From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Generalize icl_get_first_dbuf_slice_offset() into something that
just gives us the start+end of the dbuf chunk covered by the
specified slices as a standard ddb entry. Initial idea was to use
it during readout as well, but we shall see.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_pm.c | 55 +++++++++++----------------------
1 file changed, 18 insertions(+), 37 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 100ec37ec483..4eb2d36ed108 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4035,25 +4035,23 @@ static int intel_dbuf_slice_size(struct drm_i915_private *dev_priv)
INTEL_INFO(dev_priv)->num_supported_dbuf_slices;
}
-/*
- * Calculate initial DBuf slice offset, based on slice size
- * and mask(i.e if slice size is 1024 and second slice is enabled
- * offset would be 1024)
- */
-static unsigned int
-icl_get_first_dbuf_slice_offset(u32 dbuf_slice_mask,
- u32 slice_size,
- u32 ddb_size)
+static void
+skl_ddb_entry_for_slices(struct drm_i915_private *dev_priv, u8 slice_mask,
+ struct skl_ddb_entry *ddb)
{
- unsigned int offset = 0;
+ int slice_size = intel_dbuf_slice_size(dev_priv);
- if (!dbuf_slice_mask)
- return 0;
+ if (!slice_mask) {
+ ddb->start = 0;
+ ddb->end = 0;
+ return;
+ }
- offset = (ffs(dbuf_slice_mask) - 1) * slice_size;
+ ddb->start = (ffs(slice_mask) - 1) * slice_size;
+ ddb->end = fls(slice_mask) * slice_size;
- WARN_ON(offset >= ddb_size);
- return offset;
+ WARN_ON(ddb->start >= ddb->end);
+ WARN_ON(ddb->end > intel_dbuf_size(dev_priv));
}
u32 skl_ddb_dbuf_slice_mask(struct drm_i915_private *dev_priv,
@@ -4123,12 +4121,10 @@ skl_ddb_get_pipe_allocation_limits(struct drm_i915_private *dev_priv,
const struct intel_dbuf_state *old_dbuf_state =
intel_atomic_get_old_dbuf_state(intel_state);
u8 active_pipes = new_dbuf_state->active_pipes;
- u16 ddb_size;
+ struct skl_ddb_entry ddb_slices;
u32 ddb_range_size;
u32 i;
u32 dbuf_slice_mask;
- u32 offset;
- u32 slice_size;
u32 total_slice_mask;
u32 start, end;
int ret;
@@ -4141,9 +4137,6 @@ skl_ddb_get_pipe_allocation_limits(struct drm_i915_private *dev_priv,
return 0;
}
- ddb_size = intel_dbuf_size(dev_priv);
- slice_size = intel_dbuf_slice_size(dev_priv);
-
/*
* If the state doesn't change the active CRTC's or there is no
* modeset request, then there's no need to recalculate;
@@ -4169,20 +4162,8 @@ skl_ddb_get_pipe_allocation_limits(struct drm_i915_private *dev_priv,
*/
dbuf_slice_mask = skl_compute_dbuf_slices(for_crtc, active_pipes);
- /*
- * Figure out at which DBuf slice we start, i.e if we start at Dbuf S2
- * and slice size is 1024, the offset would be 1024
- */
- offset = icl_get_first_dbuf_slice_offset(dbuf_slice_mask,
- slice_size, ddb_size);
-
- /*
- * Figure out total size of allowed DBuf slices, which is basically
- * a number of allowed slices for that pipe multiplied by slice size.
- * Inside of this
- * range ddb entries are still allocated in proportion to display width.
- */
- ddb_range_size = hweight8(dbuf_slice_mask) * slice_size;
+ skl_ddb_entry_for_slices(dev_priv, dbuf_slice_mask, &ddb_slices);
+ ddb_range_size = skl_ddb_entry_size(&ddb_slices);
total_slice_mask = dbuf_slice_mask;
for_each_new_intel_crtc_in_state(intel_state, crtc, crtc_state, i) {
@@ -4239,8 +4220,8 @@ skl_ddb_get_pipe_allocation_limits(struct drm_i915_private *dev_priv,
start = ddb_range_size * weight_before_pipe / total_weight;
end = ddb_range_size * (weight_before_pipe + pipe_weight) / total_weight;
- alloc->start = offset + start;
- alloc->end = offset + end;
+ alloc->start = ddb_slices.start + start;
+ alloc->end = ddb_slices.start + end;
drm_dbg_kms(&dev_priv->drm,
"[CRTC:%d:%s] dbuf slices 0x%x, ddb (%d - %d), active pipes 0x%x\n",
--
2.26.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
