On Thu, Mar 18, 2021 at 07:49:13PM +0200, Imre Deak wrote: > On Thu, Mar 18, 2021 at 07:33:20PM +0200, Ville Syrjälä wrote: > > On Wed, Mar 17, 2021 at 08:48:59PM +0200, Imre Deak wrote: > > > The spec requires to use at least 3.2ms for the AUX timeout period if > > > there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming > > > spec update makes this more specific, by requiring a 3.2ms minimum > > > timeout period for the LTTPR detection reading the 0xF0000-0xF0007 > > > range (3.6.5.1). > > > > I'm pondering if we could reduce the timeout after having determined > > wherther LTTPRs are present or not? But maybe that wouldn't really speed > > up anything since we can't reduce the timeout until after detecting > > *something*. And once there is something there we shouldn't really get > > any more timeouts I guess. So probably a totally stupid idea. > > Right, if something is connected it would take anyway as much time as it > takes for the sink to reply whether or not we decreased the timeout. > > However if nothing is connected, we have the excessive timeout Khaled > already noticed (160 * 4ms = 6.4 sec on ICL+). I think to improve that > we could scale the total number of retries by making it > total_timeout/platform_specific_timeout (letting total_timeout=2sec for > instance) or just changing the drm retry logic to be time based instead > of the number of retries we use atm. Doh, reducing simply the HW timeouts would be enough to fix this. > > Anyways, this seems about the only thing we can do given the limited > > hw capabilities. > > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > > > > Accordingly disable LTTPR detection until GLK, where the maximum timeout > > > we can set is only 1.6ms. > > > > > > Link training in the non-transparent mode is known to fail at least on > > > some SKL systems with a WD19 dock on the link, which exposes an LTTPR > > > (see the References below). While this could have different reasons > > > besides the too short AUX timeout used, not detecting LTTPRs (and so not > > > using the non-transparent LT mode) fixes link training on these systems. > > > > > > While at it add a code comment about the platform specific maximum > > > timeout values. > > > > > > v2: Add a comment about the g4x maximum timeout as well. (Ville) > > > > > > Reported-by: Takashi Iwai <tiwai@xxxxxxx> > > > Reported-and-tested-by: Santiago Zarate <santiago.zarate@xxxxxxxx> > > > Reported-and-tested-by: Bodo Graumann <mail@xxxxxxxxxxxxxxx> > > > References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166 > > > Fixes: b30edfd8d0b4 ("drm/i915: Switch to LTTPR non-transparent mode link training") > > > Cc: <stable@xxxxxxxxxxxxxxx> # v5.11 > > > Cc: Takashi Iwai <tiwai@xxxxxxx> > > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx> > > > --- > > > drivers/gpu/drm/i915/display/intel_dp_aux.c | 7 +++++++ > > > .../gpu/drm/i915/display/intel_dp_link_training.c | 15 ++++++++++++--- > > > 2 files changed, 19 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux.c b/drivers/gpu/drm/i915/display/intel_dp_aux.c > > > index eaebf123310a..10fe17b7280d 100644 > > > --- a/drivers/gpu/drm/i915/display/intel_dp_aux.c > > > +++ b/drivers/gpu/drm/i915/display/intel_dp_aux.c > > > @@ -133,6 +133,7 @@ static u32 g4x_get_aux_send_ctl(struct intel_dp *intel_dp, > > > else > > > precharge = 5; > > > > > > + /* Max timeout value on G4x-BDW: 1.6ms */ > > > if (IS_BROADWELL(dev_priv)) > > > timeout = DP_AUX_CH_CTL_TIME_OUT_600us; > > > else > > > @@ -159,6 +160,12 @@ static u32 skl_get_aux_send_ctl(struct intel_dp *intel_dp, > > > enum phy phy = intel_port_to_phy(i915, dig_port->base.port); > > > u32 ret; > > > > > > + /* > > > + * Max timeout values: > > > + * SKL-GLK: 1.6ms > > > + * CNL: 3.2ms > > > + * ICL+: 4ms > > > + */ > > > ret = DP_AUX_CH_CTL_SEND_BUSY | > > > DP_AUX_CH_CTL_DONE | > > > DP_AUX_CH_CTL_INTERRUPT | > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c > > > index 19ba7c7cbaab..c0e25c75c105 100644 > > > --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c > > > +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c > > > @@ -82,6 +82,18 @@ static void intel_dp_read_lttpr_phy_caps(struct intel_dp *intel_dp, > > > > > > static bool intel_dp_read_lttpr_common_caps(struct intel_dp *intel_dp) > > > { > > > + struct drm_i915_private *i915 = dp_to_i915(intel_dp); > > > + > > > + if (intel_dp_is_edp(intel_dp)) > > > + return false; > > > + > > > + /* > > > + * Detecting LTTPRs must be avoided on platforms with an AUX timeout > > > + * period < 3.2ms. (see DP Standard v2.0, 2.11.2, 3.6.6.1). > > > + */ > > > + if (INTEL_GEN(i915) < 10) > > > + return false; > > > + > > > if (drm_dp_read_lttpr_common_caps(&intel_dp->aux, > > > intel_dp->lttpr_common_caps) < 0) { > > > memset(intel_dp->lttpr_common_caps, 0, > > > @@ -127,9 +139,6 @@ int intel_dp_lttpr_init(struct intel_dp *intel_dp) > > > bool ret; > > > int i; > > > > > > - if (intel_dp_is_edp(intel_dp)) > > > - return 0; > > > - > > > ret = intel_dp_read_lttpr_common_caps(intel_dp); > > > if (!ret) > > > return 0; > > > -- > > > 2.25.1 > > > > -- > > Ville Syrjälä > > Intel _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
