We need a new PCode request commands and reply codes
to be added as a prepartion patch for QGV points
restricting for new SAGV support.
v2: - Extracted those changes into separate patch
(Ville Syrjälä)
v3: - Moved new PCode masks to another place from
PCode commands(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 5 +++++
drivers/gpu/drm/i915/intel_sideband.c | 2 ++
2 files changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0b39b9abf8a4..a3cdb22826d9 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9085,6 +9085,7 @@ enum {
#define GEN7_PCODE_ILLEGAL_DATA 0x3
#define GEN11_PCODE_ILLEGAL_SUBCOMMAND 0x4
#define GEN11_PCODE_LOCKED 0x6
+#define GEN11_PCODE_REJECTED 0x11
#define GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x10
#define GEN6_PCODE_WRITE_RC6VIDS 0x4
#define GEN6_PCODE_READ_RC6VIDS 0x5
@@ -9106,6 +9107,7 @@ enum {
#define ICL_PCODE_MEM_SUBSYSYSTEM_INFO 0xd
#define ICL_PCODE_MEM_SS_READ_GLOBAL_INFO (0x0 << 8)
#define ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point) (((point) << 16) | (0x1 << 8))
+#define ICL_PCODE_SAGV_DE_MEM_SS_CONFIG 0xe
#define GEN6_PCODE_READ_D_COMP 0x10
#define GEN6_PCODE_WRITE_D_COMP 0x11
#define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17
@@ -9134,6 +9136,9 @@ enum {
#define GEN8_GT_SLICE_INFO _MMIO(0x138064)
#define GEN8_LSLICESTAT_MASK 0x7
+#define GEN11_PCODE_POINTS_RESTRICTED 0x0
+#define GEN11_PCODE_POINTS_RESTRICTED_MASK 0x1
+
#define CHV_POWER_SS0_SIG1 _MMIO(0xa720)
#define CHV_POWER_SS1_SIG1 _MMIO(0xa728)
#define CHV_SS_PG_ENABLE (1 << 1)
diff --git a/drivers/gpu/drm/i915/intel_sideband.c b/drivers/gpu/drm/i915/intel_sideband.c
index 1447e7516cb7..1e7dd6b6f103 100644
--- a/drivers/gpu/drm/i915/intel_sideband.c
+++ b/drivers/gpu/drm/i915/intel_sideband.c
@@ -370,6 +370,8 @@ static inline int gen7_check_mailbox_status(u32 mbox)
return -ENXIO;
case GEN11_PCODE_LOCKED:
return -EBUSY;
+ case GEN11_PCODE_REJECTED:
+ return -EACCES;
case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
return -EOVERFLOW;
default:
--
2.24.1.485.gad05a3d8e5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
