Re: ✗ Fi.CI.CHECKPATCH: warning for Add support for DP-HDMI2.1 PCON (rev9)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 23-Dec-20 12:24 PM, Shankar, Uma wrote:


-----Original Message-----
From: Nautiyal, Ankit K <ankit.k.nautiyal@xxxxxxxxx>
Sent: Wednesday, December 23, 2020 11:27 AM
To: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>; Sharma, Swati2
<swati2.sharma@xxxxxxxxx>; Shankar, Uma <uma.shankar@xxxxxxxxx>
Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
Subject: Re:  ✗ Fi.CI.CHECKPATCH: warning for Add support for DP-
HDMI2.1 PCON (rev9)

Hi Jani,

I apologize to miss these checkpatch errors. I mistakenly used some older version
of checkpatch script and couldn't get these.

Nevertheless I should have taken care of the warnings from the patchwork. I fully
understand that onus is on the submitter of the series to fix all such warnings
and checks, and I take full responsibility of this mistake.

Thank you for fixing these issues this time, and I assure you that I will take care
in future and make sure that the checkpatch warnings are addressed.

Once again I apologize for the fault.

I also should have checked this, will be more careful to ensure this remains the top item
in the checklist along with CI results.

Regards,
Uma Shankar

Apologies from my side too.

Thanks and Regards,
Swati

Thanks & Regards,

Ankit


On 12/22/2020 10:13 PM, Jani Nikula wrote:
On Fri, 18 Dec 2020, Patchwork <patchwork@xxxxxxxxxxxxxxxxxxxxxx> wrote:
== Series Details ==

Series: Add support for DP-HDMI2.1 PCON (rev9)
URL   : https://patchwork.freedesktop.org/series/82098/
State : warning

== Summary ==

All -

I've fixed most of the checkpatch warnings (save for LONG_LINE and
BIT_MACRO that we don't care so much about) while applying. It's not
something I normally do, and I really don't want to find these when
the series is at v7 and the same warnings have been there since
September and I keep being pinged about merging.

Keeping the driver nice and clean is your job too, not just mine.

BR,
Jani.


$ dim checkpatch origin/drm-tip
26eb0c2f2ee1 drm/edid: Add additional HFVSDB fields for HDMI2.1
-:61: WARNING:FROM_SIGN_OFF_MISMATCH: From:/Signed-off-by: email
name mismatch: 'From: Swati Sharma <swati2.sharma@xxxxxxxxx>' != 'Signed-off-
by: Sharma, Swati2 <swati2.sharma@xxxxxxxxx>'

total: 0 errors, 1 warnings, 0 checks, 36 lines checked 13ffe829d77e
drm/edid: Parse MAX_FRL field from HFVSDB block
-:73: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open
parenthesis
#73: FILE: drivers/gpu/drm/drm_edid.c:4948:
+		drm_get_max_frl_rate(max_frl_rate, &hdmi->max_lanes,
+				&hdmi->max_frl_rate_per_lane);

-:95: WARNING:FROM_SIGN_OFF_MISMATCH: From:/Signed-off-by: email
name mismatch: 'From: Swati Sharma <swati2.sharma@xxxxxxxxx>' != 'Signed-off-
by: Sharma, Swati2 <swati2.sharma@xxxxxxxxx>'

total: 0 errors, 1 warnings, 1 checks, 68 lines checked
89853c019e04 drm/edid: Parse DSC1.2 cap fields from HFVSDB block
-:51: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open
parenthesis
#51: FILE: drivers/gpu/drm/drm_edid.c:4969:
+			drm_get_max_frl_rate(dsc_max_frl_rate, &hdmi_dsc-
max_lanes,
+					&hdmi_dsc->max_frl_rate_per_lane);

-:52: WARNING:LONG_LINE: line length of 101 exceeds 100 columns
#52: FILE: drivers/gpu/drm/drm_edid.c:4970:
+			hdmi_dsc->total_chunk_kbytes = hf_vsdb[13] &
+DRM_EDID_DSC_TOTAL_CHUNK_KBYTES;

total: 0 errors, 1 warnings, 1 checks, 125 lines checked
5120b1727391 drm/dp_helper: Add Helpers for FRL Link Training support
for DP-HDMI2.1 PCON
c68914ce7b67 drm/dp_helper: Add support for link failure detection
-:112: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open
parenthesis
#112: FILE: include/drm/drm_dp_helper.h:2055:
+void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux,
+					  struct drm_connector *connector);

total: 0 errors, 0 warnings, 1 checks, 76 lines checked
2f4d3c12ee27 drm/dp_helper: Add support for Configuring DSC for
HDMI2.1 Pcon
-:15: WARNING:TYPO_SPELLING: 'Convertor' may be misspelled - perhaps
'Converter'?
#15:
v3: Only setting the DSC bits for the Protocol Convertor control

-:165: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */
on a separate line
#165: FILE: drivers/gpu/drm/drm_dp_helper.c:3037:
+ * */

-:185: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */
on a separate line
#185: FILE: drivers/gpu/drm/drm_dp_helper.c:3057:
+ * */

-:210: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */
on a separate line
#210: FILE: drivers/gpu/drm/drm_dp_helper.c:3082:
+ * */

total: 0 errors, 4 warnings, 0 checks, 343 lines checked
d1464a87a5a8 drm/dp_helper: Add helpers to configure PCONs RGB-YCbCr
Conversion
-:18: WARNING:TYPO_SPELLING: 'accomodate' may be misspelled - perhaps
'accommodate'?
#18:
-Modified the color-conversion cap helper function, to accomodate

total: 0 errors, 1 warnings, 0 checks, 106 lines checked
29e16a799211 drm/i915: Capture max frl rate for PCON in dfp cap
structure
-:13: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit
description (prefer a maximum 75 chars per line)
#13:
-tweaked the comparison of target bw and pcon frl bw to avoid roundup
errors.

total: 0 errors, 1 warnings, 0 checks, 60 lines checked
0f68d7283295 drm/i915: Add support for starting FRL training for
HDMI2.1 via PCON
-:86: CHECK:BRACES: Blank lines aren't necessary after an open brace '{'
#86: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4005:
+{
+

-:147: WARNING:LONG_LINE: line length of 101 exceeds 100 columns
#147: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4066:
+	wait_for(is_active = drm_dp_pcon_is_frl_ready(&intel_dp->aux) ==
+true, TIMEOUT_FRL_READY_MS);

-:166: WARNING:LONG_LINE: line length of 112 exceeds 100 columns
#166: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4085:
+	wait_for(is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux)
+== true, TIMEOUT_HDMI_LINK_ACTIVE_MS);

-:172: WARNING:LONG_LINE: line length of 101 exceeds 100 columns
#172: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4091:
+	if (DP_PCON_HDMI_MODE_FRL !=
+drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, &frl_trained_mask)) {

-:172: WARNING:CONSTANT_COMPARISON: Comparisons should place the
constant on the right side of the test
#172: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4091:
+	if (DP_PCON_HDMI_MODE_FRL !=
+drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, &frl_trained_mask)) {

-:176: WARNING:LONG_LINE: line length of 109 exceeds 100 columns
#176: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4095:
+	drm_dbg(&i915->drm, "MAX_FRL_MASK = %u, FRL_TRAINED_MASK =
%u\n",
+max_frl_bw_mask, frl_trained_mask);

total: 0 errors, 5 warnings, 1 checks, 194 lines checked
3793f5252161 drm/i915: Check for FRL training before DP Link training
126578f6fe39 drm/i915: Add support for enabling link status and
recovery
-:54: WARNING:LONG_LINE: line length of 107 exceeds 100 columns
#54: FILE: drivers/gpu/drm/i915/display/intel_dp.c:6031:
+		drm_dp_pcon_hdmi_frl_link_error_count(&intel_dp->aux,
+&intel_dp->attached_connector->base);

total: 0 errors, 1 warnings, 0 checks, 83 lines checked ca5d8df43ceb
drm/i915: Read DSC capabilities of the HDMI2.1 PCON encoder
-:51: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open
parenthesis
#51: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4000:
+	if (drm_dp_dpcd_read(&intel_dp->aux, DP_PCON_DSC_ENCODER,
+				     intel_dp->pcon_dsc_dpcd,

-:57: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open
parenthesis
#57: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4006:
+	drm_dbg_kms(&i915->drm, "PCON ENCODER DSC DPCD: %*ph\n",
+		   (int)sizeof(intel_dp->pcon_dsc_dpcd), intel_dp-
pcon_dsc_dpcd);

total: 0 errors, 0 warnings, 2 checks, 39 lines checked 35f69a655bad
drm/i915: Add helper functions for calculating DSC parameters for
HDMI2.1
-:57: WARNING:TYPO_SPELLING: 'capabilites' may be misspelled - perhaps
'capabilities'?
#57: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3458:
+ * and dsc decoder capabilites

-:143: WARNING:SUSPECT_CODE_INDENT: suspect code indent for
conditional statements (16, 23)
#143: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3544:
+		if (min_slices <= 1 && src_max_slices >= 1 && hdmi_max_slices
= 1)
+		       target_slices = 1;

-:145: WARNING:SUSPECT_CODE_INDENT: suspect code indent for
conditional statements (16, 23)
#145: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3546:
+		else if (min_slices <= 2 && src_max_slices >= 2 &&
hdmi_max_slices >= 2)
+		       target_slices = 2;

-:147: WARNING:SUSPECT_CODE_INDENT: suspect code indent for
conditional statements (16, 23)
#147: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3548:
+		else if (min_slices <= 4 && src_max_slices >= 4 &&
hdmi_max_slices >= 4)
+		       target_slices = 4;

-:149: WARNING:SUSPECT_CODE_INDENT: suspect code indent for
conditional statements (16, 23)
#149: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3550:
+		else if (min_slices <= 8 && src_max_slices >= 8 &&
hdmi_max_slices >= 8)
+		       target_slices = 8;

-:151: WARNING:SUSPECT_CODE_INDENT: suspect code indent for
conditional statements (16, 23)
#151: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3552:
+		else if (min_slices <= 12 && src_max_slices >= 12 &&
hdmi_max_slices >= 12)
+		       target_slices = 12;

-:153: WARNING:SUSPECT_CODE_INDENT: suspect code indent for
conditional statements (16, 23)
#153: FILE: drivers/gpu/drm/i915/display/intel_hdmi.c:3554:
+		else if (min_slices <= 16 && src_max_slices >= 16 &&
hdmi_max_slices >= 16)
+		       target_slices = 16;

total: 0 errors, 7 warnings, 0 checks, 248 lines checked 34ee9dfdadfd
drm/i915/display: Configure PCON for DSC1.1 to DSC1.2 encoding
-:75: CHECK:BRACES: Blank lines aren't necessary after an open brace '{'
#75: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4171:
+{
+

-:92: CHECK:LINE_SPACING: Please don't use multiple blank lines
#92: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4188:
+
+

-:155: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open
parenthesis
#155: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4251:
+	bits_per_pixel = intel_dp_pcon_dsc_enc_bpp(intel_dp, crtc_state,
+						  num_slices, slice_width);

total: 0 errors, 0 warnings, 3 checks, 157 lines checked d739034947bb
drm/i915/display: Let PCON convert from RGB to YCbCr if it can
-:104: WARNING:LONG_LINE: line length of 101 exceeds 100 columns
#104: FILE: drivers/gpu/drm/i915/display/intel_dp.c:4368:
+
DP_DS_HDMI_BT2020_RGB_YCBCR_CONV);

-:156: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open
parenthesis
#156: FILE: drivers/gpu/drm/i915/display/intel_dp.c:6922:
+	rgb_to_ycbcr = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp-
dpcd,
+							intel_dp-
downstream_ports,

total: 0 errors, 1 warnings, 1 checks, 152 lines checked


_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

--
~Swati Sharma
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux