On Sat, Jun 20, 2020 at 2:18 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>
> The DSDTs on most Cherry Trail devices have an ugly clutch where the PWM
> controller gets poked from the _PS0 method of the graphics-card device:
>
> Local0 = PSAT /* \_SB_.PCI0.GFX0.PSAT */
> If (((Local0 & 0x03) == 0x03))
> {
> PSAT &= 0xFFFFFFFC
> Local1 = PSAT /* \_SB_.PCI0.GFX0.PSAT */
> RSTA = Zero
> RSTF = Zero
> RSTA = One
> RSTF = One
> PWMB |= 0xC0000000
> PWMC = PWMB /* \_SB_.PCI0.GFX0.PWMB */
> }
>
> Where PSAT is the power-status register of the PWM controller, so if it
> is in D3 when the GFX0 device's PS0 method runs then it will turn it on
> and restore the PWM ctrl register value it saved from its PS3 handler.
> Note not only does it restore it, it ors it with 0xC0000000 turning it
> on at a time where we may not want it to get turned on at all.
>
> The pwm_get call which the i915 driver does to get a reference to the
> PWM controller, already adds a device-link making the GFX0 device a
> consumer of the PWM device. So it should already have been resumed when
> the above AML runs and the AML should thus not do its undesirable poking
> of the PWM controller register.
>
> But the PCI core powers on PCI devices in the no-irq resume phase and
> thus calls the troublesome PS0 method in the no-irq resume phase.
> Where as LPSS devices by default are resumed in the early resume phase.
>
> This commit sets the resume_from_noirq flag in the bsw_pwm_dev_desc
> struct, so that Cherry Trail PWM controllers will be resumed in the
> no-irq phase. Together with the device-link added by the pwm-get this
> ensures that the PWM controller will be on when the troublesome PS0
> method runs, which stops it from poking the PWM controller.
>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> ---
> drivers/acpi/acpi_lpss.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
> index c5a5a179f49d..446e666b3466 100644
> --- a/drivers/acpi/acpi_lpss.c
> +++ b/drivers/acpi/acpi_lpss.c
> @@ -257,6 +257,7 @@ static const struct lpss_device_desc bsw_pwm_dev_desc = {
> .flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
> .prv_offset = 0x800,
> .setup = bsw_pwm_setup,
> + .resume_from_noirq = true,
> };
>
> static const struct lpss_device_desc byt_uart_dev_desc = {
> --
> 2.26.2
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
