Re: [RFC 1/7] drm/i915: Define flip done functions and enable IER

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em sex, 2020-03-06 às 17:09 +0530, Karthik B S escreveu:
> Add enable/disable flip done functions and enable
> the flip done interrupt in IER.
> 
> Flip done interrupt is used to send the page flip event as soon as the
> surface address is written as per the requirement of async flips.
> 
> Signed-off-by: Karthik B S <karthik.b.s@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_irq.c | 37 ++++++++++++++++++++++++++++++++-
>  drivers/gpu/drm/i915/i915_irq.h |  2 ++
>  2 files changed, 38 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index ecf07b0faad2..5955e737a45d 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -2626,6 +2626,27 @@ int bdw_enable_vblank(struct drm_crtc *crtc)
>  	return 0;
>  }
>  
> +void icl_enable_flip_done(struct drm_crtc *crtc)


Platform prefixes indicate the first platform that is able to run this
function. In this case I can't even see which platforms will run the
function because it's only later in the series that this function will
get called. I'm not a fan of this patch splitting style where a
function gets added in patch X and then used in patch X+Y. IMHO
functions should only be introduced in patches where they are used.
This makes the code much easier to review.

So, shouldn't this be skl_enable_flip_done()?

> +{
> +	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
> +	enum pipe pipe = to_intel_crtc(crtc)->pipe;
> +	struct drm_vblank_crtc *vblank = &dev_priv->drm.vblank[pipe];
> +	unsigned long irqflags;
> +
> +	/* Make sure that vblank is not enabled, as we are already sending
> +	 * the page flip event in the flip_done_handler.
> +	 */
> +	if (atomic_read(&vblank->refcount) != 0)
> +		drm_crtc_vblank_put(crtc);

This is the kind of thing that will be much easier to review when this
patch gets squashed in the one that makes use of these functions.

Even after reading the whole series, this put() doesn't seem correct to
me. What is the problem with having vblanks enabled? Is it because we
were sending duplicate vblank events without these lines? Where is the
get() that triggers this put()? Please help me understand this.


> +
> +	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> +
> +	bdw_enable_pipe_irq(dev_priv, pipe, GEN9_PIPE_PLANE1_FLIP_DONE);
> +
> +	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> +
> +}
> +
>  /* Called from drm generic code, passed 'crtc' which
>   * we use as a pipe index
>   */
> @@ -2686,6 +2707,20 @@ void bdw_disable_vblank(struct drm_crtc *crtc)
>  	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
>  }
>  
> +
> +void icl_disable_flip_done(struct drm_crtc *crtc)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
> +	enum pipe pipe = to_intel_crtc(crtc)->pipe;
> +	unsigned long irqflags;
> +
> +	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> +
> +	bdw_disable_pipe_irq(dev_priv, pipe, GEN9_PIPE_PLANE1_FLIP_DONE);
> +
> +	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> +}
> +
>  static void ibx_irq_reset(struct drm_i915_private *dev_priv)
>  {
>  	struct intel_uncore *uncore = &dev_priv->uncore;
> @@ -3375,7 +3410,7 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
>  		de_port_masked |= CNL_AUX_CHANNEL_F;
>  
>  	de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
> -					   GEN8_PIPE_FIFO_UNDERRUN;
> +			  GEN8_PIPE_FIFO_UNDERRUN | GEN9_PIPE_PLANE1_FLIP_DONE;

This is going to set this bit for gen8 too, which is something we
probably don't want since it doesn't exist there.

The patch also does not add the handler for the interrupt, which
doesn't make sense (see my point above).

Also, don't we want to do like GEN8_PIPE_VBLANK and also set it on the
power_well_post_enable hook? If not, why? This is probably a case we
should write an IGT subtest for.

>  
>  	de_port_enables = de_port_masked;
>  	if (IS_GEN9_LP(dev_priv))
> diff --git a/drivers/gpu/drm/i915/i915_irq.h b/drivers/gpu/drm/i915/i915_irq.h
> index 812c47a9c2d6..6fc319980dd3 100644
> --- a/drivers/gpu/drm/i915/i915_irq.h
> +++ b/drivers/gpu/drm/i915/i915_irq.h
> @@ -114,11 +114,13 @@ int i915gm_enable_vblank(struct drm_crtc *crtc);
>  int i965_enable_vblank(struct drm_crtc *crtc);
>  int ilk_enable_vblank(struct drm_crtc *crtc);
>  int bdw_enable_vblank(struct drm_crtc *crtc);
> +void icl_enable_flip_done(struct drm_crtc *crtc);
>  void i8xx_disable_vblank(struct drm_crtc *crtc);
>  void i915gm_disable_vblank(struct drm_crtc *crtc);
>  void i965_disable_vblank(struct drm_crtc *crtc);
>  void ilk_disable_vblank(struct drm_crtc *crtc);
>  void bdw_disable_vblank(struct drm_crtc *crtc);
> +void icl_disable_flip_done(struct drm_crtc *crtc);
>  
>  void gen2_irq_reset(struct intel_uncore *uncore);
>  void gen3_irq_reset(struct intel_uncore *uncore, i915_reg_t imr,

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux