Re: [PATCH 3/3] drm/i915/dp: Add all tiled and port sync conns to modeset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 31, 2020 at 07:53:23PM +0200, Ville Syrjälä wrote:
> On Fri, Jan 31, 2020 at 09:15:47AM -0800, Manasi Navare wrote:
> > If one of the synced crtcs needs a full modeset, we need
> > to make sure all the synced crtcs are forced a full
> > modeset.
> > 
> > Suggested-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/display/intel_display.c |  88 +------------
> >  drivers/gpu/drm/i915/display/intel_dp.c      | 131 ++++++++++++++++++-
> >  2 files changed, 131 insertions(+), 88 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index e638543f5f87..709a737638b6 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -13123,8 +13123,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
> >  	struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);
> >  	struct drm_connector *connector;
> >  	struct drm_connector_state *connector_state;
> > -	int base_bpp, ret;
> > -	int i, tile_group_id = -1, num_tiled_conns = 0;
> > +	int base_bpp, ret, i;
> >  	bool retry = true;
> >  
> >  	pipe_config->cpu_transcoder =
> > @@ -14559,76 +14558,6 @@ static bool intel_cpu_transcoders_need_modeset(struct intel_atomic_state *state,
> >  	return false;
> >  }
> >  
> > -static int
> > -intel_modeset_all_tiles(struct intel_atomic_state *state, int tile_grp_id)
> > -{
> > -	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > -	struct drm_connector *connector;
> > -	struct drm_connector_list_iter conn_iter;
> > -	int ret = 0;
> > -
> > -	drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> > -	drm_for_each_connector_iter(connector, &conn_iter) {
> > -		struct drm_connector_state *conn_state;
> > -		struct drm_crtc_state *crtc_state;
> > -
> > -		if (!connector->has_tile ||
> > -		    connector->tile_group->id != tile_grp_id)
> > -			continue;
> > -		conn_state = drm_atomic_get_connector_state(&state->base,
> > -							    connector);
> > -		if (IS_ERR(conn_state)) {
> > -			ret =  PTR_ERR(conn_state);
> > -			break;
> > -		}
> > -
> > -		if (!conn_state->crtc)
> > -			continue;
> > -
> > -		crtc_state = drm_atomic_get_crtc_state(&state->base,
> > -						       conn_state->crtc);
> > -		if (IS_ERR(crtc_state)) {
> > -			ret = PTR_ERR(crtc_state);
> > -			break;
> > -		}
> > -		crtc_state->mode_changed = true;
> > -		ret = drm_atomic_add_affected_connectors(&state->base,
> > -							 conn_state->crtc);
> > -		if (ret)
> > -			break;
> > -	}
> > -	drm_connector_list_iter_end(&conn_iter);
> > -
> > -	return ret;
> > -}
> > -
> > -static int
> > -intel_atomic_check_tiled_conns(struct intel_atomic_state *state)
> > -{
> > -	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > -	struct drm_connector *connector;
> > -	struct drm_connector_state *old_conn_state, *new_conn_state;
> > -	int i, ret;
> > -
> > -	if (INTEL_GEN(dev_priv) < 11)
> > -		return 0;
> > -
> > -	/* Is tiled, mark all other tiled CRTCs as needing a modeset */
> > -	for_each_oldnew_connector_in_state(&state->base, connector,
> > -					   old_conn_state, new_conn_state, i) {
> > -		if (!connector->has_tile)
> > -			continue;
> > -		if (!intel_connector_needs_modeset(state, connector))
> > -			continue;
> > -
> > -		ret = intel_modeset_all_tiles(state, connector->tile_group->id);
> > -		if (ret)
> > -			return ret;
> > -	}
> > -
> > -	return 0;
> > -}
> > -
> >  /**
> >   * intel_atomic_check - validate state object
> >   * @dev: drm device
> > @@ -14656,21 +14585,6 @@ static int intel_atomic_check(struct drm_device *dev,
> >  	if (ret)
> >  		goto fail;
> >  
> > -	/**
> > -	 * This check adds all the connectors in current state that belong to
> > -	 * the same tile group to a full modeset.
> > -	 * This function directly sets the mode_changed to true and we also call
> > -	 * drm_atomic_add_affected_connectors(). Hence we are not explicitly
> > -	 * calling drm_atomic_helper_check_modeset() after this.
> > -	 *
> > -	 * Fixme: Handle some corner cases where one of the
> > -	 * tiled connectors gets disconnected and tile info is lost but since it
> > -	 * was previously synced to other conn, we need to add that to the modeset.
> > -	 */
> > -	ret = intel_atomic_check_tiled_conns(state);
> > -	if (ret)
> > -		goto fail;
> > -
> >  	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> >  					    new_crtc_state, i) {
> >  		if (!needs_modeset(new_crtc_state)) {
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index f4dede6253f8..7eb4b3dbbcb3 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -6582,6 +6582,135 @@ void intel_dp_encoder_reset(struct drm_encoder *encoder)
> >  	}
> >  }
> >  
> > +static int intel_modeset_tile_group(struct intel_atomic_state *state,
> > +				    int tile_group_id)
> > +{
> > +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > +	struct drm_connector_list_iter conn_iter;
> > +	struct drm_connector *connector;
> > +	int ret = 0;
> > +
> > +	drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> > +	drm_for_each_connector_iter(connector, &conn_iter) {
> > +		struct drm_connector_state *conn_state;
> > +		struct intel_crtc_state *crtc_state;
> > +		struct intel_crtc *crtc;
> > +
> > +		if (!connector->has_tile ||
> > +		    connector->tile_group->id != tile_group_id)
> > +			continue;
> > +
> > +		conn_state = drm_atomic_get_connector_state(&state->base,
> > +							    connector);
> > +		if (IS_ERR(conn_state)) {
> > +			ret = PTR_ERR(conn_state);
> > +			break;
> > +		}
> > +
> > +		crtc = to_intel_crtc(conn_state->crtc);
> > +
> > +		if (!crtc)
> > +			continue;
> > +
> > +		crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
> > +		if (IS_ERR(crtc_state)) {
> > +			ret = PTR_ERR(crtc_state);
> > +			break;
> > +		}
> > +
> > +		crtc_state->uapi.mode_changed = true;
> > +
> > +		ret = drm_atomic_add_affected_planes(&state->base, &crtc->base);
> > +		if (ret)
> > +			break;
> > +	}
> > +	drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> > +
> > +	return ret;
> > +}
> > +
> > +static int intel_modeset_affected_transcoders(struct intel_atomic_state *state, u8 transcoders)
> > +{
> > +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > +	struct intel_crtc *crtc;
> > +
> > +	if (transcoders == 0)
> > +		return 0;
> > +
> > +	for_each_intel_crtc(&dev_priv->drm, crtc) {
> > +		struct intel_crtc_state *crtc_state;
> > +		int ret;
> > +
> > +		if ((transcoders & BIT(crtc->pipe)) == 0)
> > +			continue;
> 
> Dropping the EDP transcoder on the floor here. I think we should just do
> the guaranteed correct thing and look at the cpu_transcoder instead.
> Yes, that does mean we more or less end up adding all crtcs to the state 
> whenever modesetting any synced crtc, but so be it. We can think of ways
> to optimize that later.
>

So should i not even do this check of trans & BIT(crtc->pipe) ? Instead just proceed
to go get the crtc state and then check if trans & BIT(crtc_state->cpu_trans) ?

Or should I keep this as is and then add the second loop like in your branch?
 
> > +
> > +		crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
> > +		if (IS_ERR(crtc_state))
> > +			return PTR_ERR(crtc_state);
> > +
> > +		if (!crtc_state->hw.enable)
> > +			continue;
> > +
> > +		crtc_state->uapi.mode_changed = true;
> > +
> > +		ret = drm_atomic_add_affected_connectors(&state->base, &crtc->base);
> > +		if (ret)
> > +			return ret;
> 
> Missing add_affected_planes() here I think. Or was that guaranteed to be
> done by the helper? Can't recall.
>

No i think i missed it, will add that
 
> > +
> > +		WARN_ON((enum transcoder)crtc->pipe != crtc_state->cpu_transcoder);
> > +
> > +		transcoders &= ~BIT(crtc_state->cpu_transcoder);
> > +	}
> > +
> > +	WARN_ON(transcoders != 0);
> > +
> > +	return 0;
> > +
> > +}
> > +
> > +static int intel_modeset_synced_crtcs(struct intel_atomic_state *state,
> > +				      struct drm_connector *connector)
> > +{
> > +	const struct drm_connector_state *old_conn_state =
> > +		drm_atomic_get_old_connector_state(&state->base, connector);
> > +	const struct intel_crtc_state *old_crtc_state;
> > +	struct intel_crtc *crtc;
> > +
> > +	crtc = to_intel_crtc(old_conn_state->crtc);
> > +	if (!crtc)
> > +		return 0;
> > +
> > +	old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc);
> > +
> > +	if (!old_crtc_state->hw.active)
> > +		return 0;
> > +
> > +	return intel_modeset_affected_transcoders(state,
> > +						  (old_crtc_state->sync_mode_slaves_mask |
> > +						   BIT(old_crtc_state->master_transcoder)) &
> 
> This seems to have the same master==INVALID problem that we faced
> elsewhere already.
>

Yes will have to add the same check and add it only for master_trans != INVALID, will add that
 
> > +						  ~BIT(old_crtc_state->cpu_transcoder));
> 
> I guess this part is redundant. Or can we somehow have our own
> transcoder be included in sync_mode_slaves_mask/master_transcoder?
>

Actually shouldnt it be:

if old_crtc_state->needs_modeset() {
	 then call intel_modeset_affected_transcoders(state,
							(old_crtc_state->sync_mode_slaves_mask |
							 BIT(old_crtc_state->master_transcoder)) &
							~BIT(old_crtc_state->cpu_transcoder));

dont understand why ~BIT(old_crtc_state->cpu_transcoder) is redundant? why do we need to 
force modeset there if we add this needs_modeset check?

Manasi

> > +}
> > +
> > +static int intel_dp_connector_atomic_check(struct drm_connector *conn,
> > +					   struct drm_atomic_state *_state)
> > +{
> > +	struct drm_i915_private *dev_priv = to_i915(conn->dev);
> > +	struct intel_atomic_state *state = to_intel_atomic_state(_state);
> > +	int ret;
> > +
> > +	ret = intel_digital_connector_atomic_check(conn, &state->base);
> > +	if (ret)
> > +		return ret;
> > +
> > +	if (INTEL_GEN(dev_priv) >= 11 && conn->has_tile) {
> > +		ret = intel_modeset_tile_group(state, conn->tile_group->id);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> > +	return intel_modeset_synced_crtcs(state, conn);
> 
> No gen check... Ah, yeah we don't need it because the port sync state
> will be INVALID/0.
> 
> > +}
> > +
> >  static const struct drm_connector_funcs intel_dp_connector_funcs = {
> >  	.force = intel_dp_force,
> >  	.fill_modes = drm_helper_probe_single_connector_modes,
> > @@ -6598,7 +6727,7 @@ static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs =
> >  	.detect_ctx = intel_dp_detect,
> >  	.get_modes = intel_dp_get_modes,
> >  	.mode_valid = intel_dp_mode_valid,
> > -	.atomic_check = intel_digital_connector_atomic_check,
> > +	.atomic_check = intel_dp_connector_atomic_check,
> >  };
> >  
> >  static const struct drm_encoder_funcs intel_dp_enc_funcs = {
> > -- 
> > 2.19.1
> 
> -- 
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux