On Sun, Feb 02, 2020 at 11:47:56PM -0800, Manasi Navare wrote:
> If one of the synced crtcs needs a full modeset, we need
> to make sure all the synced crtcs are forced a full
> modeset.
>
> v2:
> * Add tiles based on cpu_trans check (Ville)
>
> Suggested-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 85 -----------
> drivers/gpu/drm/i915/display/intel_dp.c | 142 ++++++++++++++++++-
> 2 files changed, 141 insertions(+), 86 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index a943787167de..6383d1287472 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14669,76 +14669,6 @@ static bool intel_cpu_transcoders_need_modeset(struct intel_atomic_state *state,
> return false;
> }
>
> -static int
> -intel_modeset_all_tiles(struct intel_atomic_state *state, int tile_grp_id)
> -{
> - struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> - struct drm_connector *connector;
> - struct drm_connector_list_iter conn_iter;
> - int ret = 0;
> -
> - drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> - drm_for_each_connector_iter(connector, &conn_iter) {
> - struct drm_connector_state *conn_state;
> - struct drm_crtc_state *crtc_state;
> -
> - if (!connector->has_tile ||
> - connector->tile_group->id != tile_grp_id)
> - continue;
> - conn_state = drm_atomic_get_connector_state(&state->base,
> - connector);
> - if (IS_ERR(conn_state)) {
> - ret = PTR_ERR(conn_state);
> - break;
> - }
> -
> - if (!conn_state->crtc)
> - continue;
> -
> - crtc_state = drm_atomic_get_crtc_state(&state->base,
> - conn_state->crtc);
> - if (IS_ERR(crtc_state)) {
> - ret = PTR_ERR(crtc_state);
> - break;
> - }
> - crtc_state->mode_changed = true;
> - ret = drm_atomic_add_affected_connectors(&state->base,
> - conn_state->crtc);
> - if (ret)
> - break;
> - }
> - drm_connector_list_iter_end(&conn_iter);
> -
> - return ret;
> -}
> -
> -static int
> -intel_atomic_check_tiled_conns(struct intel_atomic_state *state)
> -{
> - struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> - struct drm_connector *connector;
> - struct drm_connector_state *old_conn_state, *new_conn_state;
> - int i, ret;
> -
> - if (INTEL_GEN(dev_priv) < 11)
> - return 0;
> -
> - /* Is tiled, mark all other tiled CRTCs as needing a modeset */
> - for_each_oldnew_connector_in_state(&state->base, connector,
> - old_conn_state, new_conn_state, i) {
> - if (!connector->has_tile)
> - continue;
> - if (!intel_connector_needs_modeset(state, connector))
> - continue;
> -
> - ret = intel_modeset_all_tiles(state, connector->tile_group->id);
> - if (ret)
> - return ret;
> - }
> -
> - return 0;
> -}
> -
> /**
> * intel_atomic_check - validate state object
> * @dev: drm device
> @@ -14767,21 +14697,6 @@ static int intel_atomic_check(struct drm_device *dev,
> if (ret)
> goto fail;
>
> - /**
> - * This check adds all the connectors in current state that belong to
> - * the same tile group to a full modeset.
> - * This function directly sets the mode_changed to true and we also call
> - * drm_atomic_add_affected_connectors(). Hence we are not explicitly
> - * calling drm_atomic_helper_check_modeset() after this.
> - *
> - * Fixme: Handle some corner cases where one of the
> - * tiled connectors gets disconnected and tile info is lost but since it
> - * was previously synced to other conn, we need to add that to the modeset.
> - */
> - ret = intel_atomic_check_tiled_conns(state);
> - if (ret)
> - goto fail;
> -
> for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> new_crtc_state, i) {
> if (!needs_modeset(new_crtc_state)) {
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index f4dede6253f8..07f0374d4409 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -6582,6 +6582,146 @@ void intel_dp_encoder_reset(struct drm_encoder *encoder)
> }
> }
>
> +static int intel_modeset_tile_group(struct intel_atomic_state *state,
> + int tile_group_id)
> +{
> + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> + struct drm_connector_list_iter conn_iter;
> + struct drm_connector *connector;
> + int ret = 0;
> +
> + drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> + drm_for_each_connector_iter(connector, &conn_iter) {
> + struct drm_connector_state *conn_state;
> + struct intel_crtc_state *crtc_state;
> + struct intel_crtc *crtc;
> +
> + if (!connector->has_tile ||
> + connector->tile_group->id != tile_group_id)
> + continue;
> +
> + conn_state = drm_atomic_get_connector_state(&state->base,
> + connector);
> + if (IS_ERR(conn_state)) {
> + ret = PTR_ERR(conn_state);
> + break;
> + }
> +
> + crtc = to_intel_crtc(conn_state->crtc);
> +
> + if (!crtc)
> + continue;
> +
> + crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
I think this could just be get_new_crtc_state() since
drm_atomic_get_connector_state() should have added the
connector's crtc already to the state. Which would let us
get rid of the error handling here.
> + if (IS_ERR(crtc_state)) {
> + ret = PTR_ERR(crtc_state);
> + break;
> + }
> +
> + crtc_state->uapi.mode_changed = true;
> +
> + ret = drm_atomic_add_affected_planes(&state->base, &crtc->base);
> + if (ret)
> + break;
> + }
> + drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> +
> + return ret;
> +}
> +
> +static int intel_modeset_affected_transcoders(struct intel_atomic_state *state, u8 transcoders)
> +{
> + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> + struct intel_crtc *crtc;
> +
> + if (transcoders == 0)
> + return 0;
> +
> + for_each_intel_crtc(&dev_priv->drm, crtc) {
> + struct intel_crtc_state *crtc_state;
> + int ret;
> +
> + crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
> + if (IS_ERR(crtc_state))
> + return PTR_ERR(crtc_state);
> +
> + if (!crtc_state->hw.enable)
> + continue;
> +
> + if (!(transcoders & BIT(crtc_state->cpu_transcoder)))
> + continue;
> +
> + crtc_state->uapi.mode_changed = true;
> +
> + ret = drm_atomic_add_affected_connectors(&state->base, &crtc->base);
> + if (ret)
> + return ret;
> +
> + ret = drm_atomic_add_affected_planes(&state->base, &crtc->base);
> + if (ret)
> + return ret;
> +
> + transcoders &= ~BIT(crtc_state->cpu_transcoder);
> + }
> +
> + WARN_ON(transcoders != 0);
> +
> + return 0;
> +}
> +
> +static int intel_modeset_synced_crtcs(struct intel_atomic_state *state,
> + struct drm_connector *connector)
> +{
> + const struct drm_connector_state *old_conn_state =
> + drm_atomic_get_old_connector_state(&state->base, connector);
> + const struct intel_crtc_state *old_crtc_state;
> + struct intel_crtc *crtc;
> + u8 transcoders;
> +
> + crtc = to_intel_crtc(old_conn_state->crtc);
> + if (!crtc)
> + return 0;
> +
> + old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc);
> +
> + if (!old_crtc_state->hw.active)
> + return 0;
> +
> + transcoders = old_crtc_state->sync_mode_slaves_mask;
> + if (old_crtc_state->master_transcoder != INVALID_TRANSCODER)
> + transcoders |= BIT(old_crtc_state->master_transcoder);
> +
> + return intel_modeset_affected_transcoders(state,
> + transcoders &
> + ~BIT(old_crtc_state->cpu_transcoder));
As I said in the previous review cycle the '&~BIT(cpu_trans)' should
be a nop. So can just drop it.
Otherwise
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> +}
> +
> +static int intel_dp_connector_atomic_check(struct drm_connector *conn,
> + struct drm_atomic_state *_state)
> +{
> + struct drm_i915_private *dev_priv = to_i915(conn->dev);
> + struct intel_atomic_state *state = to_intel_atomic_state(_state);
> + int ret;
> +
> + ret = intel_digital_connector_atomic_check(conn, &state->base);
> + if (ret)
> + return ret;
> +
> + if (INTEL_GEN(dev_priv) < 11)
> + return 0;
> +
> + if (!intel_connector_needs_modeset(state, conn))
> + return 0;
> +
> + if (conn->has_tile) {
> + ret = intel_modeset_tile_group(state, conn->tile_group->id);
> + if (ret)
> + return ret;
> + }
> +
> + return intel_modeset_synced_crtcs(state, conn);
> +}
> +
> static const struct drm_connector_funcs intel_dp_connector_funcs = {
> .force = intel_dp_force,
> .fill_modes = drm_helper_probe_single_connector_modes,
> @@ -6598,7 +6738,7 @@ static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs =
> .detect_ctx = intel_dp_detect,
> .get_modes = intel_dp_get_modes,
> .mode_valid = intel_dp_mode_valid,
> - .atomic_check = intel_digital_connector_atomic_check,
> + .atomic_check = intel_dp_connector_atomic_check,
> };
>
> static const struct drm_encoder_funcs intel_dp_enc_funcs = {
> --
> 2.19.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
