On Tue, Apr 13, 2021 at 04:11:29PM +0200, Daniel Vetter wrote:
> On Tue, Apr 13, 2021 at 02:56:02PM +0300, Pekka Paalanen wrote:
> > On Tue, 13 Apr 2021 11:49:03 +0200
> > Daniel Vetter <daniel.vetter@xxxxxxxx> wrote:
> >
> > > It's very confusing for userspace to have to deal with inconsistencies
> > > here, and some drivers screwed this up a bit. Most just ommitted the
> > > format list when they meant to say that only linear modifier is
> > > allowed, but some also meant that only implied modifiers are
> > > acceptable (because actually none of the planes registered supported
> > > modifiers).
> > >
> > > Now that this is all done consistently across all drivers, document
> > > the rules and enforce it in the drm core.
> > >
> > > Cc: Pekka Paalanen <pekka.paalanen@xxxxxxxxxxxxx>
> > > Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> > > Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > > Cc: Maxime Ripard <mripard@xxxxxxxxxx>
> > > Cc: Thomas Zimmermann <tzimmermann@xxxxxxx>
> > > Cc: David Airlie <airlied@xxxxxxxx>
> > > Cc: Daniel Vetter <daniel@xxxxxxxx>
> > > ---
> > > drivers/gpu/drm/drm_plane.c | 16 +++++++++++++++-
> > > include/drm/drm_mode_config.h | 2 ++
> > > 2 files changed, 17 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
> > > index 0dd43882fe7c..16a7e3e57f7f 100644
> > > --- a/drivers/gpu/drm/drm_plane.c
> > > +++ b/drivers/gpu/drm/drm_plane.c
> > > @@ -128,6 +128,11 @@
> > > * pairs supported by this plane. The blob is a struct
> > > * drm_format_modifier_blob. Without this property the plane doesn't
> > > * support buffers with modifiers. Userspace cannot change this property.
> > > + *
> > > + * Note that userspace can check the DRM_CAP_ADDFB2_MODIFIERS driver
> > > + * capability for general modifier support. If this flag is set then every
> > > + * plane will have the IN_FORMATS property, even when it only supports
> > > + * DRM_FORMAT_MOD_LINEAR.
> >
> > Ooh, that's even better. But isn't that changing the meaning of the
> > cap? Isn't the cap older than IN_FORMATS?
>
> Hm indeed. But also how exactly are you going to user modifiers without
> IN_FORMATS ... it's a bit hard. I think this is all because we've enabled
> modifiers piece-by-piece and never across the entire thing (e.g. with
> compositor and protocols), so the missing pieces only became apparent
> later on.
Ok I worked git log -Gallow_fb_modifiers and there's 3 drivers which
enabled modifiers before IN_FORMATS was merged:
- i915
- msm/mdp4 (for the tiled NV12 format thing)
- tegra
> I'm not sure whether compositors really want to support this, I guess
> worst case we could disable the cap on these old kernels.
>
> > What about the opposite? Is it allowed to have even a single IN_FORMATS
> > if you don't have the cap?
>
> That direction is enforced since 5.1, because some drivers screwed it up
> and confusion in userspace ensued.
>
> Should I add a bug that on kernels older than 5.1 the situation is more
> murky and there's lots of bugs?
I guess we should recommend to userspace that if they spot an
inconsistency between IN_FORMATS across planes and the cap then maybe they
want to disable modifier support because it might be all kinds of broken?
-Daniel
>
> >
> > > */
> > >
> > > static unsigned int drm_num_planes(struct drm_device *dev)
> > > @@ -277,8 +282,14 @@ static int __drm_universal_plane_init(struct drm_device *dev,
> > > format_modifier_count++;
> > > }
> > >
> > > - if (format_modifier_count)
> > > + /* autoset the cap and check for consistency across all planes */
> > > + if (format_modifier_count) {
> > > + WARN_ON(!config->allow_fb_modifiers &&
> > > + !list_empty(&config->plane_list));
> >
> > What does this mean?
>
> If allow_fb_modifiers isn't set yet (we do that in the line below) and we
> are _not_ the first plane that gets added to the driver (that's done
> towards the end of the function) then that means there's already a plane
> registered without modifiers and hence IN_FORMAT. Which we then warn
> about.
>
> >
> > > config->allow_fb_modifiers = true;
> > > + } else {
> > > + WARN_ON(config->allow_fb_modifiers);
>
> This warning here checks the other case of an earlier plane with
> modifiers, but the one we're adding now doesn't have them.
> -Daniel
>
> > > + }
> > >
> > > plane->modifier_count = format_modifier_count;
> > > plane->modifiers = kmalloc_array(format_modifier_count,
> > > @@ -360,6 +371,9 @@ static int __drm_universal_plane_init(struct drm_device *dev,
> > > * drm_universal_plane_init() to let the DRM managed resource infrastructure
> > > * take care of cleanup and deallocation.
> > > *
> > > + * Drivers supporting modifiers must set @format_modifiers on all their planes,
> > > + * even those that only support DRM_FORMAT_MOD_LINEAR.
> >
> > Good.
> >
> > > + *
> > > * Returns:
> > > * Zero on success, error code on failure.
> > > */
> > > diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> > > index ab424ddd7665..1ddf7783fdf7 100644
> > > --- a/include/drm/drm_mode_config.h
> > > +++ b/include/drm/drm_mode_config.h
> > > @@ -909,6 +909,8 @@ struct drm_mode_config {
> > > * @allow_fb_modifiers:
> > > *
> > > * Whether the driver supports fb modifiers in the ADDFB2.1 ioctl call.
> > > + * Note that drivers should not set this directly, it is automatically
> > > + * set in drm_universal_plane_init().
> > > *
> > > * IMPORTANT:
> > > *
> >
> > Thanks,
> > pq
>
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
