On Tue, Nov 10, 2020 at 12:59:10PM +0200, Jani Nikula wrote:
> On Thu, 22 Oct 2020, Manasi Navare <manasi.d.navare@xxxxxxxxx> wrote:
> > VRR achieves vblank stretching using the HW PUSH functionality.
> > So once the VRR is enabled during modeset then for each flip
> > request from userspace, in the atomic tail pipe_update_end()
> > we need to set the VRR push bit in HW for it to terminate
> > the vblank at configured flipline or anytime after flipline
> > or latest at the Vmax.
> >
> > The HW clears the PUSH bit after the double buffer updates
> > are completed.
> >
> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/display/intel_sprite.c | 5 +++++
> > drivers/gpu/drm/i915/display/intel_vrr.c | 17 +++++++++++++++++
> > drivers/gpu/drm/i915/display/intel_vrr.h | 1 +
> > 3 files changed, 23 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c b/drivers/gpu/drm/i915/display/intel_sprite.c
> > index b6deeb338477..cb10fe462f06 100644
> > --- a/drivers/gpu/drm/i915/display/intel_sprite.c
> > +++ b/drivers/gpu/drm/i915/display/intel_sprite.c
> > @@ -49,6 +49,7 @@
> > #include "intel_psr.h"
> > #include "intel_dsi.h"
> > #include "intel_sprite.h"
> > +#include "intel_vrr.h"
> >
> > int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
> > int usecs)
> > @@ -217,6 +218,10 @@ void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state)
> > intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
> > icl_dsi_frame_update(new_crtc_state);
> >
> > + /* Send VRR Push to terminate Vblank */
> > + if (new_crtc_state->vrr.enable)
> > + intel_vrr_send_push(new_crtc_state);
> > +
>
> Maybe move the vrr.enable check to the function?
Yes makes sense will do
>
> > /* We're still in the vblank-evade critical section, this can't race.
> > * Would be slightly nice to just grab the vblank count and arm the
> > * event outside of the critical section - the spinlock might spin for a
> > diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
> > index 7f1353bac583..ec1ce88e869c 100644
> > --- a/drivers/gpu/drm/i915/display/intel_vrr.c
> > +++ b/drivers/gpu/drm/i915/display/intel_vrr.c
> > @@ -102,3 +102,20 @@ void intel_vrr_enable(struct intel_encoder *encoder,
> > trans_push);
> > }
> >
> > +void intel_vrr_send_push(const struct intel_crtc_state *crtc_state)
> > +{
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > + enum pipe pipe = crtc->pipe;
> > + u32 trans_push;
> > +
> > + trans_push = intel_de_read(dev_priv, TRANS_PUSH(pipe));
> > + WARN_ON(!(trans_push & TRANS_PUSH_EN));
>
> drm_WARN_ON, and perhaps move this below the register rmw. It doesn't
> change the flow anyway.
Yes will do
Manasi
>
> > +
> > + trans_push |= TRANS_PUSH_SEND;
> > + intel_de_write(dev_priv, TRANS_PUSH(pipe), trans_push);
> > +
> > + drm_dbg(&dev_priv->drm, "Sending VRR Push on Pipe (%c)\n",
> > + pipe_name(pipe));
>
> drm_dbg_kms
>
> > +}
> > +
> > diff --git a/drivers/gpu/drm/i915/display/intel_vrr.h b/drivers/gpu/drm/i915/display/intel_vrr.h
> > index 05d982d6fbae..a6b78e1676cb 100644
> > --- a/drivers/gpu/drm/i915/display/intel_vrr.h
> > +++ b/drivers/gpu/drm/i915/display/intel_vrr.h
> > @@ -19,5 +19,6 @@ void intel_vrr_compute_config(struct intel_dp *intel_dp,
> > struct intel_crtc_state *crtc_state);
> > void intel_vrr_enable(struct intel_encoder *encoder,
> > const struct intel_crtc_state *crtc_state);
> > +void intel_vrr_send_push(const struct intel_crtc_state *crtc_state);
> >
> > #endif /* __INTEL_VRR_H__ */
>
> --
> Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
