On 2020-02-06 at 22:30:27 +0530, Ramalingam C wrote:
> On 2020-02-06 at 20:34:41 +0530, Anshuman Gupta wrote:
> > HDCP Repeater initializes seq_num_V to 0 at the beginning of
> > hdcp Session i.e. after AKE_init received.
> >
> > HDCP 2.2 Comp specs 1B-06 test verifies that whether DUT
> > considers failures of authentication if the repeater provides a
> > non-zero value in seq_num_V in the first,
> > RepeaterAuth_Send_ReceiverID_List message after first AKE_Init.
> > Fixing this broken test.
> Instead of "Fixing the broken test" could we say, we mandate the first
> seq_num_v to be zero? in fact i would keep this as commit subject also.
> >
> > Cc: Ramalingam C <ramalingam.c@xxxxxxxxx>
> > Signed-off-by: Anshuman Gupta <anshuman.gupta@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/display/intel_display_types.h | 3 +++
> > drivers/gpu/drm/i915/display/intel_hdcp.c | 13 +++++++++++++
> > 2 files changed, 16 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index 7ae0bc8b80d1..2ae540e986ba 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -360,6 +360,9 @@ struct intel_hdcp {
> > /* HDCP2.2 Encryption status */
> > bool hdcp2_encrypted;
> >
> > + /* Flag indicate if it is a first ReceiverID_List msg after AKE_Init */
> > + bool first_recvid_msg;
> This extra flag is not needed, see below comment
> > +
> > /*
> > * Content Stream Type defined by content owner. TYPE0(0x0) content can
> > * flow in the link protected by HDCP2.2 or HDCP1.4, where as TYPE1(0x1)
> > diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
> > index 4d1a33d13105..3e24a6df503a 100644
> > --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> > @@ -1251,6 +1251,8 @@ static int hdcp2_authentication_key_exchange(struct intel_connector *connector)
> > size_t size;
> > int ret;
> >
> > + hdcp->first_recvid_msg = true;
> > +
> > /* Init for seq_num */
> > hdcp->seq_num_v = 0;
> > hdcp->seq_num_m = 0;
> > @@ -1462,6 +1464,16 @@ int hdcp2_authenticate_repeater_topology(struct intel_connector *connector)
> > seq_num_v =
> > drm_hdcp_be24_to_cpu((const u8 *)msgs.recvid_list.seq_num_v);
> >
> > + /*
> > + * HDCP 2.2 Spec HDMI PAGE 19, DP PAGE 20
> > + * HDCP 2.2 Comp 1B-06 test requires to disable encryption if there is
> > + * non zero seq_num_V from recevier.
> IMHO In commit message this kind of reasoning make sense, but here this is
> not needed. As every line in the file will be as per the spec so we dont
> need to call them out.
> > + */
> > + if (hdcp->first_recvid_msg && seq_num_v) {
> if (!hdcp->seq_num_v && seq_num_v) {
>
> IMO This is all we need it.
I had tried this as my first solution, eventually this fill the link integrity check, see below.
>
> -Ram
> > + drm_dbg_kms(&dev_priv->drm, "Non zero Seq_num_v at beginning of HDCP Session\n");
> > + return -EINVAL;
> > + }
> > +
> > if (seq_num_v < hdcp->seq_num_v) {
> > /* Roll over of the seq_num_v from repeater. Reauthenticate. */
> > DRM_DEBUG_KMS("Seq_num_v roll over.\n");
> > @@ -1484,6 +1496,7 @@ int hdcp2_authenticate_repeater_topology(struct intel_connector *connector)
> > return ret;
> >
> > hdcp->seq_num_v = seq_num_v;
seq_num_v will be zero for first session, which left hdcp->seq_num_v to zero and that will
fail the link intergrity check as at during link intergrity check seq_num_v will be non-zero,
this happens during 1B-09, when repeater topolgy changes due to Roll over of seq_num_v.
Thanks ,
Anshuman Gupta.
> > + hdcp->first_recvid_msg = false;
> > ret = shim->write_2_2_msg(intel_dig_port, &msgs.rep_ack,
> > sizeof(msgs.rep_ack));
> > if (ret < 0)
> > --
> > 2.24.0
> >
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
