cc back a few others who were unintentionally dropped from the thread earlier. Someone (at Google) helped me dig into this a little more and they found a document titled "eDP Backlight Brightness bit alignment" sent out for review in January 2017. I registered for a new account (google is a member) and have access to the document; here is the URL for those who also have access: https://groups.vesa.org/wg/AllMem/document/7786. For what it's worth, it seems like Lyude's contact Bill Lempesis uploaded this change-request document, so I think we can reach out to him if we have further questions. It's actually unclear to me what the status of this change request is, and whether it's been officially accepted. But I think it can be seen as some official advice on how we can move forward here. Basically, this is a change request to the spec which acknowledges that, despite the original spec implying that the most-significant-bits were relevant here, many implementations used the least-significant-bits. In defense of most-significant it laid out some similar arguments to what Ville was saying. But it ends up saying: > Unfortunately, the most common interpretation that we have > encountered is case 1 in the example above. TCON vendors > tend to align the valid bits to the LSBs, not the MSBs. Instead of changing the default defined functionality (as some earlier version of this doc apparently suggested), this doc prefers to allocate two extra bits in EDP_GENERAL_CAPABILITY_2 so that future backlight devices can specify to the Source how to program them: 00: the current functionality, i,e. no defined interpretation 01: aligned to most-significant bits 10: aligned to least-significant bits 11: reserved It also says "[Sources] should only need panel-specific workarounds for the currently available panels." So I believe this document is an acknowledgement of many implementations having their alignment to the least-significant bits, and (to my eyes) clearly validates that the spec "should" be the opposite. If we believe the doc's claim that "the most common interpretation" is least-significant, it seems to me that it would require more quirks if we made most-significant the default implementation. Ville mentioned at some point earlier that we should try to match the spec, whereas Lyude mentioned we should prefer to do what the majority of machines do. What do you both think of this new development? I will also look into whether my specific device supports this extension, and in that case I'll volunteer to implement this new functionality in the driver. Thanks for your time, Kevin On Tue, Sep 22, 2020 at 3:30 PM Lyude Paul <lyude@xxxxxxxxxx> wrote: > > Hi! Since I got dropped from the thread, many responses inline > > On Tue, 2020-09-22 at 12:58 -0700, Puthikorn Voravootivat wrote: > > +Lyude > > I notice that Lyude email was somehow dropped from the thread. > > Lyude was the person who submitted the patch for Thinkpad and should > > know the OUI of the panel. > > no need - currently because of some confusion that got caused by the Intel HDR > backlight interface being the only backlight interface that works properly on > a lot of panels (many panels will advertise both interfaces, but might only > work with the Intel one), we actually rely on a small allowlist of "approved" > panels for enabling DPCD backlight control. > > …however, many of these panels are annoying and don't actually provide a > reliable enough OUID to use for quirk detection, which is why we had to add > EDID quirk detection as a temporary workaround for this. The current list of > panels lives in drm_dp_helper.c: > > /* > * Some devices have unreliable OUIDs where they don't set the device ID > * correctly, and as a result we need to use the EDID for finding additional > * DP quirks in such cases. > */ > static const struct edid_quirk edid_quirk_list[] = { > /* Optional 4K AMOLED panel in the ThinkPad X1 Extreme 2nd Generation > * only supports DPCD backlight controls > */ > { MFG(0x4c, 0x83), PROD_ID(0x41, 0x41), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, > /* > * Some Dell CML 2020 systems have panels support both AUX and PWM > * backlight control, and some only support AUX backlight control. All > * said panels start up in AUX mode by default, and we don't have any > * support for disabling HDR mode on these panels which would be > * required to switch to PWM backlight control mode (plus, I'm not > * even sure we want PWM backlight controls over DPCD backlight > * controls anyway...). Until we have a better way of detecting these, > * force DPCD backlight mode on all of them. > */ > { MFG(0x06, 0xaf), PROD_ID(0x9b, 0x32), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, > { MFG(0x06, 0xaf), PROD_ID(0xeb, 0x41), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, > { MFG(0x4d, 0x10), PROD_ID(0xc7, 0x14), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, > { MFG(0x4d, 0x10), PROD_ID(0xe6, 0x14), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, > { MFG(0x4c, 0x83), PROD_ID(0x47, 0x41), BIT(DP_QUIRK_FORCE_DPCD_BACKLIGHT) }, > }; > > Also note that I think just about every panel on that list supports the Intel > HDR backlight interface, so it's -possible- that the VESA interface could be > broken on these panels. But, that would be a lot of different panels from > different vendors to all be broken in the same way. > > > > > On Tue, Sep 22, 2020 at 11:47 AM Kevin Chowski <chowski@xxxxxxxxxxxx> wrote: > > > Alrighty, I'll take everyone else's silence as tacit approval of > > > Ville's opinions. (I didn't receive any email bounces this time, so I > > > think my issue was transient.) I will start on inverting the quirk and > > > making the most-significant-alignment matter for these registers by > > > default. > > > > > > Who can help me gather a list of OUIs that we need to add to the > > > quirk? I can follow up with Puthikorn about the relevant Chromebooks, > > > but I don't know what other types of laptops are using this driver. > > > > > > Thanks for your time, > > > Kevin Chowski > > > > > > > > > On Fri, Sep 18, 2020 at 12:16 PM Puthikorn Voravootivat > > > <puthik@xxxxxxxxxxxx> wrote: > > > > I'll defer to Ville & Lyude. > > > > > > > > I dug up more on the bug report and found that both Thinkpad and > > > > Galaxy Chromebook use the same Samsung OLED. > > > > So my 2 vs 1 argument is actually not valid. > > > > > > > > On Fri, Sep 18, 2020 at 10:59 AM Kevin Chowski <chowski@xxxxxxxxxxxx> > > > > wrote: > > > > > Apologies once again, some of my emails were bouncing for some > > > > > addresses yesterday. Hopefully it was a temporary condition; I'll > > > > > continue trying to dig into it on my end if it happens again for this > > > > > email. > > > > > > > > > > Since there's evidence that some models want lsb and some (well, at > > > > > least one) want msb, my understanding is that we'll need a quirk one > > > > > way or the other (please correct if I'm mistaken). I unfortunately > > > > > don't have the ability to test anything other than the Pixelbook, so > > > > > if we decide the msb is the "right" way, then I will have to rely on > > > > > others to test (and find the OUI of) other models which require lsb. > > > > > > > > > > I am happy to make any changes requested, but I do not at all have > > > > > enough background here to make the decision on whether the msb > > > > > functionality deserves the quirk or if the lsb one does. How can I > > > > > help you all come to an agreement here? > > > > > > > > > > * It seems like Ville feels strongly about the msb being the correct > > > > > interpretation of the spec. > > > > > * It's unclear to me on which side of the fence Lyude falls, I > > > > > couldn't pick up a strong opinion in her clarifying question. > > > > > * Puthikorn seems to be on the side of lsb being correct, but maybe > > > > > was swayed by Ville's argument. > > Honestly I'm not hard to convince :P, if it looks like we got the bit shift > wrong for the majority of devices and everyone else agrees then I'm fine with > assuming that's the case. I'm just quite surprised, seeing as we've tested > many different panels from a few vendors and haven't run into any issues with > this before. > > Honestly - if there's this much uncertainty about it, maybe we should just ask > VESA directly what the correct interpretation of this is? Note I'm not on the > VESA board (I get access to DP/eDP specs through X.org) so unless the contacts > I've got from VESA would work (Bill Lempesis bill at vesa dot org) for that it > might be a better idea for someone from Google or Intel to ask. > > > > > > > > > > > If no one feels that Ville's argument is not strong in some way, and > > > > > we go with that, I will get to work on the requested changes. I am > > > > > concerned, though, about changing the default functionality without > > > > > testing it widely to find the set of laptops which require the lsb > > > > > quirk. I'd appreciate any advice people might have about making this > > > > > change safely. > > Usually, I just try to stick with what the majority of machines need to do. I > still think it'd be a good idea for us to verify this with VESA if there's > that much confusion though > > > > > > > > > > > Thank you for your time, > > > > > Kevin > > > > > > > > > > On Thu, Sep 17, 2020 at 2:11 PM Ville Syrjälä > > > > > <ville.syrjala@xxxxxxxxxxxxxxx> wrote: > > > > > > On Thu, Sep 17, 2020 at 09:25:35PM +0300, Ville Syrjälä wrote: > > > > > > > On Thu, Sep 17, 2020 at 11:14:43AM -0700, Puthikorn Voravootivat > > > > > > > wrote: > > > > > > > > The Lyude fde7266fb2f6 change is actually based on Chromium > > > > > > > > change > > > > > > > > (https://crrev.com/c/1650325) that fixes the brightness for > > > > > > > > Samsung > > > > > > > > Galaxy Chromebook. So currently we have 2 examples that use LSB > > > > > > > > interpretation and 1 that use MSB. > > > > > > > > > > > > > > "If field 4:0 of the EDP_PWMGEN_BIT_COUNT register represents a > > > > > > > value > > > > > > > of greater than 8 and the BACKLIGHT_BRIGHTNESS_BYTE_COUNT bit > > > > > > > is cleared to 0, only the 8 MSB of the brightness control value > > > > > > > can be > > > > > > > controlled. > > > > > > > (See Note below.) > > > > > > > Assigned bits are allocated to the MSB of the enabled register > > > > > > > combination." > > > > > > > > > > > > > > I think that's pretty clear the assigned bits are supposed to be > > > > > > > msb aligned. > > > > > > > > > > > > I guess there's some email issues happening, but just to clarify: > > > > > > > > > > > > When the spec says MSB in caps here it clearly means > > > > > > "most significant-bit(s)" since otherwise "8 MSB" would not make > > > > > > any sense in the context of a 2 byte value. > > > > > > > > > > > > Granted the spec is crap here since "Table 1-1: Acronyms and > > > > > > Initialism" does claim "MSB" should be byte(s) and "msb" bit(s). > > > > > > > > > > > > Also I can't imagine anyone would allocate the bits starting > > > > > > from the lsb when the whole thing is clearly supposed to be a > > > > > > 16bit big endian integer. So with >8 assigned bits you'd end > > > > > > up with crazy stuff like this: > > > > > > > > > > > > [ 7 ... 0 ][7 ... 0] > > > > > > [ 8 MSB ][XXXX][N LSB] > > > > > > > > > > > > so you couldn't even treat the value as a regular big endian > > > > > > thing. Instead, if you squint a bit, it now looks like a funky > > > > > > little endian value. So we're deep into some mixed endian land > > > > > > where nothing makes sense anymore. > > > > > > > > > > > > Anyways I think the code should simply do this to match the spec: > > > > > > u16 value = brightness << (16 - num_assigned_bits); > > > > > > val[0] = value >> 8; > > > > > > val[1] = value & 0xff; > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, Sep 17, 2020 at 10:55 AM Kevin Chowski < > > > > > > > > chowski@xxxxxxxxxxxx> wrote: > > > > > > > > > Apologies for being too vague. To be as precise I can be, here > > > > > > > > > is the > > > > > > > > > specific code delta I tested: https://crrev.com/c/2406616 . To > > > > > > > > > answer > > > > > > > > > your other question, the code I tested against is indeed > > > > > > > > > including the > > > > > > > > > fde7266fb2f6 (despite ostensibly being called 5.4 in my commit > > > > > > > > > message): our current top-of-tree for our 5.4 branch includes > > > > > > > > > the > > > > > > > > > intel_dp_aux_calc_max_backlight logic. Further, I'll note that > > > > > > > > > change > > > > > > > > > is exactly the change which breaks my Pixelbook model: prior > > > > > > > > > to the > > > > > > > > > change, the max_brightness was hard-coded to 0xFFFF and the > > > > > > > > > math > > > > > > > > > worked out that it didn't matter that the hardware cared about > > > > > > > > > the MSB > > > > > > > > > despite the driver code caring about the LSB. > > > > > > > > > > > > > > > > > > To answer Ville's question: the fde7266fb2f6 change which > > > > > > > > > fixes one > > > > > > > > > laptop (I believe Thinkpad X1 extreme Gen 2, from some bug > > > > > > > > > reports I > > > > > > > > > dug up) and breaks another (Pixelbook); so unfortunately I > > > > > > > > > believe we > > > > > > > > > need a quirk at least for some laptop. Reading through the > > > > > > > > > copy of the > > > > > > > > > datasheet I have, it wasn't clear to me which was the correct > > > > > > > > > interpretation. I'm cc'ing puthik@, who was leaning toward the > > > > > > > > > current > > > > > > > > > kernel code (caring about LSB) being the correct > > > > > > > > > interpretation. I > > > > > > > > > believe we have other chromebooks which do rely on LSB > > > > > > > > > functionality, > > > > > > > > > so unless we can find more examples of laptops wanting MSB it > > > > > > > > > currently looks like Pixelbook is the outlier. > > > > > > > > > > > > > > > > > > On Thu, Sep 17, 2020 at 11:28 AM Jani Nikula > > > > > > > > > <jani.nikula@xxxxxxxxxxxxxxx> wrote: > > > > > > > > > > On Thu, 17 Sep 2020, Kevin Chowski <chowski@xxxxxxxxxxxx> > > > > > > > > > > wrote: > > > > > > > > > > > We have observed that Google Pixelbook's backlight > > > > > > > > > > > hardware is > > > > > > > > > > > interpretting these backlight bits from the most- > > > > > > > > > > > significant side of the > > > > > > > > > > > 16 bit word (if DP_EDP_PWMGEN_BIT_COUNT < 16), whereas the > > > > > > > > > > > driver code > > > > > > > > > > > assumes the peripheral cares about the least-significant > > > > > > > > > > > bits. > > > > > > > > > > > > > > > > > > > > > > Testing was done from within Chrome OS's build environment > > > > > > > > > > > when the > > > > > > > > > > > patch is backported to 5.4 (the version we are newly > > > > > > > > > > > targeting for the > > > > > > > > > > > Pixelbook); for the record: > > > > > > > > > > > $ emerge-eve-kernelnext sys-kernel/chromeos-kernel-5_4 > > > > > > > > > > > && \ > > > > > > > > > > > ./update_kernel.sh --remote=$IP > > > > > > > > > > > > > > > > > > > > > > I used `/sys/kernel/debug/dri/0/eDP-1/i915_dpcd` on my > > > > > > > > > > > laptop to verify > > > > > > > > > > > that the registers were being set according to what the > > > > > > > > > > > actual hardware > > > > > > > > > > > expects; I also observe that the backlight is noticeably > > > > > > > > > > > brighter with > > > > > > > > > > > this patch. > > > > > > > > > > > > > > > > > > > > It's unclear to me what kernel version this is against, and > > > > > > > > > > what you've > > > > > > > > > > actually tested. > > > > > > > > > > > > > > > > > > > > Have you tried v5.7 kernel with Lyude's fde7266fb2f6 > > > > > > > > > > ("drm/i915: Fix eDP > > > > > > > > > > DPCD aux max backlight calculations")? > > > > > > > > > > > > > > > > > > > > I just want to make sure you've tested with all the relevant > > > > > > > > > > fixes > > > > > > > > > > before adding quirks. > > > > > > > > > > > > > > > > > > > > BR, > > > > > > > > > > Jani. > > > > > > > > > > > > > > > > > > > > > Signed-off-by: Kevin Chowski <chowski@xxxxxxxxxxxx> > > > > > > > > > > > --- > > > > > > > > > > > > > > > > > > > > > > .../drm/i915/display/intel_dp_aux_backlight.c | 34 > > > > > > > > > > > +++++++++++++++++++ > > > > > > > > > > > drivers/gpu/drm/i915/display/intel_quirks.c | 13 > > > > > > > > > > > +++++++ > > > > > > > > > > > drivers/gpu/drm/i915/i915_drv.h | 1 + > > > > > > > > > > > 3 files changed, 48 insertions(+) > > > > > > > > > > > > > > > > > > > > > > diff --git > > > > > > > > > > > a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c > > > > > > > > > > > b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c > > > > > > > > > > > index acbd7eb66cbe3..99c98f217356d 100644 > > > > > > > > > > > --- > > > > > > > > > > > a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c > > > > > > > > > > > +++ > > > > > > > > > > > b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c > > > > > > > > > > > @@ -91,6 +91,23 @@ static u32 > > > > > > > > > > > intel_dp_aux_get_backlight(struct intel_connector > > > > > > > > > > > *connector) > > > > > > > > > > > if (intel_dp->edp_dpcd[2] & > > > > > > > > > > > DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) > > > > > > > > > > > level = (read_val[0] << 8 | read_val[1]); > > > > > > > > > > > > > > > > > > > > > > + if (i915->quirks & > > > > > > > > > > > QUIRK_SHIFT_EDP_BACKLIGHT_BRIGHTNESS) { > > > > > > > > > > > + if (!drm_dp_dpcd_readb(&intel_dp->aux, > > > > > > > > > > > DP_EDP_PWMGEN_BIT_COUNT, > > > > > > > > > > > + &read_val[0] > > > > > > > > > > > )) { > > > > > > > > > > > + DRM_DEBUG_KMS("Failed to read DPCD > > > > > > > > > > > register 0x%x\n", > > > > > > > > > > > + DP_EDP_PWMGEN_BIT_CO > > > > > > > > > > > UNT); > > > > > > > > > > > + return 0; > > > > > > > > > > > + } > > > > > > > > > > > + // Only bits 4:0 are used, 7:5 are reserved. > > > > > > > > > > > + read_val[0] = read_val[0] & 0x1F; > > > > > > > > > > > + if (read_val[0] > 16) { > > > > > > > > > > > + DRM_DEBUG_KMS("Invalid > > > > > > > > > > > DP_EDP_PWNGEN_BIT_COUNT 0x%X, expected at most 16\n", > > > > > > > > > > > + read_val[0]) > > > > > > > > > > > ; > > > > > > > > > > > + return 0; > > > > > > > > > > > + } > > > > > > > > > > > + level >>= 16 - read_val[0]; > > > > > > > > > > > + } > > > > > > > > > > > + > > > > > > > > > > > return level; > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > @@ -106,6 +123,23 @@ intel_dp_aux_set_backlight(const > > > > > > > > > > > struct drm_connector_state *conn_state, u32 lev > > > > > > > > > > > struct drm_i915_private *i915 = > > > > > > > > > > > dp_to_i915(intel_dp); > > > > > > > > > > > u8 vals[2] = { 0x0 }; > > > > > > > > > > > > > > > > > > > > > > + if (i915->quirks & > > > > > > > > > > > QUIRK_SHIFT_EDP_BACKLIGHT_BRIGHTNESS) { > > > > > > > > > > > + if (!drm_dp_dpcd_readb(&intel_dp->aux, > > > > > > > > > > > DP_EDP_PWMGEN_BIT_COUNT, > > > > > > > > > > > + &vals[0])) { > > > > > > > > > > > + DRM_DEBUG_KMS("Failed to write aux > > > > > > > > > > > backlight level: Failed to read DPCD register 0x%x\n", > > > > > > > > > > > + DP_EDP_PWMGEN_BIT_ > > > > > > > > > > > COUNT); > > > > > > > > > > > + return; > > > > > > > > > > > + } > > > > > > > > > > > + // Only bits 4:0 are used, 7:5 are reserved. > > > > > > > > > > > + vals[0] = vals[0] & 0x1F; > > > > > > > > > > > + if (vals[0] > 16) { > > > > > > > > > > > + DRM_DEBUG_KMS("Failed to write aux > > > > > > > > > > > backlight level: Invalid DP_EDP_PWNGEN_BIT_COUNT 0x%X, > > > > > > > > > > > expected at most 16\n", > > > > > > > > > > > + vals[0]); > > > > > > > > > > > + return; > > > > > > > > > > > + } > > > > > > > > > > > + level <<= (16 - vals[0]) & 0xFFFF; > > > > > > > > > > > + } > > > > > > > > > > > + > > > > > > > > > > > vals[0] = level; > > > > > > > > > > > > > > > > > > > > > > /* Write the MSB and/or LSB */ > > > > > > > > > > > diff --git a/drivers/gpu/drm/i915/display/intel_quirks.c > > > > > > > > > > > b/drivers/gpu/drm/i915/display/intel_quirks.c > > > > > > > > > > > index 46beb155d835f..63b27d49b2864 100644 > > > > > > > > > > > --- a/drivers/gpu/drm/i915/display/intel_quirks.c > > > > > > > > > > > +++ b/drivers/gpu/drm/i915/display/intel_quirks.c > > > > > > > > > > > @@ -53,6 +53,16 @@ static void > > > > > > > > > > > quirk_increase_ddi_disabled_time(struct drm_i915_private > > > > > > > > > > > *i915) > > > > > > > > > > > drm_info(&i915->drm, "Applying Increase DDI Disabled > > > > > > > > > > > quirk\n"); > > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > +/* > > > > > > > > > > > + * Some eDP backlight hardware uses the most-significant > > > > > > > > > > > bits of the brightness > > > > > > > > > > > + * register, so brightness values must be shifted first. > > > > > > > > > > > + */ > > > > > > > > > > > +static void quirk_shift_edp_backlight_brightness(struct > > > > > > > > > > > drm_i915_private *i915) > > > > > > > > > > > +{ > > > > > > > > > > > + i915->quirks |= > > > > > > > > > > > QUIRK_SHIFT_EDP_BACKLIGHT_BRIGHTNESS; > > > > > > > > > > > + DRM_INFO("Applying shift eDP backlight brightness > > > > > > > > > > > quirk\n"); > > > > > > > > > > > +} > > > > > > > > > > > + > > > > > > > > > > > struct intel_quirk { > > > > > > > > > > > int device; > > > > > > > > > > > int subsystem_vendor; > > > > > > > > > > > @@ -156,6 +166,9 @@ static struct intel_quirk > > > > > > > > > > > intel_quirks[] = { > > > > > > > > > > > /* ASRock ITX*/ > > > > > > > > > > > { 0x3185, 0x1849, 0x2212, > > > > > > > > > > > quirk_increase_ddi_disabled_time }, > > > > > > > > > > > { 0x3184, 0x1849, 0x2212, > > > > > > > > > > > quirk_increase_ddi_disabled_time }, > > > > > > > > > > > + > > > > > > > > > > > + /* Google Pixelbook */ > > > > > > > > > > > + { 0x591E, 0x8086, 0x2212, > > > > > > > > > > > quirk_shift_edp_backlight_brightness }, > > > > > > > > > > > }; > > > > > > > > > > > > > > > > > > > > > > void intel_init_quirks(struct drm_i915_private *i915) > > > > > > > > > > > diff --git a/drivers/gpu/drm/i915/i915_drv.h > > > > > > > > > > > b/drivers/gpu/drm/i915/i915_drv.h > > > > > > > > > > > index e4f7f6518945b..cc93bede4fab8 100644 > > > > > > > > > > > --- a/drivers/gpu/drm/i915/i915_drv.h > > > > > > > > > > > +++ b/drivers/gpu/drm/i915/i915_drv.h > > > > > > > > > > > @@ -525,6 +525,7 @@ struct i915_psr { > > > > > > > > > > > #define QUIRK_PIN_SWIZZLED_PAGES (1<<5) > > > > > > > > > > > #define QUIRK_INCREASE_T12_DELAY (1<<6) > > > > > > > > > > > #define QUIRK_INCREASE_DDI_DISABLED_TIME (1<<7) > > > > > > > > > > > +#define QUIRK_SHIFT_EDP_BACKLIGHT_BRIGHTNESS (1<<8) > > > > > > > > > > > > > > > > > > > > > > struct intel_fbdev; > > > > > > > > > > > struct intel_fbc_work; > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > Jani Nikula, Intel Open Source Graphics Center > > > > > > > > > > > > > > -- > > > > > > > Ville Syrjälä > > > > > > > Intel > > > > > > > _______________________________________________ > > > > > > > Intel-gfx mailing list > > > > > > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > > > > > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx > > > > > > > > > > > > -- > > > > > > Ville Syrjälä > > > > > > Intel > -- > Cheers, > Lyude Paul (she/her) > Software Engineer at Red Hat > _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
