Re: [CI v5 06/18] drm/i915/display/dp: Compute VRR state in atomic_check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 22, 2021 at 03:26:35PM -0800, Manasi Navare wrote:
> This forces a complete modeset if vrr drm crtc state goes
> from enabled to disabled and vice versa.
> This patch also computes vrr state variables from the mode timings
> and based on the vrr property set by userspace as well as hardware's
> vrr capability.
> 
> v2:
> *Rebase
> v3:
> * Vmin = max (vtotal, vmin) (Manasi)
> v4:
> * set crtc_state->vrr.enable = 0 for disable request
> v5:
> * drm_dbg_kms, squash crtc states def patch (Jani N)
> v6:
> * Move vrr modeset check to separate function (Jani N)
> v7:
> * Ville's fixes - vmin, vmax rename, fix rounding dir
> * Add pipeline full, flipline to crtc state
> * Pass conn state to vrr_compute_config (Ville)
> 
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c  |  9 +++
>  .../drm/i915/display/intel_display_types.h    |  7 ++
>  drivers/gpu/drm/i915/display/intel_dp.c       |  1 +
>  drivers/gpu/drm/i915/display/intel_vrr.c      | 70 +++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_vrr.h      |  8 +++
>  5 files changed, 95 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 2f878b7f9be8..7fc3ffdbc9b6 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -58,6 +58,7 @@
>  #include "display/intel_sdvo.h"
>  #include "display/intel_tv.h"
>  #include "display/intel_vdsc.h"
> +#include "display/intel_vrr.h"
>  
>  #include "gem/i915_gem_object.h"
>  
> @@ -11316,6 +11317,12 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
>  
>  	PIPE_CONF_CHECK_I(mst_master_transcoder);
>  
> +	PIPE_CONF_CHECK_BOOL(vrr.enable);
> +	PIPE_CONF_CHECK_I(vrr.vmin);
> +	PIPE_CONF_CHECK_I(vrr.vmax);
> +	PIPE_CONF_CHECK_I(vrr.flipline);
> +	PIPE_CONF_CHECK_I(vrr.pipeline_full);
> +
>  #undef PIPE_CONF_CHECK_X
>  #undef PIPE_CONF_CHECK_I
>  #undef PIPE_CONF_CHECK_BOOL
> @@ -12473,6 +12480,8 @@ static int intel_atomic_check(struct drm_device *dev,
>  			new_crtc_state->uapi.mode_changed = true;
>  	}
>  
> +	intel_vrr_check_modeset(state);
> +
>  	ret = drm_atomic_helper_check_modeset(dev, &state->base);
>  	if (ret)
>  		goto fail;
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 927a8aeae324..b5bac4c81de1 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1151,6 +1151,13 @@ struct intel_crtc_state {
>  	struct intel_dsb *dsb;
>  
>  	u32 psr2_man_track_ctl;
> +
> +	/* Variable Refresh Rate state */
> +	struct {
> +		bool enable;
> +		u8 pipeline_full;
> +		u16 flipline, vmin, vmax;
> +	} vrr;
>  };
>  
>  enum intel_pipe_crc_source {
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index e6efa0fc31ea..6c1aaaf587c2 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -1827,6 +1827,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  	if (!HAS_DDI(dev_priv))
>  		intel_dp_set_clock(encoder, pipe_config);
>  
> +	intel_vrr_compute_config(pipe_config, conn_state);
>  	intel_psr_compute_config(intel_dp, pipe_config);
>  	intel_dp_drrs_compute_config(intel_dp, pipe_config, output_bpp,
>  				     constant_n);
> diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
> index b0503edbfdfe..346ea3c16cc8 100644
> --- a/drivers/gpu/drm/i915/display/intel_vrr.c
> +++ b/drivers/gpu/drm/i915/display/intel_vrr.c
> @@ -29,3 +29,73 @@ bool intel_vrr_is_capable(struct drm_connector *connector)
>  		drm_dp_sink_can_do_video_without_timing_msa(intel_dp->dpcd) &&
>  		info->monitor_range.max_vfreq - info->monitor_range.min_vfreq > 10;
>  }
> +
> +void
> +intel_vrr_check_modeset(struct intel_atomic_state *state)
> +{
> +	int i;
> +	struct intel_crtc_state *old_crtc_state, *new_crtc_state;
> +	struct intel_crtc *crtc;
> +
> +	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> +					    new_crtc_state, i) {
> +		if (new_crtc_state->uapi.vrr_enabled !=
> +		    old_crtc_state->uapi.vrr_enabled)
> +			new_crtc_state->uapi.mode_changed = true;
> +	}
> +}
> +
> +void
> +intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
> +			 struct drm_connector_state *conn_state)
> +{
> +	struct intel_connector *connector =
> +		to_intel_connector(conn_state->connector);
> +	struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
> +	const struct drm_display_info *info = &connector->base.display_info;
> +	int vmin, vmax;
> +
> +	if (!intel_vrr_is_capable(&connector->base))
> +		return;
> +
> +	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
> +		return;
> +
> +	if (!crtc_state->uapi.vrr_enabled)
> +		return;
> +
> +	vmin = DIV_ROUND_UP(adjusted_mode->crtc_clock * 1000,
> +			    adjusted_mode->crtc_htotal * info->monitor_range.max_vfreq);
> +	vmax = adjusted_mode->crtc_clock * 1000 /
> +		(adjusted_mode->crtc_htotal * info->monitor_range.min_vfreq);
> +
> +	vmin = max_t(int, vmin, adjusted_mode->crtc_vtotal);
> +	vmax = max_t(int, vmax, adjusted_mode->crtc_vtotal);
> +
> +	if (vmin >= vmax)
> +		return;
> +
> +	/*
> +	 * flipline determines the min vblank length the hardware will
> +	 * generate, and flipline>=vmin+1, hence we reduce vmin by one
> +	 * to make sure we can get the actual min vblank length.
> +	 */
> +	crtc_state->vrr.vmin = vmin - 1;
> +	crtc_state->vrr.vmax = vmax;
> +	crtc_state->vrr.enable = true;
> +
> +	crtc_state->vrr.flipline = crtc_state->vrr.vmin + 1;
> +
> +	/*
> +	 * FIXME: s/4/framestart_delay+1/ to get consistent

Should say just framestart_delay here since it now includes the +1

> +	 * earliest/latest points for register latching regardless
> +	 * of the framestart_delay used?
> +	 *
> +	 * FIXME: this really needs the extra scanline to provide consistent
> +	 * behaviour for all framestart_delay values. Otherwise with
> +	 * framestart_delay==3 we will end up extending the min vblank by

And this should say framestart_delay==4

> +	 * one extra line.
> +	 */
> +	crtc_state->vrr.pipeline_full =
> +		min(255, crtc_state->vrr.vmin - adjusted_mode->crtc_vdisplay - 4 - 1);
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_vrr.h b/drivers/gpu/drm/i915/display/intel_vrr.h
> index 3700acec5d09..67c477d6d1a4 100644
> --- a/drivers/gpu/drm/i915/display/intel_vrr.h
> +++ b/drivers/gpu/drm/i915/display/intel_vrr.h
> @@ -9,7 +9,15 @@
>  #include <linux/types.h>
>  
>  struct drm_connector;
> +struct drm_connector_state;
> +struct intel_atomic_state;
> +struct intel_crtc;
> +struct intel_crtc_state;
> +struct intel_dp;
>  
>  bool intel_vrr_is_capable(struct drm_connector *connector);
> +void intel_vrr_check_modeset(struct intel_atomic_state *state);
> +void intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
> +			      struct drm_connector_state *conn_state);
>  
>  #endif /* __INTEL_VRR_H__ */
> -- 
> 2.19.1

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux