On Sat, Feb 01, 2020 at 10:31:59AM +0000, Chris Wilson wrote: > To write to the DISPLAY_PHY_CONTROL requires holding the powerwells, > which during early resume we have not yet acquired until later in > intel_display_power_init_hw(). So compute the initial chv_phy_control, > but leave the HW unset until we first acquire the powerwell. > > <7> [120.055984] i915 0000:00:02.0: [drm:intel_power_domains_init_hw [i915]] rawclk rate: 200000 kHz > <4> [120.056381] ------------[ cut here ]------------ > <4> [120.056621] i915 0000:00:02.0: Unclaimed write to register 0x1e0100 > <4> [120.056924] WARNING: CPU: 1 PID: 164 at drivers/gpu/drm/i915/intel_uncore.c:1166 __unclaimed_reg_debug+0x69/0x80 [i915] > <4> [120.056935] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic btusb btrtl btbcm btintel i915 bluetooth coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel snd_intel_dspcfg snd_hda_codec ghash_clmulni_intel snd_hwdep ecdh_generic ecc snd_hda_core r8169 snd_pcm lpc_ich realtek pinctrl_cherryview i2c_designware_pci prime_numbers > <4> [120.057027] CPU: 1 PID: 164 Comm: kworker/u4:3 Tainted: G U 5.5.0-CI-CI_DRM_7854+ #1 > <4> [120.057038] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0055.2016.0812.1130 08/12/2016 > <4> [120.057058] Workqueue: events_unbound async_run_entry_fn > <4> [120.057275] RIP: 0010:__unclaimed_reg_debug+0x69/0x80 [i915] > <4> [120.057289] Code: 48 8b 78 18 48 8b 5f 50 48 85 db 74 2d e8 1f a0 3f e1 45 89 e8 48 89 e9 48 89 da 48 89 c6 48 c7 c7 00 8c 48 a0 e8 67 82 df e0 <0f> 0b 83 2d ce e2 2b 00 01 5b 5d 41 5c 41 5d c3 48 8b 1f eb ce 66 > <4> [120.057301] RSP: 0018:ffffc90000bcfd08 EFLAGS: 00010082 > <4> [120.057315] RAX: 0000000000000000 RBX: ffff888079919b60 RCX: 0000000000000003 > <4> [120.057326] RDX: 0000000080000003 RSI: 0000000000000000 RDI: 00000000ffffffff > <4> [120.057336] RBP: ffffffffa04c9f4e R08: 0000000000000000 R09: 0000000000000001 > <4> [120.057348] R10: 0000000025c3d560 R11: 000000006815f798 R12: 0000000000000000 > <4> [120.057359] R13: 00000000001e0100 R14: 0000000000000286 R15: ffffffff8234a76b > <4> [120.057371] FS: 0000000000000000(0000) GS:ffff888074b00000(0000) knlGS:0000000000000000 > <4> [120.057382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > <4> [120.057393] CR2: 000055f4197df0d8 CR3: 000000006f326000 CR4: 00000000001006e0 > <4> [120.057404] Call Trace: > <4> [120.057635] fwtable_write32+0x114/0x1d0 [i915] > <4> [120.057892] intel_power_domains_init_hw+0x4ff/0x650 [i915] > <4> [120.058150] intel_power_domains_resume+0x3d/0x70 [i915] > <4> [120.058363] i915_drm_resume_early+0x97/0xd0 [i915] > <4> [120.058575] ? i915_resume_switcheroo+0x30/0x30 [i915] > <4> [120.058594] dpm_run_callback+0x64/0x280 > <4> [120.058626] device_resume_early+0xa7/0xe0 > <4> [120.058652] async_resume_early+0x14/0x40 > > Closes: https://gitlab.freedesktop.org/drm/intel/issues/1089 > Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx> > Cc: Imre Deak <imre.deak@xxxxxxxxx> > --- > drivers/gpu/drm/i915/display/intel_display_power.c | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c > index 64943179c05e..492668d5a193 100644 > --- a/drivers/gpu/drm/i915/display/intel_display_power.c > +++ b/drivers/gpu/drm/i915/display/intel_display_power.c > @@ -5163,11 +5163,10 @@ static void chv_phy_control_init(struct drm_i915_private *dev_priv) > dev_priv->chv_phy_assert[DPIO_PHY1] = true; > } > > - intel_de_write(dev_priv, DISPLAY_PHY_CONTROL, > - dev_priv->chv_phy_control); > - > drm_dbg_kms(&dev_priv->drm, "Initial PHY_CONTROL=0x%08x\n", > dev_priv->chv_phy_control); > + > + /* Defer application of initial phy_control to enabling the powerwell */ Can't recall if there was a specific reason for wanting to write this immediately. Maybe not. At least all the asserts are after we write the register elsewhere so should trip that stuff. I suppose the other option would be to check that the display power well is enabled before we write this. But this is probably OK. Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> What I don't undestand is what actually changed to cause this? Did we reorganize something in the init/resume sequence that previously forced the display power well on before this point, or did we simply not check for the unclaimed reg access? > } > > static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv) > -- > 2.25.0 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
