On Mon, 2020-07-20 at 17:07 -0700, Manasi Navare wrote: > On Mon, Jul 20, 2020 at 04:41:25PM -0700, Khaled Almahallawy wrote: > > Add the missing CP2520 pattern 2 and 3 phy compliance patterns > > > > Signed-off-by: Khaled Almahallawy <khaled.almahallawy@xxxxxxxxx> > > --- > > drivers/gpu/drm/drm_dp_helper.c | 2 +- > > include/drm/drm_dp_helper.h | 4 +++- > > 2 files changed, 4 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/gpu/drm/drm_dp_helper.c > > b/drivers/gpu/drm/drm_dp_helper.c > > index a3c82e726057..d0fb78c6aca6 100644 > > --- a/drivers/gpu/drm/drm_dp_helper.c > > +++ b/drivers/gpu/drm/drm_dp_helper.c > > @@ -1583,7 +1583,7 @@ int drm_dp_get_phy_test_pattern(struct > > drm_dp_aux *aux, > > return err; > > > > break; > > - case DP_PHY_TEST_PATTERN_CP2520: > > + case DP_PHY_TEST_PATTERN_CP2520_PAT1: > > err = drm_dp_dpcd_read(aux, > > DP_TEST_HBR2_SCRAMBLER_RESET, > > &data->hbr2_reset, > > sizeof(data->hbr2_reset)); > > Where do we read PAT2 and PAT3, I see you defined those newly and > patch 2/2 has them > in teh switch case but the drm_dp_get_phy_test_pattern function > doesnt read them? > Per my understanding from the specs, only HBR2 (CP2520 PAT1) requires reading dpcd address 0024Ah to set HBR2_COMPLIANCT_SCRAMBLER_RESET. TPS4 (CP2520 PAT3) doesn’t require that. I’m not sure about CP2520 PAT2 if it has use or not. In the test scope we can select 6 patterns. PAT2 is not one of them. Thanks ~Khaled > Manasi > > > diff --git a/include/drm/drm_dp_helper.h > > b/include/drm/drm_dp_helper.h > > index e47dc22ebf50..65dd6cd71f1e 100644 > > --- a/include/drm/drm_dp_helper.h > > +++ b/include/drm/drm_dp_helper.h > > @@ -708,7 +708,9 @@ > > # define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2 > > # define DP_PHY_TEST_PATTERN_PRBS7 0x3 > > # define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4 > > -# define DP_PHY_TEST_PATTERN_CP2520 0x5 > > +# define DP_PHY_TEST_PATTERN_CP2520_PAT1 0x5 > > +# define DP_PHY_TEST_PATTERN_CP2520_PAT2 0x6 > > +# define DP_PHY_TEST_PATTERN_CP2520_PAT3 0x7 > > > > #define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A > > #define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250 > > -- > > 2.17.1 > > _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
