> -----Original Message-----
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Sent: Thursday, November 26, 2020 10:43 PM
> To: Shankar, Uma <uma.shankar@xxxxxxxxx>
> Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Subject: Re: [v11 07/13] i915/display: Enable BT2020 for HDR on LSPCON devices
>
> On Thu, Nov 26, 2020 at 01:44:39PM +0530, Uma Shankar wrote:
> > Enable Colorspace as BT2020 if driving HDR content.Sending Colorimetry
> > data for HDR using AVI infoframe. LSPCON firmware expects this and
> > though SOC drives DP, for HDMI panel AVI infoframe is sent to the
> > LSPCON device which transfers the same to HDMI sink.
> >
> > v2: Dropped state managed in drm core as per Jani Nikula's suggestion.
> >
> > v3: Aligned colorimetry handling for lspcon as per
> > compute_avi_infoframes, as suggested by Ville.
> >
> > v4: Added BT2020 as default for HDR. Adding the colorspace property
> > interface for pcon will be take up separately. Moved changes of
> > quantization in a separate patch as per Ville's comments.
> >
> > Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/display/intel_lspcon.c | 18 ++++++++++++++++++
> > 1 file changed, 18 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c
> > b/drivers/gpu/drm/i915/display/intel_lspcon.c
> > index 0a4c05d67108..f6f58a991e7a 100644
> > --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> > +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> > @@ -481,6 +481,10 @@ void lspcon_read_infoframe(struct intel_encoder
> *encoder,
> > /* FIXME implement this */
> > }
> >
> > +/* HDMI HDR Colorspace Spec Definitions */
> > +#define NORMAL_COLORIMETRY_MASK 0x3
> > +#define EXTENDED_COLORIMETRY_MASK 0x7
> > +#define HDMI_COLORIMETRY_BT2020_YCC ((3 << 0) | (6 << 2) | (0 << 5))
> > void lspcon_set_infoframes(struct intel_encoder *encoder,
> > bool enable,
> > const struct intel_crtc_state *crtc_state, @@ -523,6
> +527,20 @@
> > void lspcon_set_infoframes(struct intel_encoder *encoder,
> > else
> > frame.avi.colorspace = HDMI_COLORSPACE_RGB;
> >
> > + /*
> > + * Set BT2020 colorspace if driving HDR data
> > + * ToDo: Make this generic and expose all colorspaces for
> > + * lspcon. We need to expose HDMI colorspaces when we detect
> > + * lspcon, this has to happen after connector is registered,
> > + * so need to fix this appropriately
> > + */
> > + if (lspcon->active && conn_state->hdr_output_metadata) {
> > + frame.avi.colorimetry = HDMI_COLORIMETRY_BT2020_YCC &
> > + NORMAL_COLORIMETRY_MASK;
> > + frame.avi.extended_colorimetry =
> (HDMI_COLORIMETRY_BT2020_YCC >> 2) &
> > +
> EXTENDED_COLORIMETRY_MASK;
> > + }
> > +
>
> I don't understand the point of dancing around this instead of just fixing it.
>
> There, I did half the work for you
> https://patchwork.freedesktop.org/series/84309/
Somehow was not able to think of right way to handle this.
Thanks Ville for your patience and help. I will add the patch to series and build
on top of it.
Regards,
Uma Shankar
>
> > /* nonsense combination */
> > drm_WARN_ON(encoder->base.dev, crtc_state->limited_color_range &&
> > crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB);
> > --
> > 2.26.2
>
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
