On Thu, Mar 11, 2021 at 12:17:30AM +0200, Imre Deak wrote:
> Factor out to a new function the logic to calculate the FB remapping
> parameters both during creating the FB and when flipping to it.
>
> Add a new intel_fb_plane_remap_info() that can be used by a new remapped
> view set up when creating the FB in a follow up patch.
>
> Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> ---
> .../drm/i915/display/intel_display_types.h | 10 +-
> drivers/gpu/drm/i915/display/intel_fb.c | 210 ++++++++----------
> 2 files changed, 93 insertions(+), 127 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 65159a1ea7dd..fc02eca45e4d 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -85,6 +85,11 @@ enum intel_broadcast_rgb {
> INTEL_BROADCAST_RGB_LIMITED,
> };
>
> +struct intel_fb_plane_remap_info {
> + unsigned int x, y;
> + unsigned int pitch; /* pixels */
> +};
> +
> struct intel_framebuffer {
> struct drm_framebuffer base;
> struct intel_frontbuffer *frontbuffer;
> @@ -95,10 +100,7 @@ struct intel_framebuffer {
> unsigned int x, y;
> } normal[4];
> /* for each plane in the rotated GTT view for no-CCS formats */
> - struct {
> - unsigned int x, y;
> - unsigned int pitch; /* pixels */
> - } rotated[2];
> + struct intel_fb_plane_remap_info rotated[2];
> };
>
> struct intel_fbdev {
> diff --git a/drivers/gpu/drm/i915/display/intel_fb.c b/drivers/gpu/drm/i915/display/intel_fb.c
> index f661b21b119d..16a1b5c922bb 100644
> --- a/drivers/gpu/drm/i915/display/intel_fb.c
> +++ b/drivers/gpu/drm/i915/display/intel_fb.c
> @@ -9,6 +9,8 @@
> #include "display/intel_display_types.h"
> #include "display/intel_fb.h"
>
> +#define check_array_bounds(i915, a, i) drm_WARN_ON(&i915->drm, i >= ARRAY_SIZE(a))
> +
> bool is_ccs_plane(const struct drm_framebuffer *fb, int plane)
> {
> if (!is_ccs_modifier(fb->modifier))
> @@ -574,66 +576,6 @@ static u32 calc_plane_aligned_offset(const struct intel_framebuffer *fb, int col
> return offset / tile_size;
> }
>
> -/*
> - * Setup the rotated view for an FB plane and return the size the GTT mapping
> - * requires for this view.
> - */
> -static u32 setup_fb_rotation(int plane, const struct intel_remapped_plane_info *plane_info,
> - u32 gtt_offset_rotated, int x, int y,
> - unsigned int width, unsigned int height,
> - unsigned int tile_size,
> - unsigned int tile_width, unsigned int tile_height,
> - struct drm_framebuffer *fb)
> -{
> - struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
> - struct intel_rotation_info *rot_info = &intel_fb->rot_info;
> - unsigned int pitch_tiles;
> - struct drm_rect r;
> -
> - /* Y or Yf modifiers required for 90/270 rotation */
> - if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
> - fb->modifier != I915_FORMAT_MOD_Yf_TILED)
> - return 0;
> -
> - if (drm_WARN_ON(fb->dev, plane >= ARRAY_SIZE(rot_info->plane)))
> - return 0;
> -
> - rot_info->plane[plane] = *plane_info;
> -
> - intel_fb->rotated[plane].pitch = plane_info->height * tile_height;
> -
> - /* rotate the x/y offsets to match the GTT view */
> - drm_rect_init(&r, x, y, width, height);
> - drm_rect_rotate(&r,
> - plane_info->width * tile_width,
> - plane_info->height * tile_height,
> - DRM_MODE_ROTATE_270);
> - x = r.x1;
> - y = r.y1;
> -
> - /* rotate the tile dimensions to match the GTT view */
> - pitch_tiles = intel_fb->rotated[plane].pitch / tile_height;
> - swap(tile_width, tile_height);
> -
> - /*
> - * We only keep the x/y offsets, so push all of the
> - * gtt offset into the x/y offsets.
> - */
> - intel_adjust_tile_offset(&x, &y,
> - tile_width, tile_height,
> - tile_size, pitch_tiles,
> - gtt_offset_rotated * tile_size, 0);
> -
> - /*
> - * First pixel of the framebuffer from
> - * the start of the rotated gtt mapping.
> - */
> - intel_fb->rotated[plane].x = x;
> - intel_fb->rotated[plane].y = y;
> -
> - return plane_info->width * plane_info->height;
> -}
> -
> struct fb_plane_view_dims {
> unsigned int width, height;
> unsigned int tile_width, tile_height;
> @@ -665,6 +607,66 @@ static unsigned int plane_view_tile_rows(const struct intel_framebuffer *fb, int
> return DIV_ROUND_UP(y + dims->height, dims->tile_height);
> }
>
> +static u32 calc_plane_remap_info(const struct intel_framebuffer *fb, int color_plane,
> + const struct fb_plane_view_dims *dims,
> + enum i915_ggtt_view_type view_type,
> + u32 obj_offset, u32 gtt_offset, int x, int y,
> + struct intel_remapped_plane_info *gtt_remap_info,
> + struct intel_fb_plane_remap_info *plane_remap_info)
> +{
> + const struct drm_framebuffer *drm_fb = &fb->base;
> + struct drm_i915_private *i915 = to_i915(drm_fb->dev);
> + unsigned int tile_width = dims->tile_width;
> + unsigned int tile_height = dims->tile_height;
> + unsigned int tile_size = intel_tile_size(i915);
> + unsigned int pitch_tiles;
> + struct drm_rect r;
> +
> + gtt_remap_info->offset = obj_offset;
> + gtt_remap_info->width = DIV_ROUND_UP(x + dims->width, dims->tile_width);
> + gtt_remap_info->height = plane_view_tile_rows(fb, color_plane, dims, y);
> + gtt_remap_info->stride = plane_view_stride_tiles(fb, color_plane, dims);
I would keep offset and stride next to each other like in the other place
since they are both related to the actual backing memory, whereas
width+height are the size of the view.
> +
> + if (view_type == I915_GGTT_VIEW_ROTATED) {
> + /* rotate the x/y offsets to match the GTT view */
> + drm_rect_init(&r, x, y, dims->width, dims->height);
> + drm_rect_rotate(&r,
> + gtt_remap_info->width * tile_width,
> + gtt_remap_info->height * tile_height,
> + DRM_MODE_ROTATE_270);
> +
> + plane_remap_info->x = r.x1;
> + plane_remap_info->y = r.y1;
> +
> + pitch_tiles = gtt_remap_info->height;
> + plane_remap_info->pitch = pitch_tiles * tile_height;
> + /* rotate the tile dimensions to match the GTT view */
> + swap(tile_width, tile_height);
> + } else {
> + drm_WARN_ON(&i915->drm, view_type != I915_GGTT_VIEW_REMAPPED);
> +
> + plane_remap_info->x = x;
> + plane_remap_info->y = y;
> +
> + pitch_tiles = gtt_remap_info->width;
> + plane_remap_info->pitch = pitch_tiles * tile_width * drm_fb->format->cpp[color_plane];
> + }
> +
> + /*
> + * We only keep the x/y offsets, so push all of the
> + * gtt offset into the x/y offsets.
> + * x,y will hold the first pixel of the framebuffer
> + * plane from the start of the remapped/rotated gtt
> + * mapping.
> + */
> + intel_adjust_tile_offset(&plane_remap_info->x, &plane_remap_info->y,
> + tile_width, tile_height,
> + tile_size, pitch_tiles,
> + gtt_offset * tile_size, 0);
> +
> + return gtt_remap_info->width * gtt_remap_info->height;
> +}
> +
> static int calc_plane_normal_size(const struct intel_framebuffer *fb, int color_plane,
> const struct fb_plane_view_dims *dims,
> int x, int y)
> @@ -734,21 +736,17 @@ int intel_fill_fb_info(struct drm_i915_private *i915, struct drm_framebuffer *fb
>
> offset = calc_plane_aligned_offset(intel_fb, i, &x, &y);
>
> - if (!is_surface_linear(fb, i)) {
> - struct intel_remapped_plane_info plane_info;
> + /* Y or Yf modifiers required for 90/270 rotation */
> + if (fb->modifier == I915_FORMAT_MOD_Y_TILED ||
> + fb->modifier == I915_FORMAT_MOD_Yf_TILED) {
Was confused for a bit that we'd now go into this stuff with
tgl+ ccs, but then remembered that those have a dedicated modifier.
> + check_array_bounds(i915, intel_fb->rot_info.plane, i);
> + check_array_bounds(i915, intel_fb->rotated, i);
>
> - plane_info.offset = offset;
> - plane_info.stride = plane_view_stride_tiles(intel_fb, i, &view_dims);
> - plane_info.width = DIV_ROUND_UP(x + width, view_dims.tile_width);
> - plane_info.height = plane_view_tile_rows(intel_fb, i, &view_dims, y);
> -
> - gtt_offset_rotated +=
> - setup_fb_rotation(i, &plane_info,
> - gtt_offset_rotated,
> - x, y, width, height,
> - tile_size,
> - view_dims.tile_width, view_dims.tile_height,
> - fb);
> + gtt_offset_rotated += calc_plane_remap_info(intel_fb, i, &view_dims,
> + I915_GGTT_VIEW_ROTATED,
> + offset, gtt_offset_rotated, x, y,
> + &intel_fb->rot_info.plane[i],
> + &intel_fb->rotated[i]);
> }
>
> size = calc_plane_normal_size(intel_fb, i, &view_dims, x, y);
> @@ -772,10 +770,8 @@ static void intel_plane_remap_gtt(struct intel_plane_state *plane_state)
> to_i915(plane_state->uapi.plane->dev);
> struct drm_framebuffer *fb = plane_state->hw.fb;
> struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
> - struct intel_rotation_info *info = &plane_state->view.rotated;
> unsigned int rotation = plane_state->hw.rotation;
> int i, num_planes = fb->format->num_planes;
> - unsigned int tile_size = intel_tile_size(i915);
> unsigned int src_x, src_y;
> unsigned int src_w, src_h;
> u32 gtt_offset = 0;
> @@ -804,20 +800,19 @@ static void intel_plane_remap_gtt(struct intel_plane_state *plane_state)
> for (i = 0; i < num_planes; i++) {
> unsigned int hsub = i ? fb->format->hsub : 1;
> unsigned int vsub = i ? fb->format->vsub : 1;
> - unsigned int cpp = fb->format->cpp[i];
> - unsigned int tile_width, tile_height;
> + struct intel_fb_plane_remap_info plane_remap_info;
> + struct fb_plane_view_dims view_dims;
> unsigned int width, height;
> - unsigned int pitch_tiles;
> unsigned int x, y;
> u32 offset;
>
> - intel_tile_dims(fb, i, &tile_width, &tile_height);
> -
> x = src_x / hsub;
> y = src_y / vsub;
> width = src_w / hsub;
> height = src_h / vsub;
>
> + init_plane_view_dims(intel_fb, i, width, height, &view_dims);
> +
> /*
> * First pixel of the src viewport from the
> * start of the normal gtt mapping.
> @@ -827,49 +822,18 @@ static void intel_plane_remap_gtt(struct intel_plane_state *plane_state)
>
> offset = calc_plane_aligned_offset(intel_fb, i, &x, &y);
>
> - drm_WARN_ON(&i915->drm, i >= ARRAY_SIZE(info->plane));
> - info->plane[i].offset = offset;
> - info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i],
> - tile_width * cpp);
> - info->plane[i].width = DIV_ROUND_UP(x + width, tile_width);
> - info->plane[i].height = DIV_ROUND_UP(y + height, tile_height);
> -
> - if (drm_rotation_90_or_270(rotation)) {
> - struct drm_rect r;
> -
> - /* rotate the x/y offsets to match the GTT view */
> - drm_rect_init(&r, x, y, width, height);
> - drm_rect_rotate(&r,
> - info->plane[i].width * tile_width,
> - info->plane[i].height * tile_height,
> - DRM_MODE_ROTATE_270);
> - x = r.x1;
> - y = r.y1;
> -
> - pitch_tiles = info->plane[i].height;
> - plane_state->color_plane[i].stride = pitch_tiles * tile_height;
> -
> - /* rotate the tile dimensions to match the GTT view */
> - swap(tile_width, tile_height);
> - } else {
> - pitch_tiles = info->plane[i].width;
> - plane_state->color_plane[i].stride = pitch_tiles * tile_width * cpp;
> - }
> -
> - /*
> - * We only keep the x/y offsets, so push all of the
> - * gtt offset into the x/y offsets.
> - */
> - intel_adjust_tile_offset(&x, &y,
> - tile_width, tile_height,
> - tile_size, pitch_tiles,
> - gtt_offset * tile_size, 0);
> -
> - gtt_offset += info->plane[i].width * info->plane[i].height;
> -
> + check_array_bounds(i915, plane_state->view.remapped.plane, i);
> + gtt_offset += calc_plane_remap_info(intel_fb, i, &view_dims,
> + plane_state->view.type,
> + offset, gtt_offset, x, y,
> + &plane_state->view.remapped.plane[i],
I guess we had some kind of magic aliasing going on here?
> + &plane_remap_info);
> +
> + check_array_bounds(i915, plane_state->color_plane, i);
> plane_state->color_plane[i].offset = 0;
> - plane_state->color_plane[i].x = x;
> - plane_state->color_plane[i].y = y;
> + plane_state->color_plane[i].x = plane_remap_info.x;
> + plane_state->color_plane[i].y = plane_remap_info.y;
> + plane_state->color_plane[i].stride = plane_remap_info.pitch;
> }
> }
>
> --
> 2.25.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
