[PATCH v2] drm/i915: HDMI/DP - ELD info refresh support for Haswell

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 18, 2013 at 10:51:55AM +0800, Wang Xingchao wrote:
> ELD info should be updated dynamically according to hot plug event.
> For haswell chip, clear/set the eld valid bit and output enable bit
> from callback intel_disable/eanble_ddi().

Hmm. Is it OK to set the ELD valid bit if the ELD hasn't actually been
written?

And besides these bits are already set by haswell_write_eld().

> 
> Signed-off-by: Wang Xingchao <xingchao.wang at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c |   18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index f02b3fe..7ce4728 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1274,10 +1274,14 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
>  static void intel_enable_ddi(struct intel_encoder *intel_encoder)
>  {
>  	struct drm_encoder *encoder = &intel_encoder->base;
> +	struct drm_crtc *crtc = encoder->crtc;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	int pipe = intel_crtc->pipe;
>  	struct drm_device *dev = encoder->dev;
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	enum port port = intel_ddi_get_encoder_port(intel_encoder);
>  	int type = intel_encoder->type;
> +	int tmp;
>  
>  	if (type == INTEL_OUTPUT_HDMI) {
>  		/* In HDMI/DVI mode, the port width, and swing/emphasis values
> @@ -1290,18 +1294,32 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder)
>  
>  		ironlake_edp_backlight_on(intel_dp);
>  	}
> +
> +	tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> +	tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
> +	I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
>  }
>  
>  static void intel_disable_ddi(struct intel_encoder *intel_encoder)
>  {
>  	struct drm_encoder *encoder = &intel_encoder->base;
> +	struct drm_crtc *crtc = encoder->crtc;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	int pipe = intel_crtc->pipe;
>  	int type = intel_encoder->type;
> +	struct drm_device *dev = encoder->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	int tmp;
>  
>  	if (type == INTEL_OUTPUT_EDP) {
>  		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>  
>  		ironlake_edp_backlight_off(intel_dp);
>  	}
> +
> +	tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> +	tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
> +	I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
>  }
>  
>  int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
> -- 
> 1.7.9.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrj?l?
Intel OTC


[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux