_PREP(PLANE_WM_LINES_MASK, level->lines);
intel_de_write_fw(dev_priv, reg, val);
}
@@ -6193,8 +6201,7 @@ static void skl_wm_level_from_reg_val(u32 val, struct skl_wm_level *level)
level->enable = val & PLANE_WM_EN;
level->ignore_lines = val & PLANE_WM_IGNORE_LINES;
level->blocks = val & PLANE_WM_BLOCKS_MASK;
- level->lines = (val >> PLANE_WM_LINES_SHIFT) &
- PLANE_WM_LINES_MASK;
+ level->lines = REG_FIELD_GET(PLANE_WM_LINES_MASK, val);
}
void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
--
2.25.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
