[PATCH] drm/i915/lspcon: enter standby mode to enhance power saving

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



After system boot up, LSPCON will be configured as PCON mode.
But it never go into power saving state. Source driver can
do the following. Then LSPCON can enter standby mode
automatically to save more power.

1. At PCON mode, source driver write 0x2 to DPCD 600h.
2. At LS mode, try to disable DP_DUAL_MODE_TMDS_OEN.

Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
Cc: Uma Shankar <uma.shankar@xxxxxxxxx>
Cc: Cooper Chiou <cooper.chiou@xxxxxxxxx>
Cc: Khaled Almahallawy <khaled.almahallawy@xxxxxxxxx>
Signed-off-by: Lee Shawn C <shawn.c.lee@xxxxxxxxx>
---
 drivers/gpu/drm/i915/display/intel_dp.c     | 7 ++++++-
 drivers/gpu/drm/i915/display/intel_lspcon.c | 8 ++++++++
 drivers/gpu/drm/i915/display/intel_lspcon.h | 1 +
 3 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index ec8359f03aaf..7dd16d6bd5ba 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -6536,6 +6536,7 @@ intel_dp_detect(struct drm_connector *connector,
 	struct drm_i915_private *dev_priv = to_i915(connector->dev);
 	struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector));
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+	struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp);
 	struct intel_encoder *encoder = &dig_port->base;
 	enum drm_connector_status status;
 
@@ -6632,9 +6633,13 @@ intel_dp_detect(struct drm_connector *connector,
 	intel_dp_check_service_irq(intel_dp);
 
 out:
-	if (status != connector_status_connected && !intel_dp->is_mst)
+	if (status != connector_status_connected && !intel_dp->is_mst) {
 		intel_dp_unset_edid(intel_dp);
 
+		if (lspcon && lspcon->active)
+			lspcon_standby(dp_to_dig_port(intel_dp));
+	}
+
 	/*
 	 * Make sure the refs for power wells enabled during detect are
 	 * dropped to avoid a new detect cycle triggered by HPD polling.
diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
index e37d45e531df..4913ff20d7b4 100644
--- a/drivers/gpu/drm/i915/display/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
@@ -550,6 +550,14 @@ static bool lspcon_init(struct intel_digital_port *dig_port)
 	return true;
 }
 
+void lspcon_standby(struct intel_digital_port *dig_port)
+{
+	struct intel_dp *dp = &dig_port->dp;
+
+	if (drm_dp_dpcd_writeb(&dp->aux, DP_SET_POWER, DP_SET_POWER_D3) <= 0)
+		DRM_DEBUG_KMS("Failed to write EDID checksum\n");
+}
+
 void lspcon_resume(struct intel_digital_port *dig_port)
 {
 	struct intel_lspcon *lspcon = &dig_port->lspcon;
diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.h b/drivers/gpu/drm/i915/display/intel_lspcon.h
index b03dcb7076d8..658a2e5b22db 100644
--- a/drivers/gpu/drm/i915/display/intel_lspcon.h
+++ b/drivers/gpu/drm/i915/display/intel_lspcon.h
@@ -16,6 +16,7 @@ struct intel_encoder;
 struct intel_lspcon;
 
 void lspcon_resume(struct intel_digital_port *dig_port);
+void lspcon_standby(struct intel_digital_port *dig_port);
 void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon);
 void lspcon_write_infoframe(struct intel_encoder *encoder,
 			    const struct intel_crtc_state *crtc_state,
-- 
2.17.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux