On Mon, Jul 20, 2020 at 04:41:26PM -0700, Khaled Almahallawy wrote:
> Adding support for TPS4 (CP2520 Pattern 3) PHY pattern source tests.
>
> Signed-off-by: Khaled Almahallawy <khaled.almahallawy@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 14 ++++++++++++--
> drivers/gpu/drm/i915/i915_reg.h | 4 ++++
> 2 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index d6295eb20b63..effadc096740 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5371,7 +5371,7 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
> &intel_dp->compliance.test_data.phytest;
> struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
> enum pipe pipe = crtc->pipe;
> - u32 pattern_val;
> + u32 pattern_val, dp_tp_ctl;
>
> switch (data->phy_pattern) {
> case DP_PHY_TEST_PATTERN_NONE:
> @@ -5411,7 +5411,7 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
> DDI_DP_COMP_CTL_ENABLE |
> DDI_DP_COMP_CTL_CUSTOM80);
> break;
> - case DP_PHY_TEST_PATTERN_CP2520:
> + case DP_PHY_TEST_PATTERN_CP2520_PAT1:
> /*
> * FIXME: Ideally pattern should come from DPCD 0x24A. As
> * current firmware of DPR-100 could not set it, so hardcoding
> @@ -5423,6 +5423,16 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
> DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 |
> pattern_val);
> break;
> + case DP_PHY_TEST_PATTERN_CP2520_PAT3:
> + DRM_DEBUG_KMS("Set TPS4 Phy Test Pattern\n");
> + intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0);
> + dp_tp_ctl = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
> + dp_tp_ctl &= ~DP_TP_CTL_TRAIN_PAT4_SEL_MASK;
> + dp_tp_ctl |= DP_TP_CTL_TRAIN_PAT4_SEL_TS4a;
> + dp_tp_ctl &= ~DP_TP_CTL_LINK_TRAIN_MASK;
> + dp_tp_ctl |= DP_TP_CTL_LINK_TRAIN_PAT4;
> + intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl);
> + break;
> default:
> WARN(1, "Invalid Phy Test Pattern\n");
> }
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index a0d31f3bf634..a4607bd1ac26 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -9982,6 +9982,10 @@ enum skl_power_gate {
> #define DP_TP_CTL_MODE_SST (0 << 27)
> #define DP_TP_CTL_MODE_MST (1 << 27)
> #define DP_TP_CTL_FORCE_ACT (1 << 25)
> +#define DP_TP_CTL_TRAIN_PAT4_SEL_MASK (3 << 19)
> +#define DP_TP_CTL_TRAIN_PAT4_SEL_TS4a (0 << 19)
> +#define DP_TP_CTL_TRAIN_PAT4_SEL_TP4b (1 << 19)
> +#define DP_TP_CTL_TRAIN_PAT4_SEL_TP4c (2 << 19)
The bspec calls them Training Pattern 4a/b/c, why is it _TS4a. TP4b, TP4c?
We shd make it uniform, all TP4a/b/c perhaps?
Manasi
> #define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1 << 18)
> #define DP_TP_CTL_FDI_AUTOTRAIN (1 << 15)
> #define DP_TP_CTL_LINK_TRAIN_MASK (7 << 8)
> --
> 2.17.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
