> -----Original Message-----
> From: Jani Nikula <jani.nikula@xxxxxxxxx>
> Sent: Tuesday, September 15, 2020 5:36 PM
> To: Kulkarni, Vandita <vandita.kulkarni@xxxxxxxxx>; intel-
> gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: ville.syrjala@xxxxxxxxxxxxxxx; B S, Karthik <karthik.b.s@xxxxxxxxx>;
> Kulkarni, Vandita <vandita.kulkarni@xxxxxxxxx>
> Subject: Re: [V9 4/4] drm/i915/dsi: Initiate fame request in cmd mode
>
> On Wed, 09 Sep 2020, Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx> wrote:
> > In TE Gate mode or TE NO_GATE mode on every flip we need to set the
> > frame update request bit.
> > After this bit is set transcoder hardware will automatically send the
> > frame data to the panel in case of TE NO_GATE mode, where it sends
> > after it receives the TE event in case of TE_GATE mode.
> > Once the frame data is sent to the panel, we see the frame counter
> > updating.
> >
> > v2: Use intel_de_read/write
> >
> > v3: remove the usage of private_flags
> >
> > Signed-off-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/display/icl_dsi.c | 26 ++++++++++++++++++++
> > drivers/gpu/drm/i915/display/intel_display.c | 13 ++++++++++
> > drivers/gpu/drm/i915/display/intel_dsi.h | 3 +++
> > 3 files changed, 42 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c
> > b/drivers/gpu/drm/i915/display/icl_dsi.c
> > index ee3c5c085cd3..cdc9d8874945 100644
> > --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> > +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> > @@ -205,6 +205,32 @@ static int dsi_send_pkt_payld(struct intel_dsi_host
> *host,
> > return 0;
> > }
> >
> > +void gen11_dsi_frame_update(struct intel_crtc_state *crtc_state) {
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > + u32 tmp, flags;
> > + enum port port;
> > +
> > + flags = crtc->mode_flags;
> > +
> > + /*
> > + * case 1 also covers dual link
> > + * In case of dual link, frame update should be set on
> > + * DSI_0
> > + */
> > + if (flags & I915_MODE_FLAG_DSI_USE_TE0)
> > + port = PORT_A;
> > + else if (flags & I915_MODE_FLAG_DSI_USE_TE1)
> > + port = PORT_B;
> > + else
> > + return;
> > +
> > + tmp = intel_de_read(dev_priv, DSI_CMD_FRMCTL(port));
> > + tmp |= DSI_FRAME_UPDATE_REQUEST;
> > + intel_de_write(dev_priv, DSI_CMD_FRMCTL(port), tmp); }
> > +
> > static void dsi_program_swing_and_deemphasis(struct intel_encoder
> > *encoder) {
> > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> diff
> > --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index ec148a8da2c2..cd852c24d3bc 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -15615,6 +15615,18 @@ static void intel_atomic_commit_tail(struct
> intel_atomic_state *state)
> > intel_set_cdclk_post_plane_update(state);
> > }
> >
> > + /*
> > + * Incase of mipi dsi command mode, we need to set frame update
> > + * for every commit
> > + */
> > + for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> > + if ((INTEL_GEN(dev_priv) >= 11) &&
> > + (intel_crtc_has_type(new_crtc_state,
> INTEL_OUTPUT_DSI))) {
>
> Excessive parens.
>
> > + if (new_crtc_state->hw.active)
> > + gen11_dsi_frame_update(new_crtc_state);
> > + }
> > + }
> > +
> > /* FIXME: We should call drm_atomic_helper_commit_hw_done()
> here
> > * already, but still need the state for the delayed optimization. To
> > * fix this:
> > @@ -15626,6 +15638,7 @@ static void intel_atomic_commit_tail(struct
> intel_atomic_state *state)
> > */
> > drm_atomic_helper_wait_for_flip_done(dev, &state->base);
> >
> > +
>
> Superfluous blank line.
>
> > for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> > if (new_crtc_state->hw.active &&
> > !needs_modeset(new_crtc_state) && diff --git
> > a/drivers/gpu/drm/i915/display/intel_dsi.h
> > b/drivers/gpu/drm/i915/display/intel_dsi.h
> > index 19f78a4022d3..08f1f586eefb 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dsi.h
> > +++ b/drivers/gpu/drm/i915/display/intel_dsi.h
> > @@ -205,6 +205,9 @@ u32 bxt_dsi_get_pclk(struct intel_encoder
> *encoder,
> > struct intel_crtc_state *config); void
> > bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port);
> >
> > +/* icl_dsi.c */
> > +void gen11_dsi_frame_update(struct intel_crtc_state *crtc_state);
>
> There's an icl_dsi.c section above. Maybe prefix the function icl_dsi while at
> it; only the static functions in icl_dsi.c are gen11 prefixed for historical
> reasons.
>
Ok, will fix it. Thanks for the review.
-Vandita
> > +
> > /* intel_dsi_vbt.c */
> > bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id);
> > void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool
> > panel_is_on);
>
> --
> Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
