On Fri, Mar 20, 2020 at 04:36:26PM +0200, Jani Nikula wrote:
> Convert all the DRM_* logging macros to the struct drm_device based
> macros to provide device specific logging.
>
> No functional changes.
>
> Generated using the following semantic patch, originally written by
> Wambui Karuga <wambui.karugax@xxxxxxxxx>, with manual fixups on top:
>
> @@
> identifier fn, T;
> @@
>
> fn(...,struct drm_i915_private *T,...) {
> <+...
> (
> -DRM_INFO(
> +drm_info(&T->drm,
> ...)
> |
> -DRM_NOTE(
> +drm_notice(&T->drm,
> ...)
> |
> -DRM_ERROR(
> +drm_err(&T->drm,
> ...)
> |
> -DRM_WARN(
> +drm_warn(&T->drm,
> ...)
> |
> -DRM_DEBUG_DRIVER(
> +drm_dbg(&T->drm,
> ...)
> |
> -DRM_DEBUG_KMS(
> +drm_dbg_kms(&T->drm,
> ...)
> |
> -DRM_DEBUG_ATOMIC(
> +drm_dbg_atomic(&T->drm,
> ...)
> )
> ...+>
> }
>
> @@
> identifier fn, T;
> @@
>
> fn(...) {
> ...
> struct drm_i915_private *T = ...;
> <+...
> (
> -DRM_INFO(
> +drm_info(&T->drm,
> ...)
> |
> -DRM_NOTE(
> +drm_notice(&T->drm,
> ...)
> |
> -DRM_ERROR(
> +drm_err(&T->drm,
> ...)
> |
> -DRM_WARN(
> +drm_warn(&T->drm,
> ...)
> |
> -DRM_DEBUG_DRIVER(
> +drm_dbg(&T->drm,
> ...)
> |
> -DRM_DEBUG_KMS(
> +drm_dbg_kms(&T->drm,
> ...)
> |
> -DRM_DEBUG_ATOMIC(
> +drm_dbg_atomic(&T->drm,
> ...)
> )
> ...+>
> }
>
> Cc: Wambui Karuga <wambui.karugax@xxxxxxxxx>
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 118 ++++++++++++++---------
> 1 file changed, 72 insertions(+), 46 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 73d0f4648c06..3df7fb5b3d02 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -1102,7 +1102,8 @@ static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
> if (intel_de_read(dev_priv, reg) & DDI_BUF_IS_IDLE)
> return;
> }
> - DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port));
> + drm_err(&dev_priv->drm, "Timeout waiting for DDI BUF %c idle bit\n",
> + port_name(port));
> }
>
> static u32 hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll)
> @@ -1249,7 +1250,8 @@ void hsw_fdi_link_train(struct intel_encoder *encoder,
>
> temp = intel_de_read(dev_priv, DP_TP_STATUS(PORT_E));
> if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
> - DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
> + drm_dbg_kms(&dev_priv->drm,
> + "FDI link training done on step %d\n", i);
> break;
> }
>
> @@ -1258,7 +1260,7 @@ void hsw_fdi_link_train(struct intel_encoder *encoder,
> * Results in less fireworks from the state checker.
> */
> if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) {
> - DRM_ERROR("FDI link training failed!\n");
> + drm_err(&dev_priv->drm, "FDI link training failed!\n");
> break;
> }
>
> @@ -1605,7 +1607,8 @@ void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state
>
> if (dev_priv->quirks & QUIRK_INCREASE_DDI_DISABLED_TIME &&
> intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
> - DRM_DEBUG_KMS("Quirk Increase DDI disabled time\n");
> + drm_dbg_kms(&dev_priv->drm,
> + "Quirk Increase DDI disabled time\n");
> /* Quirk time at 100ms for reliable operation */
> msleep(100);
> }
> @@ -1786,20 +1789,23 @@ static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
> }
>
> if (!*pipe_mask)
> - DRM_DEBUG_KMS("No pipe for [ENCODER:%d:%s] found\n",
> - encoder->base.base.id, encoder->base.name);
> + drm_dbg_kms(&dev_priv->drm,
> + "No pipe for [ENCODER:%d:%s] found\n",
> + encoder->base.base.id, encoder->base.name);
>
> if (!mst_pipe_mask && hweight8(*pipe_mask) > 1) {
> - DRM_DEBUG_KMS("Multiple pipes for [ENCODER:%d:%s] (pipe_mask %02x)\n",
> - encoder->base.base.id, encoder->base.name,
> - *pipe_mask);
> + drm_dbg_kms(&dev_priv->drm,
> + "Multiple pipes for [ENCODER:%d:%s] (pipe_mask %02x)\n",
> + encoder->base.base.id, encoder->base.name,
> + *pipe_mask);
> *pipe_mask = BIT(ffs(*pipe_mask) - 1);
> }
>
> if (mst_pipe_mask && mst_pipe_mask != *pipe_mask)
> - DRM_DEBUG_KMS("Conflicting MST and non-MST state for [ENCODER:%d:%s] (pipe_mask %02x mst_pipe_mask %02x)\n",
> - encoder->base.base.id, encoder->base.name,
> - *pipe_mask, mst_pipe_mask);
> + drm_dbg_kms(&dev_priv->drm,
> + "Conflicting MST and non-MST state for [ENCODER:%d:%s] (pipe_mask %02x mst_pipe_mask %02x)\n",
> + encoder->base.base.id, encoder->base.name,
> + *pipe_mask, mst_pipe_mask);
> else
> *is_dp_mst = mst_pipe_mask;
>
> @@ -1809,9 +1815,9 @@ static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder,
> if ((tmp & (BXT_PHY_CMNLANE_POWERDOWN_ACK |
> BXT_PHY_LANE_POWERDOWN_ACK |
> BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED)
> - DRM_ERROR("[ENCODER:%d:%s] enabled but PHY powered down? "
> - "(PHY_CTL %08x)\n", encoder->base.base.id,
> - encoder->base.name, tmp);
> + drm_err(&dev_priv->drm,
> + "[ENCODER:%d:%s] enabled but PHY powered down? (PHY_CTL %08x)\n",
> + encoder->base.base.id, encoder->base.name, tmp);
> }
>
> intel_display_power_put(dev_priv, encoder->power_domain, wakeref);
> @@ -1973,7 +1979,7 @@ static void skl_ddi_set_iboost(struct intel_encoder *encoder,
>
> /* Make sure that the requested I_boost is valid */
> if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) {
> - DRM_ERROR("Invalid I_boost value %u\n", iboost);
> + drm_err(&dev_priv->drm, "Invalid I_boost value %u\n", iboost);
> return;
> }
>
> @@ -2232,7 +2238,9 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
> return;
>
> if (level >= n_entries) {
> - DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.", level, n_entries - 1);
> + drm_dbg_kms(&dev_priv->drm,
> + "DDI translation not found for level %d. Using %d instead.",
> + level, n_entries - 1);
> level = n_entries - 1;
> }
>
> @@ -2358,8 +2366,9 @@ static void icl_mg_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
> ddi_translations = icl_mg_phy_ddi_translations;
> /* The table does not have values for level 3 and level 9. */
> if (level >= n_entries || level == 3 || level == 9) {
> - DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.",
> - level, n_entries - 2);
> + drm_dbg_kms(&dev_priv->drm,
> + "DDI translation not found for level %d. Using %d instead.",
> + level, n_entries - 2);
> level = n_entries - 2;
> }
>
> @@ -2693,8 +2702,9 @@ static void icl_sanitize_port_clk_off(struct drm_i915_private *dev_priv,
> if (drm_WARN_ON(&dev_priv->drm, ddi_clk_needed))
> continue;
>
> - DRM_NOTE("PHY %c is disabled/in DSI mode with an ungated DDI clock, gate it\n",
> - phy_name(phy));
> + drm_notice(&dev_priv->drm,
> + "PHY %c is disabled/in DSI mode with an ungated DDI clock, gate it\n",
> + phy_name(phy));
> val |= icl_dpclka_cfgcr0_clk_off(dev_priv, phy);
> intel_de_write(dev_priv, ICL_DPCLKA_CFGCR0, val);
> }
> @@ -2931,11 +2941,14 @@ icl_program_mg_dp_mode(struct intel_digital_port *intel_dig_port,
> static void intel_dp_sink_set_fec_ready(struct intel_dp *intel_dp,
> const struct intel_crtc_state *crtc_state)
> {
> + struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> +
> if (!crtc_state->fec_enable)
> return;
>
> if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_FEC_CONFIGURATION, DP_FEC_READY) <= 0)
> - DRM_DEBUG_KMS("Failed to set FEC_READY in the sink\n");
> + drm_dbg_kms(&i915->drm,
> + "Failed to set FEC_READY in the sink\n");
> }
>
> static void intel_ddi_enable_fec(struct intel_encoder *encoder,
> @@ -2955,7 +2968,8 @@ static void intel_ddi_enable_fec(struct intel_encoder *encoder,
>
> if (intel_de_wait_for_set(dev_priv, intel_dp->regs.dp_tp_status,
> DP_TP_STATUS_FEC_ENABLE_LIVE, 1))
> - DRM_ERROR("Timed out waiting for FEC Enable Status\n");
> + drm_err(&dev_priv->drm,
> + "Timed out waiting for FEC Enable Status\n");
> }
>
> static void intel_ddi_disable_fec_state(struct intel_encoder *encoder,
> @@ -3413,8 +3427,9 @@ static void icl_disable_transcoder_port_sync(const struct intel_crtc_state *old_
> if (old_crtc_state->master_transcoder == INVALID_TRANSCODER)
> return;
>
> - DRM_DEBUG_KMS("Disabling Transcoder Port Sync on Slave Transcoder %s\n",
> - transcoder_name(old_crtc_state->cpu_transcoder));
> + drm_dbg_kms(&dev_priv->drm,
> + "Disabling Transcoder Port Sync on Slave Transcoder %s\n",
> + transcoder_name(old_crtc_state->cpu_transcoder));
>
> intel_de_write(dev_priv,
> TRANS_DDI_FUNC_CTL2(old_crtc_state->cpu_transcoder), 0);
> @@ -3565,9 +3580,9 @@ static void intel_enable_ddi_hdmi(struct intel_encoder *encoder,
> if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
> crtc_state->hdmi_high_tmds_clock_ratio,
> crtc_state->hdmi_scrambling))
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Failed to configure sink "
> - "scrambling/TMDS bit clock ratio\n",
> - connector->base.id, connector->name);
> + drm_dbg_kms(&dev_priv->drm,
> + "[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n",
> + connector->base.id, connector->name);
>
> /* Display WA #1143: skl,kbl,cfl */
> if (IS_GEN9_BC(dev_priv)) {
> @@ -3662,6 +3677,7 @@ static void intel_disable_ddi_hdmi(struct intel_encoder *encoder,
> const struct intel_crtc_state *old_crtc_state,
> const struct drm_connector_state *old_conn_state)
> {
> + struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> struct drm_connector *connector = old_conn_state->connector;
>
> if (old_crtc_state->has_audio)
> @@ -3670,8 +3686,9 @@ static void intel_disable_ddi_hdmi(struct intel_encoder *encoder,
>
> if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
> false, false))
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Failed to reset sink scrambling/TMDS bit clock ratio\n",
> - connector->base.id, connector->name);
> + drm_dbg_kms(&i915->drm,
> + "[CONNECTOR:%d:%s] Failed to reset sink scrambling/TMDS bit clock ratio\n",
> + connector->base.id, connector->name);
> }
>
> static void intel_disable_ddi(struct intel_encoder *encoder,
> @@ -3922,9 +3939,10 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
> pipe_config->fec_enable =
> intel_de_read(dev_priv, dp_tp_ctl) & DP_TP_CTL_FEC_ENABLE;
>
> - DRM_DEBUG_KMS("[ENCODER:%d:%s] Fec status: %u\n",
> - encoder->base.base.id, encoder->base.name,
> - pipe_config->fec_enable);
> + drm_dbg_kms(&dev_priv->drm,
> + "[ENCODER:%d:%s] Fec status: %u\n",
> + encoder->base.base.id, encoder->base.name,
> + pipe_config->fec_enable);
> }
>
> break;
> @@ -3961,8 +3979,9 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
> * up by the BIOS, and thus we can't get the mode at module
> * load.
> */
> - DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
> - pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
> + drm_dbg_kms(&dev_priv->drm,
> + "pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
> + pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
> dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp;
> }
>
> @@ -4121,12 +4140,13 @@ static int intel_ddi_compute_config_late(struct intel_encoder *encoder,
> struct intel_crtc_state *crtc_state,
> struct drm_connector_state *conn_state)
> {
> + struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> struct drm_connector *connector = conn_state->connector;
> u8 port_sync_transcoders = 0;
>
> - DRM_DEBUG_KMS("[ENCODER:%d:%s] [CRTC:%d:%s]",
> - encoder->base.base.id, encoder->base.name,
> - crtc_state->uapi.crtc->base.id, crtc_state->uapi.crtc->name);
> + drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] [CRTC:%d:%s]",
> + encoder->base.base.id, encoder->base.name,
> + crtc_state->uapi.crtc->base.id, crtc_state->uapi.crtc->name);
>
> if (connector->has_tile)
> port_sync_transcoders = intel_ddi_port_sync_transcoders(crtc_state,
> @@ -4265,7 +4285,8 @@ static int intel_hdmi_reset_link(struct intel_encoder *encoder,
>
> ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
> if (ret < 0) {
> - DRM_ERROR("Failed to read TMDS config: %d\n", ret);
> + drm_err(&dev_priv->drm, "Failed to read TMDS config: %d\n",
> + ret);
> return 0;
> }
>
> @@ -4411,7 +4432,8 @@ intel_ddi_max_lanes(struct intel_digital_port *intel_dport)
> * so we use the proper lane count for our calculations.
> */
> if (intel_ddi_a_force_4_lanes(intel_dport)) {
> - DRM_DEBUG_KMS("Forcing DDI_A_4_LANES for port A\n");
> + drm_dbg_kms(&dev_priv->drm,
> + "Forcing DDI_A_4_LANES for port A\n");
> intel_dport->saved_port_bits |= DDI_A_4_LANES;
> max_lanes = 4;
> }
> @@ -4439,12 +4461,14 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
> init_dp = true;
> init_lspcon = true;
> init_hdmi = false;
> - DRM_DEBUG_KMS("VBT says port %c has lspcon\n", port_name(port));
> + drm_dbg_kms(&dev_priv->drm, "VBT says port %c has lspcon\n",
> + port_name(port));
> }
>
> if (!init_dp && !init_hdmi) {
> - DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible, respect it\n",
> - port_name(port));
> + drm_dbg_kms(&dev_priv->drm,
> + "VBT says port %c is not DVI/HDMI/DP compatible, respect it\n",
> + port_name(port));
> return;
> }
>
> @@ -4523,14 +4547,16 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
> if (init_lspcon) {
> if (lspcon_init(intel_dig_port))
> /* TODO: handle hdmi info frame part */
> - DRM_DEBUG_KMS("LSPCON init success on port %c\n",
> - port_name(port));
> + drm_dbg_kms(&dev_priv->drm,
> + "LSPCON init success on port %c\n",
> + port_name(port));
> else
> /*
> * LSPCON init faied, but DP init was success, so
> * lets try to drive as DP++ port.
> */
> - DRM_ERROR("LSPCON init failed on port %c\n",
> + drm_err(&dev_priv->drm,
> + "LSPCON init failed on port %c\n",
> port_name(port));
> }
Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
>
> --
> 2.20.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
