Re: [PATCH 3/4] drm/i915/gt: Always send a pulse down the engine after disabling heartbeat

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Tvrtko Ursulin (2020-09-25 14:19:22)
> 
> On 25/09/2020 11:01, Chris Wilson wrote:
> > Quoting Tvrtko Ursulin (2020-09-24 14:43:08)
> >>
> >> On 16/09/2020 10:42, Chris Wilson wrote:
> >>> Currently, we check we can send a pulse prior to disabling the
> >>> heartbeat to verify that we can change the heartbeat, but since we may
> >>> re-evaluate execution upon changing the heartbeat interval we need another
> >>> pulse afterwards to refresh execution.
> >>>
> >>> Fixes: 9a40bddd47ca ("drm/i915/gt: Expose heartbeat interval via sysfs")
> >>> Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> >>> Cc: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
> >>> Cc: <stable@xxxxxxxxxxxxxxx> # v5.7+
> >>> ---
> >>>    drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c | 6 ++++--
> >>>    1 file changed, 4 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c b/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c
> >>> index 8ffdf676c0a0..d09df370f7cd 100644
> >>> --- a/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c
> >>> +++ b/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c
> >>> @@ -192,10 +192,12 @@ int intel_engine_set_heartbeat(struct intel_engine_cs *engine,
> >>>        WRITE_ONCE(engine->props.heartbeat_interval_ms, delay);
> >>>    
> >>>        if (intel_engine_pm_get_if_awake(engine)) {
> >>> -             if (delay)
> >>> +             if (delay) {
> >>>                        intel_engine_unpark_heartbeat(engine);
> >>> -             else
> >>> +             } else {
> >>>                        intel_engine_park_heartbeat(engine);
> >>> +                     intel_engine_pulse(engine); /* recheck execution */
> >>> +             }
> >>>                intel_engine_pm_put(engine);
> >>>        }
> >>>    
> >>>
> >>
> >> I did not immediately get this one. Do we really need two pulses or
> >> maybe we could re-order the code a bit and just undo the heartbeat park
> >> if pulse after parking did not work?
> > 
> > We use the first pulse to determine if it's legal for the parameter to
> > be changed (checking we support the preemptive pulse to remove
> > non-persistent contexts). Then the second pulse after changing the
> > parameter to flush the changes through.
> > 
> > I like checking for support before making the change, although we could
> > try and fixup after failure, there would still be a window where the
> > change would be visible to the system. We don't need to use the pulse per
> > se for that check, that's pure convenience as it performs the checking
> > already.
> 
> Hm second pulse also has a problem that sneaky user can nerf it with a 
> precisely timed SIGINT on itself. It's a bit ridiculous isn't it? :)

Sufficient pause for concern. In both this and the kill_context path, we
are using the pulse to evict hostile contexts, that could be reasonable
grounds to have the pulse not be interrupted.
 
> Have engine preemption check open coded first and uninterruptible 
> flavour of pulse sending? It's also not good since we do want it to be 
> interruptible..

Right, allowing it to be interruptible does ensure we have an escape
plan. That escape plan is often invaluable. :|

> Unwind the change and report error back to write(2) if 
> intel_engine_pulse failed for any reason?

The concern then is how atomic do we want the change to appear to be.
Would it be sufficient to only rollback after error if the value still
matches (multiple users), cmpxchg for paranoia. Then anything that
observes the intermediate value will just have to obey the new rules
temporarily, as they would have to in future if the change succeeded.

	new = strtoull_from_user();
	/* validate new */

	old = xchg(&heartbeat, new);
	/* apply changes */
	if (err)
		cmpxchg(&heartbeat, new, old);

If heartbeat is changed in the interval, the pulse either uses the new
or the new-new value, fail/pass regardless. That could mean we report an
error for another heartbeat value from a second user. That's arguing for
a mutex guard for the sysfs writes.
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux