Quoting Huang, Sean Z (2020-12-07 02:21:22)
> Set the KCR init during the boot time, which is required by
> hardware, to allow us doing further protection operation such
> as sending commands to GPU or TEE
>
> Signed-off-by: Huang, Sean Z <sean.z.huang@xxxxxxxxx>
<SNIP>
> +++ b/drivers/gpu/drm/i915/pxp/intel_pxp.c
> @@ -6,6 +6,7 @@
> #include "i915_drv.h"
> #include "intel_pxp.h"
> #include "intel_pxp_context.h"
> +#include "intel_pxp_sm.h"
>
> static void intel_pxp_write_irq_mask_reg(struct drm_i915_private *i915, u32 mask)
> {
> @@ -77,6 +78,8 @@ static void intel_pxp_irq_work(struct work_struct *work)
>
> int intel_pxp_init(struct drm_i915_private *i915)
> {
> + int ret;
> +
> if (!i915)
> return -EINVAL;
>
> @@ -92,13 +95,19 @@ int intel_pxp_init(struct drm_i915_private *i915)
> return -EFAULT;
> }
>
> + ret = pxp_sm_set_kcr_init_reg(i915);
I think this should just be intel_pxp_sm_init() and then do whatever it
needs to initialize. Also as we plan on having only a single session, I
don't see why would we want a separate session management file/header.
So I would be inclined to just inline the KCR_INIT macro write here. If
this is moved to appropriate spot during intel_gt initialization, we
should have the hardware wakeref, so would be just a single
intel_uncore_write.
> +++ b/drivers/gpu/drm/i915/pxp/intel_pxp_sm.c
> @@ -0,0 +1,38 @@
> +// SPDX-License-Identifier: MIT
> +/*
> + * Copyright(c) 2020, Intel Corporation. All rights reserved.
> + */
> +
> +#include "gt/intel_context.h"
> +#include "gt/intel_engine_pm.h"
> +
> +#include "intel_pxp.h"
> +#include "intel_pxp_sm.h"
> +#include "intel_pxp_context.h"
> +
> +static int pxp_reg_write(struct drm_i915_private *i915, u32 offset, u32 regval)
> +{
> + intel_wakeref_t wakeref;
> +
> + if (!i915)
> + return -EINVAL;
Again, GEM_BUG_ON(!i915) should suffice.
> +
> + with_intel_runtime_pm(&i915->runtime_pm, wakeref) {
> + i915_reg_t reg_offset = {offset};
See below, here we convert from u32 to i915_reg_t.
> +
> + intel_uncore_write(&i915->uncore, reg_offset, regval);
> + }
I don't think we want to grab the wakeref at a low level reg_write
function but at a higher levels to clearly distinct functions that need
to access hardware and those who don't.
> + return 0;
> +}
> +
> +int pxp_sm_set_kcr_init_reg(struct drm_i915_private *i915)
> +{
> + int ret;
> +
> + ret = pxp_reg_write(i915, KCR_INIT.reg, KCR_INIT_ALLOW_DISPLAY_ME_WRITES);
See above related to offset. Here we convert to u32. We shouldn't escape
the protection offered by _MMIO macro.
Based on the register name this feels like it should somehow be related
to display init?
> + if (ret)
> + drm_err(&i915->drm, "Failed to write()\n");
There is an error message in the upper level function, so one of these
becomes redundant.
After this has been moved to intel_gt init, the hardware wakeref is
definitely held
> +++ b/drivers/gpu/drm/i915/pxp/intel_pxp_sm.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: MIT */
> +/*
> + * Copyright(c) 2020, Intel Corporation. All rights reserved.
> + */
> +
> +#ifndef __INTEL_PXP_SM_H__
> +#define __INTEL_PXP_SM_H__
> +
> +#include "i915_drv.h"
> +#include "i915_reg.h"
> +
> +/* KCR register definitions */
> +#define KCR_INIT _MMIO(0x320f0)
> +#define KCR_INIT_MASK_SHIFT (16)
> +/* Setting KCR Init bit is required after system boot */
> +#define KCR_INIT_ALLOW_DISPLAY_ME_WRITES (BIT(14) | (BIT(14) << KCR_INIT_MASK_SHIFT))
If this is only used from single place, it should go to the .c file
that uses it.
Regards, Joonas
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
