Re: [PATCH v6 3/6] drm/i915: Add hw.pipe_mode to allow bigjoiner pipe/transcoder split

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 05, 2020 at 06:15:11PM +0200, Ville Syrjälä wrote:
> On Thu, Nov 05, 2020 at 08:03:01AM -0800, Navare, Manasi wrote:
> > On Thu, Nov 05, 2020 at 05:13:04PM +0200, Ville Syrjälä wrote:
> > > On Mon, Nov 02, 2020 at 03:04:00PM -0800, Manasi Navare wrote:
> > > > From: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > > > 
> > > > With bigjoiner, there will be 2 pipes driving 2 halves of 1 transcoder,
> > > > because of this, we need a pipe_mode for various calculations, including
> > > > for example watermarks, plane clipping, etc.
> > > > 
> > > > v9:
> > > > * pipe_mode in state dump nd state check (Ville)
> > > > v8:
> > > > * Add pipe_mode in readout in verify_crtc_state (Ville)
> > > > v7:
> > > > * Remove redundant comment (Ville)
> > > > * Just keep mode instead of pipe_mode (Ville)
> > > > v6:
> > > > * renaming in separate function, only pipe_mode here (Ville)
> > > > * Add description (Maarten)
> > > > v5:
> > > > * Rebase (Manasi)
> > > > v4:
> > > > * Manual rebase (Manasi)
> > > > v3:
> > > > * Change state to crtc_state, fix rebase err  (Manasi)
> > > > v2:
> > > > * Manual Rebase (Manasi)
> > > > 
> > > > Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > > > Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > > > Reviewed-by: Animesh Manna <animesh.manna@xxxxxxxxx>
> > > > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > ---
> > > >  drivers/gpu/drm/i915/display/intel_display.c  | 51 ++++++++-----
> > > >  .../drm/i915/display/intel_display_types.h    | 11 ++-
> > > >  drivers/gpu/drm/i915/intel_pm.c               | 76 +++++++++----------
> > > >  3 files changed, 81 insertions(+), 57 deletions(-)
> > > > 
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > > index e9fbcfe1649e..c045ef0ac801 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > @@ -6167,18 +6167,16 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
> > > >  
> > > >  static int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state)
> > > >  {
> > > > -	const struct drm_display_mode *adjusted_mode =
> > > > -		&crtc_state->hw.adjusted_mode;
> > > > +	const struct drm_display_mode *pipe_mode = &crtc_state->hw.pipe_mode;
> > > >  	int width, height;
> > > >  
> > > >  	if (crtc_state->pch_pfit.enabled) {
> > > >  		width = drm_rect_width(&crtc_state->pch_pfit.dst);
> > > >  		height = drm_rect_height(&crtc_state->pch_pfit.dst);
> > > >  	} else {
> > > > -		width = adjusted_mode->crtc_hdisplay;
> > > > -		height = adjusted_mode->crtc_vdisplay;
> > > > +		width = pipe_mode->crtc_hdisplay;
> > > > +		height = pipe_mode->crtc_vdisplay;
> > > >  	}
> > > > -
> > > >  	return skl_update_scaler(crtc_state, !crtc_state->hw.active,
> > > >  				 SKL_CRTC_INDEX,
> > > >  				 &crtc_state->scaler_state.scaler_id,
> > > > @@ -8192,7 +8190,7 @@ static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc)
> > > >  
> > > >  static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *crtc_state)
> > > >  {
> > > > -	u32 pixel_rate = crtc_state->hw.adjusted_mode.crtc_clock;
> > > > +	u32 pixel_rate = crtc_state->hw.pipe_mode.crtc_clock;
> > > >  	unsigned int pipe_w, pipe_h, pfit_w, pfit_h;
> > > >  
> > > >  	/*
> > > > @@ -8225,7 +8223,11 @@ static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *crtc_state)
> > > >  static void intel_encoder_get_config(struct intel_encoder *encoder,
> > > >  				     struct intel_crtc_state *crtc_state)
> > > >  {
> > > > +	struct drm_display_mode *pipe_mode = &crtc_state->hw.pipe_mode;
> > > > +
> > > >  	encoder->get_config(encoder, crtc_state);
> > > > +
> > > > +	*pipe_mode = crtc_state->hw.adjusted_mode;
> > > >  }
> > > >  
> > > >  static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state)
> > > > @@ -8235,7 +8237,7 @@ static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state)
> > > >  	if (HAS_GMCH(dev_priv))
> > > >  		/* FIXME calculate proper pipe pixel rate for GMCH pfit */
> > > >  		crtc_state->pixel_rate =
> > > > -			crtc_state->hw.adjusted_mode.crtc_clock;
> > > > +			crtc_state->hw.pipe_mode.crtc_clock;
> > > >  	else
> > > >  		crtc_state->pixel_rate =
> > > >  			ilk_pipe_pixel_rate(crtc_state);
> > > > @@ -8245,9 +8247,11 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
> > > >  				     struct intel_crtc_state *pipe_config)
> > > >  {
> > > >  	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > > > -	const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
> > > > +	struct drm_display_mode *pipe_mode = &pipe_config->hw.pipe_mode;
> > > >  	int clock_limit = dev_priv->max_dotclk_freq;
> > > >  
> > > > +	*pipe_mode = pipe_config->hw.adjusted_mode;
> > > 
> > > That will now overwrite whatever the encoder computed in
> > > .compute_config(). Wasn't that where we wanted to do it for actual
> > > bigjoiner, or was that going to be somewhere else?
> > 
> > We compute the pipe mode for bigjoiner in this function:
> > 
> > static int intel_crtc_compute_config(struct intel_crtc *crtc,
> >                                      struct intel_crtc_state *pipe_config)
> > {
> >         struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> >         struct drm_display_mode *pipe_mode = &pipe_config->hw.pipe_mode;
> >         int clock_limit = dev_priv->max_dotclk_freq;
> > 
> >         *pipe_mode = pipe_config->hw.adjusted_mode;
> > 
> >         /* Adjust pipe_mode for bigjoiner, with half the horizontal mode */
> >         if (pipe_config->bigjoiner) {
> >                 pipe_mode->crtc_clock /= 2;
> >                 pipe_mode->crtc_hdisplay /= 2;
> >                 pipe_mode->crtc_hblank_start /= 2;
> >                 pipe_mode->crtc_hblank_end /= 2;
> >                 pipe_mode->crtc_hsync_start /= 2;
> >                 pipe_mode->crtc_hsync_end /= 2;
> >                 pipe_mode->crtc_htotal /= 2;
> >                 pipe_mode->crtc_hskew /= 2;
> >                 pipe_config->pipe_src_w /= 2;
> >         }
> > 
> > So thats why in this patch we just add *pipe_mode = pipe_config->hw.adjusted_mode; the actual big joiner stuff gets added
> > in the core big joiner patch : https://patchwork.freedesktop.org/patch/398457/?series=83379&rev=1
> 
> OK. In that case this seems fine. Just a bit worried we might need
> pipe_mode already before this, in which case doing it earlier would
> be required. But we can cross that bridge if/when we come to it.
> 
> > 
> > 
> > > 
> > > An alternative would be to do this before .compute_config() +
> > > also in intel_fixed_panel_mode() for eDP/etc.
> > > 
> > > > +
> > > >  	if (INTEL_GEN(dev_priv) < 4) {
> > > >  		clock_limit = dev_priv->max_cdclk_freq * 9 / 10;
> > > >  
> > > > @@ -8256,16 +8260,16 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
> > > >  		 * is > 90% of the (display) core speed.
> > > >  		 */
> > > >  		if (intel_crtc_supports_double_wide(crtc) &&
> > > > -		    adjusted_mode->crtc_clock > clock_limit) {
> > > > +		    pipe_mode->crtc_clock > clock_limit) {
> > > >  			clock_limit = dev_priv->max_dotclk_freq;
> > > >  			pipe_config->double_wide = true;
> > > >  		}
> > > >  	}
> > > >  
> > > > -	if (adjusted_mode->crtc_clock > clock_limit) {
> > > > +	if (pipe_mode->crtc_clock > clock_limit) {
> > > >  		drm_dbg_kms(&dev_priv->drm,
> > > >  			    "requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
> > > > -			    adjusted_mode->crtc_clock, clock_limit,
> > > > +			    pipe_mode->crtc_clock, clock_limit,
> > > >  			    yesno(pipe_config->double_wide));
> > > >  		return -EINVAL;
> > > >  	}
> > > > @@ -8308,7 +8312,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
> > > >  	 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
> > > >  	 */
> > > >  	if ((INTEL_GEN(dev_priv) > 4 || IS_G4X(dev_priv)) &&
> > > > -		adjusted_mode->crtc_hsync_start == adjusted_mode->crtc_hdisplay)
> > > > +	    pipe_mode->crtc_hsync_start == pipe_mode->crtc_hdisplay)
> > > >  		return -EINVAL;
> > > >  
> > > >  	intel_crtc_compute_pixel_rate(pipe_config);
> > > > @@ -12827,15 +12831,15 @@ static bool c8_planes_changed(const struct intel_crtc_state *new_crtc_state)
> > > >  
> > > >  static u16 hsw_linetime_wm(const struct intel_crtc_state *crtc_state)
> > > >  {
> > > > -	const struct drm_display_mode *adjusted_mode =
> > > > -		&crtc_state->hw.adjusted_mode;
> > > > +	const struct drm_display_mode *pipe_mode =
> > > > +		&crtc_state->hw.pipe_mode;
> > > >  	int linetime_wm;
> > > >  
> > > >  	if (!crtc_state->hw.enable)
> > > >  		return 0;
> > > >  
> > > > -	linetime_wm = DIV_ROUND_CLOSEST(adjusted_mode->crtc_htotal * 1000 * 8,
> > > > -					adjusted_mode->crtc_clock);
> > > > +	linetime_wm = DIV_ROUND_CLOSEST(pipe_mode->crtc_htotal * 1000 * 8,
> > > > +					pipe_mode->crtc_clock);
> > > >  
> > > >  	return min(linetime_wm, 0x1ff);
> > > >  }
> > > > @@ -13322,7 +13326,10 @@ static void intel_dump_pipe_config(const struct intel_crtc_state *pipe_config,
> > > >  	drm_mode_debug_printmodeline(&pipe_config->hw.mode);
> > > >  	drm_dbg_kms(&dev_priv->drm, "adjusted mode:\n");
> > > >  	drm_mode_debug_printmodeline(&pipe_config->hw.adjusted_mode);
> > > > +	drm_dbg_kms(&dev_priv->drm, "pipe mode:\n");
> > > > +	drm_mode_debug_printmodeline(&pipe_config->hw.pipe_mode);
> > > >  	intel_dump_crtc_timings(dev_priv, &pipe_config->hw.adjusted_mode);
> > > > +	intel_dump_crtc_timings(dev_priv, &pipe_config->hw.pipe_mode);
> > > >  	drm_dbg_kms(&dev_priv->drm,
> > > >  		    "port clock: %d, pipe src size: %dx%d, pixel rate %d\n",
> > > >  		    pipe_config->port_clock,
> > > > @@ -13465,8 +13472,9 @@ intel_crtc_copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)
> > > >  	crtc_state->hw.enable = crtc_state->uapi.enable;
> > > >  	crtc_state->hw.active = crtc_state->uapi.active;
> > > >  	crtc_state->hw.mode = crtc_state->uapi.mode;
> > > > -	crtc_state->hw.adjusted_mode = crtc_state->uapi.adjusted_mode;
> > > > +	crtc_state->hw.pipe_mode = crtc_state->hw.adjusted_mode = crtc_state->uapi.adjusted_mode;
> > > >  	crtc_state->hw.scaling_filter = crtc_state->uapi.scaling_filter;
> > > > +
> > > >  	intel_crtc_copy_uapi_to_hw_state_nomodeset(crtc_state);
> > > >  }
> > > >  
> > > > @@ -13663,6 +13671,9 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
> > > >  		    "hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
> > > >  		    base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
> > > >  
> > > > +	/* without bigjoiner, pipe_mode == adjusted_mode */
> > > > +	pipe_config->hw.pipe_mode = pipe_config->hw.adjusted_mode;
> > > > +
> > > >  	return 0;
> > > >  }
> > > >  
> > > > @@ -14071,6 +14082,10 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
> > > >  
> > > >  	PIPE_CONF_CHECK_X(output_types);
> > > >  
> > > > +	PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_hdisplay);
> > > > +	PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_hdisplay);
> > > > +	PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_hdisplay);
> > > > +	PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_hdisplay);
> > > >  	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hdisplay);
> > > >  	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_htotal);
> > > >  	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hblank_start);
> > > > @@ -18920,6 +18935,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
> > > >  			 */
> > > >  			crtc_state->inherited = true;
> > > >  
> > > > +			crtc_state->hw.pipe_mode = crtc_state->hw.adjusted_mode;
> > > > +
> > > 
> > > Isn't this redundant now?
> > 
> > Why is this redundant? I think we need this because then intel_crtc_compute_pixel_rate() call actually uses pipe_mode
> > for getting pixel rate.
> 
> intel_encoder_get_config() already did the copy no?
> 
> Hmm. But there is the possibility of BIOS enabling pipes w/o
> encoders on older platforms. We may need the extra copy for those.
> IIRC we already have some special handling for that in the
> .get_pipe_config() implementations, so maybe the pipe_mode copy
> should be there as well...
> 
> Or, maybe we actually want a intel_crtc_get_pipe_config() wrapper
> similar to the intel_encoder_get_config() one you're adding,
> which would also do the same copy for us. This might be the
> cleanest approach.
>

Okay yes I can create a new intel_crtc_get_config() something like below:

static bool intel_crtc_get_pipe_config()
{
	dev_priv->display.get_pipe_config(crtc, pipe_config);
	pipe_config->hw.pipe_mode = crtc_state->hw.adjusted_mode;
}

Looks fine right?

Manasi

} 
> 
> > 
> > Manasi
> > 
> > 
> > > 
> > > >  			intel_crtc_compute_pixel_rate(crtc_state);
> > > >  
> > > >  			intel_crtc_update_active_timings(crtc_state);
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> > > > index f6f0626649e0..b526afee595c 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > > > @@ -817,15 +817,22 @@ struct intel_crtc_state {
> > > >  	 * The following members are used to verify the hardware state:
> > > >  	 * - enable
> > > >  	 * - active
> > > > -	 * - mode / adjusted_mode
> > > > +	 * - mode/adjusted_mode
> > > >  	 * - color property blobs.
> > > >  	 *
> > > >  	 * During initial hw readout, they need to be copied to uapi.
> > > > +	 *
> > > > +	 * Bigjoiner will allow a transcoder mode that spans 2 pipes;
> > > > +	 * Use the pipe_mode for calculations like watermarks, pipe
> > > > +	 * scaler, and bandwidth.
> > > > +	 *
> > > > +	 * Use adjusted_mode for things that need to know the full
> > > > +	 * mode on the transcoder, which spans all pipes.
> > > >  	 */
> > > >  	struct {
> > > >  		bool active, enable;
> > > >  		struct drm_property_blob *degamma_lut, *gamma_lut, *ctm;
> > > > -		struct drm_display_mode mode, adjusted_mode;
> > > > +		struct drm_display_mode mode, pipe_mode, adjusted_mode;
> > > >  		enum drm_scaling_filter scaling_filter;
> > > >  	} hw;
> > > >  
> > > > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> > > > index f54375b11964..9898c257d3e0 100644
> > > > --- a/drivers/gpu/drm/i915/intel_pm.c
> > > > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > > > @@ -899,12 +899,12 @@ static void pnv_update_wm(struct intel_crtc *unused_crtc)
> > > >  
> > > >  	crtc = single_enabled_crtc(dev_priv);
> > > >  	if (crtc) {
> > > > -		const struct drm_display_mode *adjusted_mode =
> > > > -			&crtc->config->hw.adjusted_mode;
> > > > +		const struct drm_display_mode *pipe_mode =
> > > > +			&crtc->config->hw.pipe_mode;
> > > >  		const struct drm_framebuffer *fb =
> > > >  			crtc->base.primary->state->fb;
> > > >  		int cpp = fb->format->cpp[0];
> > > > -		int clock = adjusted_mode->crtc_clock;
> > > > +		int clock = pipe_mode->crtc_clock;
> > > >  
> > > >  		/* Display SR */
> > > >  		wm = intel_calculate_wm(clock, &pnv_display_wm,
> > > > @@ -1135,8 +1135,8 @@ static u16 g4x_compute_wm(const struct intel_crtc_state *crtc_state,
> > > >  {
> > > >  	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
> > > >  	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> > > > -	const struct drm_display_mode *adjusted_mode =
> > > > -		&crtc_state->hw.adjusted_mode;
> > > > +	const struct drm_display_mode *pipe_mode =
> > > > +		&crtc_state->hw.pipe_mode;
> > > >  	unsigned int latency = dev_priv->wm.pri_latency[level] * 10;
> > > >  	unsigned int clock, htotal, cpp, width, wm;
> > > >  
> > > > @@ -1163,8 +1163,8 @@ static u16 g4x_compute_wm(const struct intel_crtc_state *crtc_state,
> > > >  	    level != G4X_WM_LEVEL_NORMAL)
> > > >  		cpp = max(cpp, 4u);
> > > >  
> > > > -	clock = adjusted_mode->crtc_clock;
> > > > -	htotal = adjusted_mode->crtc_htotal;
> > > > +	clock = pipe_mode->crtc_clock;
> > > > +	htotal = pipe_mode->crtc_htotal;
> > > >  
> > > >  	width = drm_rect_width(&plane_state->uapi.dst);
> > > >  
> > > > @@ -1660,8 +1660,8 @@ static u16 vlv_compute_wm_level(const struct intel_crtc_state *crtc_state,
> > > >  {
> > > >  	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
> > > >  	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> > > > -	const struct drm_display_mode *adjusted_mode =
> > > > -		&crtc_state->hw.adjusted_mode;
> > > > +	const struct drm_display_mode *pipe_mode =
> > > > +		&crtc_state->hw.pipe_mode;
> > > >  	unsigned int clock, htotal, cpp, width, wm;
> > > >  
> > > >  	if (dev_priv->wm.pri_latency[level] == 0)
> > > > @@ -1671,8 +1671,8 @@ static u16 vlv_compute_wm_level(const struct intel_crtc_state *crtc_state,
> > > >  		return 0;
> > > >  
> > > >  	cpp = plane_state->hw.fb->format->cpp[0];
> > > > -	clock = adjusted_mode->crtc_clock;
> > > > -	htotal = adjusted_mode->crtc_htotal;
> > > > +	clock = pipe_mode->crtc_clock;
> > > > +	htotal = pipe_mode->crtc_htotal;
> > > >  	width = crtc_state->pipe_src_w;
> > > >  
> > > >  	if (plane->id == PLANE_CURSOR) {
> > > > @@ -2261,12 +2261,12 @@ static void i965_update_wm(struct intel_crtc *unused_crtc)
> > > >  	if (crtc) {
> > > >  		/* self-refresh has much higher latency */
> > > >  		static const int sr_latency_ns = 12000;
> > > > -		const struct drm_display_mode *adjusted_mode =
> > > > -			&crtc->config->hw.adjusted_mode;
> > > > +		const struct drm_display_mode *pipe_mode =
> > > > +			&crtc->config->hw.pipe_mode;
> > > >  		const struct drm_framebuffer *fb =
> > > >  			crtc->base.primary->state->fb;
> > > > -		int clock = adjusted_mode->crtc_clock;
> > > > -		int htotal = adjusted_mode->crtc_htotal;
> > > > +		int clock = pipe_mode->crtc_clock;
> > > > +		int htotal = pipe_mode->crtc_htotal;
> > > >  		int hdisplay = crtc->config->pipe_src_w;
> > > >  		int cpp = fb->format->cpp[0];
> > > >  		int entries;
> > > > @@ -2345,8 +2345,8 @@ static void i9xx_update_wm(struct intel_crtc *unused_crtc)
> > > >  	fifo_size = dev_priv->display.get_fifo_size(dev_priv, PLANE_A);
> > > >  	crtc = intel_get_crtc_for_plane(dev_priv, PLANE_A);
> > > >  	if (intel_crtc_active(crtc)) {
> > > > -		const struct drm_display_mode *adjusted_mode =
> > > > -			&crtc->config->hw.adjusted_mode;
> > > > +		const struct drm_display_mode *pipe_mode =
> > > > +			&crtc->config->hw.pipe_mode;
> > > >  		const struct drm_framebuffer *fb =
> > > >  			crtc->base.primary->state->fb;
> > > >  		int cpp;
> > > > @@ -2356,7 +2356,7 @@ static void i9xx_update_wm(struct intel_crtc *unused_crtc)
> > > >  		else
> > > >  			cpp = fb->format->cpp[0];
> > > >  
> > > > -		planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
> > > > +		planea_wm = intel_calculate_wm(pipe_mode->crtc_clock,
> > > >  					       wm_info, fifo_size, cpp,
> > > >  					       pessimal_latency_ns);
> > > >  		enabled = crtc;
> > > > @@ -2372,8 +2372,8 @@ static void i9xx_update_wm(struct intel_crtc *unused_crtc)
> > > >  	fifo_size = dev_priv->display.get_fifo_size(dev_priv, PLANE_B);
> > > >  	crtc = intel_get_crtc_for_plane(dev_priv, PLANE_B);
> > > >  	if (intel_crtc_active(crtc)) {
> > > > -		const struct drm_display_mode *adjusted_mode =
> > > > -			&crtc->config->hw.adjusted_mode;
> > > > +		const struct drm_display_mode *pipe_mode =
> > > > +			&crtc->config->hw.pipe_mode;
> > > >  		const struct drm_framebuffer *fb =
> > > >  			crtc->base.primary->state->fb;
> > > >  		int cpp;
> > > > @@ -2383,7 +2383,7 @@ static void i9xx_update_wm(struct intel_crtc *unused_crtc)
> > > >  		else
> > > >  			cpp = fb->format->cpp[0];
> > > >  
> > > > -		planeb_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
> > > > +		planeb_wm = intel_calculate_wm(pipe_mode->crtc_clock,
> > > >  					       wm_info, fifo_size, cpp,
> > > >  					       pessimal_latency_ns);
> > > >  		if (enabled == NULL)
> > > > @@ -2421,12 +2421,12 @@ static void i9xx_update_wm(struct intel_crtc *unused_crtc)
> > > >  	if (HAS_FW_BLC(dev_priv) && enabled) {
> > > >  		/* self-refresh has much higher latency */
> > > >  		static const int sr_latency_ns = 6000;
> > > > -		const struct drm_display_mode *adjusted_mode =
> > > > -			&enabled->config->hw.adjusted_mode;
> > > > +		const struct drm_display_mode *pipe_mode =
> > > > +			&enabled->config->hw.pipe_mode;
> > > >  		const struct drm_framebuffer *fb =
> > > >  			enabled->base.primary->state->fb;
> > > > -		int clock = adjusted_mode->crtc_clock;
> > > > -		int htotal = adjusted_mode->crtc_htotal;
> > > > +		int clock = pipe_mode->crtc_clock;
> > > > +		int htotal = pipe_mode->crtc_htotal;
> > > >  		int hdisplay = enabled->config->pipe_src_w;
> > > >  		int cpp;
> > > >  		int entries;
> > > > @@ -2474,7 +2474,7 @@ static void i845_update_wm(struct intel_crtc *unused_crtc)
> > > >  {
> > > >  	struct drm_i915_private *dev_priv = to_i915(unused_crtc->base.dev);
> > > >  	struct intel_crtc *crtc;
> > > > -	const struct drm_display_mode *adjusted_mode;
> > > > +	const struct drm_display_mode *pipe_mode;
> > > >  	u32 fwater_lo;
> > > >  	int planea_wm;
> > > >  
> > > > @@ -2482,8 +2482,8 @@ static void i845_update_wm(struct intel_crtc *unused_crtc)
> > > >  	if (crtc == NULL)
> > > >  		return;
> > > >  
> > > > -	adjusted_mode = &crtc->config->hw.adjusted_mode;
> > > > -	planea_wm = intel_calculate_wm(adjusted_mode->crtc_clock,
> > > > +	pipe_mode = &crtc->config->hw.pipe_mode;
> > > > +	planea_wm = intel_calculate_wm(pipe_mode->crtc_clock,
> > > >  				       &i845_wm_info,
> > > >  				       dev_priv->display.get_fifo_size(dev_priv, PLANE_A),
> > > >  				       4, pessimal_latency_ns);
> > > > @@ -2573,7 +2573,7 @@ static u32 ilk_compute_pri_wm(const struct intel_crtc_state *crtc_state,
> > > >  		return method1;
> > > >  
> > > >  	method2 = ilk_wm_method2(crtc_state->pixel_rate,
> > > > -				 crtc_state->hw.adjusted_mode.crtc_htotal,
> > > > +				 crtc_state->hw.pipe_mode.crtc_htotal,
> > > >  				 drm_rect_width(&plane_state->uapi.dst),
> > > >  				 cpp, mem_value);
> > > >  
> > > > @@ -2601,7 +2601,7 @@ static u32 ilk_compute_spr_wm(const struct intel_crtc_state *crtc_state,
> > > >  
> > > >  	method1 = ilk_wm_method1(crtc_state->pixel_rate, cpp, mem_value);
> > > >  	method2 = ilk_wm_method2(crtc_state->pixel_rate,
> > > > -				 crtc_state->hw.adjusted_mode.crtc_htotal,
> > > > +				 crtc_state->hw.pipe_mode.crtc_htotal,
> > > >  				 drm_rect_width(&plane_state->uapi.dst),
> > > >  				 cpp, mem_value);
> > > >  	return min(method1, method2);
> > > > @@ -2626,7 +2626,7 @@ static u32 ilk_compute_cur_wm(const struct intel_crtc_state *crtc_state,
> > > >  	cpp = plane_state->hw.fb->format->cpp[0];
> > > >  
> > > >  	return ilk_wm_method2(crtc_state->pixel_rate,
> > > > -			      crtc_state->hw.adjusted_mode.crtc_htotal,
> > > > +			      crtc_state->hw.pipe_mode.crtc_htotal,
> > > >  			      drm_rect_width(&plane_state->uapi.dst),
> > > >  			      cpp, mem_value);
> > > >  }
> > > > @@ -3883,7 +3883,7 @@ static bool skl_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
> > > >  	if (!crtc_state->hw.active)
> > > >  		return true;
> > > >  
> > > > -	if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
> > > > +	if (crtc_state->hw.pipe_mode.flags & DRM_MODE_FLAG_INTERLACE)
> > > >  		return false;
> > > >  
> > > >  	intel_atomic_crtc_state_for_each_plane_state(plane, plane_state, crtc_state) {
> > > > @@ -4174,8 +4174,8 @@ skl_ddb_get_pipe_allocation_limits(struct drm_i915_private *dev_priv,
> > > >  	 */
> > > >  	total_slice_mask = dbuf_slice_mask;
> > > >  	for_each_new_intel_crtc_in_state(intel_state, crtc, crtc_state, i) {
> > > > -		const struct drm_display_mode *adjusted_mode =
> > > > -			&crtc_state->hw.adjusted_mode;
> > > > +		const struct drm_display_mode *pipe_mode =
> > > > +			&crtc_state->hw.pipe_mode;
> > > >  		enum pipe pipe = crtc->pipe;
> > > >  		int hdisplay, vdisplay;
> > > >  		u32 pipe_dbuf_slice_mask;
> > > > @@ -4205,7 +4205,7 @@ skl_ddb_get_pipe_allocation_limits(struct drm_i915_private *dev_priv,
> > > >  		if (dbuf_slice_mask != pipe_dbuf_slice_mask)
> > > >  			continue;
> > > >  
> > > > -		drm_mode_get_hv_timing(adjusted_mode, &hdisplay, &vdisplay);
> > > > +		drm_mode_get_hv_timing(pipe_mode, &hdisplay, &vdisplay);
> > > >  
> > > >  		total_width_in_range += hdisplay;
> > > >  
> > > > @@ -5093,7 +5093,7 @@ intel_get_linetime_us(const struct intel_crtc_state *crtc_state)
> > > >  	if (drm_WARN_ON(&dev_priv->drm, pixel_rate == 0))
> > > >  		return u32_to_fixed16(0);
> > > >  
> > > > -	crtc_htotal = crtc_state->hw.adjusted_mode.crtc_htotal;
> > > > +	crtc_htotal = crtc_state->hw.pipe_mode.crtc_htotal;
> > > >  	linetime_us = div_fixed16(crtc_htotal * 1000, pixel_rate);
> > > >  
> > > >  	return linetime_us;
> > > > @@ -5282,14 +5282,14 @@ static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
> > > >  	method1 = skl_wm_method1(dev_priv, wp->plane_pixel_rate,
> > > >  				 wp->cpp, latency, wp->dbuf_block_size);
> > > >  	method2 = skl_wm_method2(wp->plane_pixel_rate,
> > > > -				 crtc_state->hw.adjusted_mode.crtc_htotal,
> > > > +				 crtc_state->hw.pipe_mode.crtc_htotal,
> > > >  				 latency,
> > > >  				 wp->plane_blocks_per_line);
> > > >  
> > > >  	if (wp->y_tiled) {
> > > >  		selected_result = max_fixed16(method2, wp->y_tile_minimum);
> > > >  	} else {
> > > > -		if ((wp->cpp * crtc_state->hw.adjusted_mode.crtc_htotal /
> > > > +		if ((wp->cpp * crtc_state->hw.pipe_mode.crtc_htotal /
> > > >  		     wp->dbuf_block_size < 1) &&
> > > >  		     (wp->plane_bytes_per_line / wp->dbuf_block_size < 1)) {
> > > >  			selected_result = method2;
> > > > -- 
> > > > 2.19.1
> > > > 
> > > > _______________________________________________
> > > > Intel-gfx mailing list
> > > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > > 
> > > -- 
> > > Ville Syrjälä
> > > Intel
> 
> -- 
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux