On Mon, Apr 13, 2020 at 10:08:07PM -0700, Manasi Navare wrote:
> From: Bhanuprakash Modem <bhanuprakash.modem@xxxxxxxxx>
>
> [Why]
> It's useful to know the min and max vrr range for IGT testing.
>
> [How]
> Expose the min and max vfreq for the connector via a debugfs file
> on the connector, "i915_vrr_info".
>
> Example usage: cat /sys/kernel/debug/dri/0/DP-1/i915_vrr_info
>
> v3:
> * Remove the unnecessary debug print (Manasi)
> v2:
> * Fix the typo in max_vfreq (Manasi)
> * Change the name of node to i915_vrr_info so we can add
> other vrr info for more debug info (Manasi)
> * Change the VRR capable to display Yes or No (Manasi)
> * Fix indentation checkpatch errors (Manasi)
>
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@xxxxxxxxx>
> Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Tested-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
So if I'm understanding things correctly AMD butchered the VRR stuff and
only exposes it when:
- VRR_ENABLED is set
- _and_ you're using the legacy page_flip path, atomic flip doesn't
support it
- _and_ the PAGE_FLIP_ASYNC flag is set.
That's pretty bonkers uapi, and I think before we add a new driver we need
to figure out how to make this work. Works case we might need a revert
hammer for the amdgpu side and new VRR properties so we're not tricking
any existing userspace into something where stuff then would break.
But I'm hoping we can do a bit more clever than that. Or maybe I'm just
wrong on how amdgpu vrr works.
Adding amd folks.
-Daniel
> ---
> .../drm/i915/display/intel_display_debugfs.c | 22 ++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> index bdeea2e02642..35b229ab4d19 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> @@ -2096,6 +2096,21 @@ static const struct file_operations i915_dsc_fec_support_fops = {
> .write = i915_dsc_fec_support_write
> };
>
> +static int i915_vrr_info_show(struct seq_file *m, void *data)
> +{
> + struct drm_connector *connector = m->private;
> +
> + if (connector->status != connector_status_connected)
> + return -ENODEV;
> +
> + seq_printf(m, "Vrr_capable: %s\n", yesno(intel_dp_is_vrr_capable(connector)));
> + seq_printf(m, "Min: %u\n", (u8)connector->display_info.monitor_range.min_vfreq);
> + seq_printf(m, "Max: %u\n", (u8)connector->display_info.monitor_range.max_vfreq);
> +
> + return 0;
> +}
> +DEFINE_SHOW_ATTRIBUTE(i915_vrr_info);
> +
> /**
> * intel_connector_debugfs_add - add i915 specific connector debugfs files
> * @connector: pointer to a registered drm_connector
> @@ -2130,9 +2145,14 @@ int intel_connector_debugfs_add(struct drm_connector *connector)
>
> if (INTEL_GEN(dev_priv) >= 10 &&
> (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> - connector->connector_type == DRM_MODE_CONNECTOR_eDP))
> + connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
> debugfs_create_file("i915_dsc_fec_support", S_IRUGO, root,
> connector, &i915_dsc_fec_support_fops);
>
> + if (INTEL_GEN(dev_priv) >= 12)
> + debugfs_create_file("i915_vrr_info", S_IRUGO,
> + root, connector, &i915_vrr_info_fops);
> + }
> +
> return 0;
> }
> --
> 2.19.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
