On Fri, Apr 03, 2020 at 11:40:06PM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> gma500 only uses mode->private_flags to convey the sdvo pixel
> multiplier from the encoder .mode_fixup() hook to the encoder
> .mode_set() hook. Those always seems get called as a pair so
> let's just stuff the pixel multiplier into the encoder itself
> as there are no state objects we could use in this non-atomic
> driver.
>
> Paves the way for nuking mode->private_flag.
Yeah the sdvo multiplier is why I originally started with creating the
intel_pipe_config stuff ...
The only semi-nasty thing with legacy crtc helpers is that they don't
clean up anything from mode_fixup failures. But since the next modeset
will go through the full dance again I think that's ok.
Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
>
> Cc: Patrik Jakobsson <patrik.r.jakobsson@xxxxxxxxx>
> CC: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> Cc: Emil Velikov <emil.l.velikov@xxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/gma500/psb_intel_drv.h | 19 -------------------
> drivers/gpu/drm/gma500/psb_intel_sdvo.c | 11 ++++++-----
> 2 files changed, 6 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h
> index fb601983cef0..3dd5718c3e31 100644
> --- a/drivers/gpu/drm/gma500/psb_intel_drv.h
> +++ b/drivers/gpu/drm/gma500/psb_intel_drv.h
> @@ -56,25 +56,6 @@
> #define INTEL_OUTPUT_DISPLAYPORT 9
> #define INTEL_OUTPUT_EDP 10
>
> -#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
> -#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
> -
> -static inline void
> -psb_intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
> - int multiplier)
> -{
> - mode->clock *= multiplier;
> - mode->private_flags |= multiplier;
> -}
> -
> -static inline int
> -psb_intel_mode_get_pixel_multiplier(const struct drm_display_mode *mode)
> -{
> - return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK)
> - >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
> -}
> -
> -
> /*
> * Hold information useally put on the device driver privates here,
> * since it needs to be shared across multiple of devices drivers privates.
> diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> index 264d7ad004b4..9e88a37f55e9 100644
> --- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> @@ -132,6 +132,8 @@ struct psb_intel_sdvo {
> /* DDC bus used by this SDVO encoder */
> uint8_t ddc_bus;
>
> + u8 pixel_multiplier;
> +
> /* Input timings for adjusted_mode */
> struct psb_intel_sdvo_dtd input_dtd;
>
> @@ -958,7 +960,6 @@ static bool psb_intel_sdvo_mode_fixup(struct drm_encoder *encoder,
> struct drm_display_mode *adjusted_mode)
> {
> struct psb_intel_sdvo *psb_intel_sdvo = to_psb_intel_sdvo(encoder);
> - int multiplier;
>
> /* We need to construct preferred input timings based on our
> * output timings. To do that, we have to set the output
> @@ -985,8 +986,9 @@ static bool psb_intel_sdvo_mode_fixup(struct drm_encoder *encoder,
> /* Make the CRTC code factor in the SDVO pixel multiplier. The
> * SDVO device will factor out the multiplier during mode_set.
> */
> - multiplier = psb_intel_sdvo_get_pixel_multiplier(adjusted_mode);
> - psb_intel_mode_set_pixel_multiplier(adjusted_mode, multiplier);
> + psb_intel_sdvo->pixel_multiplier =
> + psb_intel_sdvo_get_pixel_multiplier(adjusted_mode);
> + adjusted_mode->clock *= psb_intel_sdvo->pixel_multiplier;
>
> return true;
> }
> @@ -1002,7 +1004,6 @@ static void psb_intel_sdvo_mode_set(struct drm_encoder *encoder,
> u32 sdvox;
> struct psb_intel_sdvo_in_out_map in_out;
> struct psb_intel_sdvo_dtd input_dtd;
> - int pixel_multiplier = psb_intel_mode_get_pixel_multiplier(adjusted_mode);
> int rate;
> int need_aux = IS_MRST(dev) ? 1 : 0;
>
> @@ -1060,7 +1061,7 @@ static void psb_intel_sdvo_mode_set(struct drm_encoder *encoder,
>
> (void) psb_intel_sdvo_set_input_timing(psb_intel_sdvo, &input_dtd);
>
> - switch (pixel_multiplier) {
> + switch (psb_intel_sdvo->pixel_multiplier) {
> default:
> case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
> case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
> --
> 2.24.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
