Re: [PATCH] drm/i915: Fix the i915_dsc_fec_support debugfs file for DP MST connectors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 09, 2020 at 08:59:23PM +0300, Ville Syrjälä wrote:
> On Tue, Jun 09, 2020 at 08:40:35PM +0300, Imre Deak wrote:
> > On Tue, Jun 09, 2020 at 06:05:25PM +0300, Ville Syrjälä wrote:
> > > On Mon, Jun 08, 2020 at 09:10:23PM +0300, Imre Deak wrote:
> > > > DSC is not supported on DP MST streams so just return -EINVAL when
> > > > reading/writing the i915_dsc_fec_support debugfs file for such
> > > > connectors.
> > > > 
> > > > This also fixes an OOPS, caused by the encoder->digport cast, which is
> > > > not valid for MST encoders.
> > > > 
> > > > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > > > ---
> > > >  .../drm/i915/display/intel_display_debugfs.c  | 36 +++++++++++++++----
> > > >  1 file changed, 29 insertions(+), 7 deletions(-)
> > > > 
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > > index 2b640d8ab9d2..ebca8e488d03 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > > @@ -2094,6 +2094,8 @@ static int i915_dsc_fec_support_show(struct seq_file *m, void *data)
> > > >  	drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
> > > >  
> > > >  	do {
> > > > +		struct intel_encoder *encoder;
> > > > +
> > > >  		try_again = false;
> > > >  		ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
> > > >  				       &ctx);
> > > > @@ -2120,8 +2122,17 @@ static int i915_dsc_fec_support_show(struct seq_file *m, void *data)
> > > >  		} else if (ret) {
> > > >  			break;
> > > >  		}
> > > > -		intel_dp = intel_attached_dp(to_intel_connector(connector));
> > > > +
> > > > +		encoder = intel_attached_encoder(to_intel_connector(connector));
> > > > +		/* TODO: Add DSC support for MST streams */
> > > > +		if (encoder->type == INTEL_OUTPUT_DP_MST) {
> > > > +			ret = -EINVAL;
> > > > +			break;
> > > > +		}
> > > > +
> > > > +		intel_dp = &enc_to_dig_port(encoder)->dp;
> > > >  		crtc_state = to_intel_crtc_state(crtc->state);
> > > > +
> > > >  		seq_printf(m, "DSC_Enabled: %s\n",
> > > >  			   yesno(crtc_state->dsc.compression_enable));
> > > >  		seq_printf(m, "DSC_Sink_Support: %s\n",
> > > > @@ -2147,9 +2158,8 @@ static ssize_t i915_dsc_fec_support_write(struct file *file,
> > > >  	int ret;
> > > >  	struct drm_connector *connector =
> > > >  		((struct seq_file *)file->private_data)->private;
> > > > -	struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector));
> > > > -	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> > > > -	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> > > > +	struct drm_i915_private *i915 = to_i915(connector->dev);
> > > > +	struct intel_encoder *encoder;
> > > >  
> > > >  	if (len == 0)
> > > >  		return 0;
> > > > @@ -2163,10 +2173,22 @@ static ssize_t i915_dsc_fec_support_write(struct file *file,
> > > >  
> > > >  	drm_dbg(&i915->drm, "Got %s for DSC Enable\n",
> > > >  		(dsc_enable) ? "true" : "false");
> > > > -	intel_dp->force_dsc_en = dsc_enable;
> > > >  
> > > > -	*offp += len;
> > > > -	return len;
> > > > +	drm_modeset_lock(&i915->drm.mode_config.connection_mutex, NULL);
> > > > +
> > > > +	encoder = intel_attached_encoder(to_intel_connector(connector));
> > > > +	/* TODO: Add DSC support for MST streams */
> > > > +	if (encoder->type == INTEL_OUTPUT_DP_MST) {
> > > 
> > > The attached encoder can be NULL for MST.
> > 
> > Yes, I also sent v2 with that fixed.
> > 
> > > Can't we just not add this debugfs file for MST connectors?
> > 
> > Won't we have per MST connector DSC at one point? In that case we'd need
> > something like this anyway.
> 
> The problem is that it doesn't work until the encoder has been attached.
> So the behaviour of the interface would be rather inconsistent when
> applied to MST connectors. No idea what current tests are doing with
> this stuff so can't say whether it would be a problem in practice.

It's used to force DSC by writing to it before commit, so yes then it
wouldn't work anyway.

> > If this is never needed then yes, better not
> > to add it. I can't use connector_type which is the same for MST and SST
> > connectors so is it ok to differentiate based on a
> > intel_attached_encoder() == NULL check?
> 
> IIRC some other places use connector.mst_port to tell the two
> apart.

Ok, will use that.

> 
> > 
> > > 
> > > > +		ret = -EINVAL;
> > > > +	} else {
> > > > +		enc_to_intel_dp(encoder)->force_dsc_en = dsc_enable;
> > > > +		*offp += len;
> > > > +		ret = len;
> > > > +	}
> > > > +
> > > > +	drm_modeset_unlock(&i915->drm.mode_config.connection_mutex);
> > > > +
> > > > +	return ret;
> > > >  }
> > > >  
> > > >  static int i915_dsc_fec_support_open(struct inode *inode,
> > > > -- 
> > > > 2.23.1
> > > > 
> > > > _______________________________________________
> > > > Intel-gfx mailing list
> > > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > > 
> > > -- 
> > > Ville Syrjälä
> > > Intel
> 
> -- 
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux