== Series Details == Series: drm/i915: Futher cleanup around hpd pins and port identfiers (rev5) URL : https://patchwork.freedesktop.org/series/82411/ State : warning == Summary == $ dim checkpatch origin/drm-tip ee08af3a4155 drm/i915: s/PORT_TC/TC_PORT_/ -:313: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'tc_port' - possible side-effects? #313: FILE: drivers/gpu/drm/i915/i915_reg.h:10330: +#define ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port) (1 << ((tc_port) < TC_PORT_4 ? \ (tc_port) + 12 : \ + (tc_port) - TC_PORT_4 + 21)) total: 0 errors, 0 warnings, 1 checks, 269 lines checked fe19b59abf59 drm/i915: Add PORT_TCn aliases to enum port 287c7226cbc0 drm/i915: Give DDI encoders even better names -:44: WARNING:LONG_LINE: line length of 102 exceeds 100 columns #44: FILE: drivers/gpu/drm/i915/display/intel_ddi.c:5186: + tc_port != TC_PORT_NONE ? phy_name(phy) : tc_port - TC_PORT_1 + '1'); -:54: WARNING:LONG_LINE: line length of 102 exceeds 100 columns #54: FILE: drivers/gpu/drm/i915/display/intel_ddi.c:5196: + tc_port != TC_PORT_NONE ? phy_name(phy) : tc_port - TC_PORT_1 + '1'); total: 0 errors, 2 warnings, 0 checks, 33 lines checked 5b31fc7d2973 drm/i915: Introduce AUX_CH_USBCn 907a6f378413 drm/i915: Pimp AUX CH names cb0bc14e42f1 drm/i915: Use AUX_CH_USBCn for the RKL VBT AUX CH setup 00239142669f drm/i915: Parametrize BXT_DE_PORT_HP_DDI with hpd_pin 4a178195598a drm/i915: Introduce GEN8_DE_PORT_HOTPLUG() 60ce87b4b638 drm/i915: s/port/hpd_pin/ for icp+ ddi hpd bits 6d636206aba9 drm/i915: s/tc_port/hpd_pin/ in GEN11_{TC, TBT}_HOTPLUG() 8b3e20e749bc drm/i915: s/tc_port/hpd_pin/ in icp+ TC hotplug bits 15e7a4125c07 drm/i915: Relocate intel_hpd_{enabled, hotplug}_irqs() 2cecffb1a88e drm/i915: Split gen11_hpd_detection_setup() into tc vs. tbt variants 62b52af3a1fc drm/i915: Don't enable hpd detection logic from irq_postinstall() 567b2cbf4a84 drm/i915: Rename 'tmp_mask' 26e100e104d0 drm/i915: Remove the per-plaform IIR HPD masking 3059c7ee9196 drm/i915: Enable hpd logic only for ports that are present f2def9dff59f drm/i915: Use GEN3_IRQ_INIT() to init south interrupts in icp+ bd3fd9cc28ab drm/i915: Get rid of ibx_irq_pre_postinstall() _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
