HP DreamColor panel needs to be controlled via AUX interface. However,
it has both DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP and
DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP set, so it fails to pass
intel_dp_aux_display_control_capable() test.
Skip the test if the panel has force DPCD quirk.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
index acbd7eb66cbe..acf2e1c65290 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
@@ -347,9 +347,13 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
struct intel_panel *panel = &intel_connector->panel;
struct intel_dp *intel_dp = enc_to_intel_dp(intel_connector->encoder);
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+ bool force_dpcd;
+
+ force_dpcd = drm_dp_has_quirk(&intel_dp->desc, intel_dp->edid_quirks,
+ DP_QUIRK_FORCE_DPCD_BACKLIGHT);
if (i915->params.enable_dpcd_backlight == 0 ||
- !intel_dp_aux_display_control_capable(intel_connector))
+ (!force_dpcd && !intel_dp_aux_display_control_capable(intel_connector)))
return -ENODEV;
/*
@@ -358,9 +362,7 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
*/
if (i915->vbt.backlight.type !=
INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE &&
- i915->params.enable_dpcd_backlight != 1 &&
- !drm_dp_has_quirk(&intel_dp->desc, intel_dp->edid_quirks,
- DP_QUIRK_FORCE_DPCD_BACKLIGHT)) {
+ i915->params.enable_dpcd_backlight != 1 && !force_dpcd) {
drm_info(&i915->drm,
"Panel advertises DPCD backlight support, but "
"VBT disagrees. If your backlight controls "
--
2.17.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
