On Tue, Sep 22, 2020 at 08:47:56PM +0300, Ville Syrjälä wrote:
> On Tue, Sep 22, 2020 at 08:41:28PM +0300, Imre Deak wrote:
> > On Tue, Sep 22, 2020 at 07:54:20PM +0300, Ville Syrjälä wrote:
> > > On Tue, Sep 22, 2020 at 03:51:03PM +0300, Imre Deak wrote:
> > > > To prepare for a follow-up LTTPR change factor out a helper to disable
> > > > the training pattern in DPCD. We'll need to do this for each LTTPR
> > > > (without programming the port to output the idle pattern) when training
> > > > in LTTPR non-transparent mode.
> > > >
> > > > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > > > ---
> > > > .../drm/i915/display/intel_dp_link_training.c | 28 +++++++++++--------
> > > > 1 file changed, 16 insertions(+), 12 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> > > > index 0c3809891bd2..6994a32244dc 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> > > > @@ -102,30 +102,34 @@ void intel_dp_get_adjust_train(struct intel_dp *intel_dp,
> > > > intel_dp->train_set[lane] = v | p;
> > > > }
> > > >
> > > > +static bool intel_dp_disable_dpcd_training_pattern(struct intel_dp *intel_dp)
> > > > +{
> > > > + u8 val = DP_TRAINING_PATTERN_DISABLE;
> > > > +
> > > > + return drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_PATTERN_SET, &val, 1) == 1;
> > > > +}
> > >
> > >
> > > > +
> > > > static bool
> > > > intel_dp_set_link_train(struct intel_dp *intel_dp,
> > > > u8 dp_train_pat)
> > > > {
> > > > u8 buf[sizeof(intel_dp->train_set) + 1];
> > > > - int ret, len;
> > > > + int len;
> > > >
> > > > intel_dp_program_link_training_pattern(intel_dp, dp_train_pat);
> > > >
> > > > - buf[0] = dp_train_pat;
> > > > if ((dp_train_pat & ~DP_LINK_SCRAMBLING_DISABLE) ==
> > > > - DP_TRAINING_PATTERN_DISABLE) {
> > > > + DP_TRAINING_PATTERN_DISABLE)
> > > > /* don't write DP_TRAINING_LANEx_SET on disable */
> > >
> > > As mentioned in the other patch I think we're doing things in the wrong
> > > order here. I suspect it'll be cleaner to just stop doing
> > > intel_dp_set_link_train(DISABLE) entirely and just have a dedicated
> > > function for disabling link training. We can then trivially do a
> > > followup to swap the order of operations to match the spec.
> >
> > intel_dp_disable_dpcd_training_pattern() would be needed after each
> > LTTPR link training phase, where the port should not output idle
> > patterns, that's the only reason for this change.
> >
> > Do you mean to remove intel_dp_stop_link_train() then and do the idle
> > pattern programming + corresponding DPCD training pattern disable
> > programming at the end of the link training sequence (and remove the
> > DP_TRAINING_PATTERN_DISABLE case handling from above)? I agree with
> > that, but I see that too as a follow-up material (along with changing
> > the order as you suggested).
>
> Yeah, followup shuld be fine. I was just thinking of doing
> s/intel_dp_set_link_train(DP_TRAINING_PATTERN_DISABLE)/intel_dp_set_normal_link_train()/
> or
> s/intel_dp_set_link_train(DP_TRAINING_PATTERN_DISABLE)/intel_dp_disable_link_train()/
> or something along those lines.
Ok, that's simple enough, will do that instead in this patch.
>
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
